|
US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 4706.104-2010: Household and similar electrical appliances -- Safety -- Particular requirements for heated gullies for roof drainage
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 4706.104-2010 | English | 194 |
Add to Cart
|
3 days [Need to translate]
|
Household and similar electrical appliances -- Safety -- Particular requirements for heated gullies for roof drainage
| Valid |
GB 4706.104-2010
|
PDF similar to GB 4706.104-2010
Basic data | Standard ID | GB 4706.104-2010 (GB4706.104-2010) | | Description (Translated English) | Household and similar electrical appliances -- Safety -- Particular requirements for heated gullies for roof drainage | | Sector / Industry | National Standard | | Classification of Chinese Standard | Y63 | | Classification of International Standard | 97.100.01 | | Word Count Estimation | 10,144 | | Date of Issue | 2011-01-14 | | Date of Implementation | 2011