Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 169759 (May 2, 2021)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   Cart(1)
  

GB/T 11086-2013 (GBT 11086-2013)

Chinese Standard: 'GB/T 11086-2013'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)Related StandardStatusGoogle Book
GB/T 11086-2013English539 Add to Cart Days<=5 Copper and copper alloys -- Terms and definitions GB/T 11086-2013 Valid GB/T 11086-2013
GB/T 11086-2013Chinese22 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

   

BASIC DATA
Standard ID GB/T 11086-2013 (GB/T11086-2013)
Description (Translated English) Copper and copper alloys. Terms and definitions
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard H62
Classification of International Standard 77.150.30
Word Count Estimation 27,222
Older Standard (superseded by this standard) GB/T 11086-1989
Adopted Standard ISO 197-1-1983, MOD; ISO 197-2-1983, MOD; ISO 197-3-1983, MOD; ISO 197-4-1983, MOD; ISO 197-5-1980, MOD;
Drafting Organization Chinalco Luoyang Copper Co., Ltd.
Administrative Organization National Nonferrous Metals Standardization Technical Committee
Regulation (derived from) National Standards Bulletin No. 25 of 2013
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the copper and copper alloy materials, unprocessed products, terms and definitions processed products, production methods and heat treatment methods. This standard applies to copper and copper alloy products.

GB/T 11086-2013
Copper and copper alloys. Terms and definitions
ICS 77.150.30
H62
National Standards of People's Republic of China
Replacing GB/T 11086-1989
Copper and copper alloys term
(ISO 197-1 ~ ISO 197-4. 1983; ISO 197-5. 1980,
Copperandcopperaloys-Termsanddefinitions, MOD)
Issued on. 2013-12-17
2014-09-01 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China released
Table of Contents
Preface Ⅰ
1 Scope 1
2 Materials 2
Unprocessed products 4 3
Processed products 4 5
5 Production Method 10
6 heat treatment 12
Appendix A (informative) This standard reg number and ISO 197-1 ~ ISO 197-4. 1983 and ISO 197-5. 1980 reg
No control 14
Index 17
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard replaces GB/T 11086-1989 "copper and copper alloys term." This standard compared with GB/T 11086-1989, the main changes
as follows.
--- Modify the standard structure of the original standards.
--- General terms and definitions, increasing the free cutting alloy, copper and copper alloy regeneration definitions of terms;
--- Unrefined copper added definitions of terms anode copper to matte, blister copper, the definition of black copper was modified;
--- Deleted refined copper in the copper, oxygen-free copper, definitions of terms deoxidized copper, tough pitch copper;
--- Materials increased copper and copper alloy portion, which increases the copper, oxygen-free copper, deoxidized copper, tough pitch copper, copper micro-alloyed, dispersion
Copper, copper alloy, high definition of the term;
--- Brass (an alloy of copper and zinc), bronze, copper-nickel alloy (copper-nickel alloy) definitions of terms were modified, deleted the term special copper alloys
definition;
--- Part of the original cast into standard unprocessed products;
--- Unprocessed products increased copper cathode, Definition plaster mold castings;
--- Added processed products seamless pipe, welded pipe, coil, inner grooved tube, finned tube, plastic coated copper tube, sheet, plate intraoperative
Definition of Terms;
--- Of pipe, bar, wire definitions were modified;
--- Of sheet, strip, foil thickness to define the scope has been modified;
--- The refining method into the production process, the EW modify electrolytic deposition;
--- Production process increases the casting, continuous casting, semi-continuous casting, sand casting, die casting (die casting), centrifugal casting,
Die casting, low pressure casting, investment casting, die casting plaster casting methods to define these terms;
--- Production process increases the drawing, extrusion, rolling, welding, forging, continuous extrusion processing method definitions of these terms;
--- Hot working, cold working definitions of the terms were modified;
--- In the heat treatment to remove the aging, artificial aging, natural aging, solution treatment and artificial aging (complete heat treatment), quenching technique
language. Increase the recrystallization annealing, softening annealing, metastable heat treatment, quench hardening, tempering, quenching and tempering treatment, strengthening ordered online Yu
Terms and definitions thermal quenching;
--- Definition of annealing, precipitation heat treatment has been modified.
This revised standard adopts ISO 197-1. 1983 "Copper and copper alloys - Terms and definitions - Part 1. Materials", ISO 197-2. 1983
"Copper and copper alloys - Terms and definitions - Part 2. Not processing products (Refinery shapes)", ISO 197-3. 1983 "Copper and copper alloys - Terms
And definitions - Part 3. processed products ", ISO 197-4. 1983" Copper and copper alloys - Terms and definitions - Part 4. Casting "
ISO 197-5. 1980 "Copper and copper alloys - Terms and definitions - Part 5. processing and treatment." This standard and ISO 197-1. 1983,
ISO 197-2. 1983, ISO 197-3. 1983, ISO 197-4. 1983, ISO 197-5. 1980 to modify the degree of consistency. It is easier than
Representing, in information listed in the appendix of this standard clauses and controls list corresponding chapter of the international standards.
The standard in the use of international standards, has been modified, a single vertical line identifies these differences in their terms involved margins
Place. This standard and ISO 197-1. 1983, ISO 197-2. 1983, ISO 197-3. 1983, ISO 197-4. 1983, ISO 197-5. 1980 Phase
Ratio, the main differences are as follows.
--- Changes in the structure of the standard ISO standard will change some terms to apply to our standard formulation;
--- General terms and definitions, increasing the base metal element, cutting alloys, copper and copper alloy regeneration definitions of terms;
--- Unrefined copper added definitions of terms anode copper to matte, blister copper, the definition of black copper was modified;
--- Removed in refined copper electrolytic copper, oxygen-free copper, definitions of terms deoxidized copper, tough pitch copper;
--- Classification of copper and copper alloys were changed, removed copper, copper alloy unrefined definitions of terms, an increase of copper, oxygen-free copper,
Deoxidized copper, tough pitch copper, copper micro-alloyed, diffusion of copper, copper alloy, high definition of the term;
--- Brass (an alloy of copper and zinc), bronze, copper-nickel alloy (copper-nickel alloy) definitions of terms have been changed, removed the term special copper alloys
definition;
--- The ISO standard part into the casting unprocessed products;
--- Unprocessed products increased Definition plaster mold castings;
--- Added processed products seamless pipe, welded pipe, coil, inner grooved tube, finned tube, plastic coated copper tube, sheet, plate intraoperative
Definition of Terms;
--- Of pipe, bar, wire rod were defined change;
--- Of sheet, strip, foil thickness defining the scope of the change;
--- The refining method into the production process;
--- Production process increases the casting, continuous casting, semi-continuous casting, sand casting, die casting (die casting), centrifugal casting,
Die casting, low pressure casting, investment casting, die casting plaster casting methods to define these terms;
--- Production process increases the drawing, extrusion, rolling, welding, forging, continuous extrusion processing method definitions of these terms;
--- Definition of thermal processing, cold were changes;
--- Removed aging, artificial aging, natural aging, solution treatment and artificial aging (complete heat treatment) in the heat treatment, quenching technique
language. Increase the recrystallization annealing, softening annealing, metastable heat treatment, quench hardening, tempering, quenching and tempering treatment, strengthening ordered online Yu
Terms and definitions thermal quenching;
--- Definition of annealing, precipitation heat treatment were changed.
This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) centralized.
This standard is drafted by. Chinalco Luoyang Copper Co., Jiangxi Copper Company Limited, Anhui Xinke New Materials Co. Shares
the company.
The main drafters of this standard. Zhu Yingli, Wang Junfeng, Li Gang, Ge calf, Ding Shunde, Zhou Shuqing, Mao Yiu Tung, Elohim, Yu Xiaolong, Wang Wenjun.
This standard replaces the standards previously issued as follows.
--- GB/T 11086-1989.
Copper and copper alloys term
1 Scope
This standard specifies the copper and copper alloy materials, unprocessed products, the terms and definitions of processed products, production methods and heat treatment methods.
This standard applies to copper and copper alloy products.
2 Materials
2.1 General terms and definitions
2.1.1
Alloy aloy
By the matrix metal elements and alloys containing metallic elements and impurities in the material.
2.1.2
Base metal element basicmetalicelement
Quality alloy metal dominant element.
2.1.3
Alloying elements aloyingelement
For the metal has certain characteristics, added to the base metal or non-metallic element or metal element retained in the metals.
2.1.4
Impurity impurity
Present in the metal, but not intentionally added or retained metal element or non-metallic elements.
2.1.5
Processing (deformation) alloy wroughtaloy
Mainly used by heat, cold plastic deformation of the alloy production and processing of products.
2.1.6
Cast alloy castingaloy
Mainly used in the production of alloy castings.
2.1.7
Master alloys masteraloy
As an additive material added to the molten metal, for regulating or controlling the chemical composition of the alloy.
2.1.8
Heat-treatable (strengthened) alloy heat-treatablealoy
The alloy is reinforced by appropriate heat treatment.
2.1.9
Non-heat-treated (strengthened) alloy non-heat-treatablealoy
Only strengthened by cold working, the alloy can not substantially be enhanced by heat treatment.
2.1.10
Cutting alloy free-cuttingaloy
By alloy composition and heat treatment design, easy to alloy machining. When the alloy is machined with a lower anti-cutting
Related standard: GB/T 11091-2014    GB/T 11090-2013
Related PDF sample: GB/T 11091-2014    GB/T 8890-2015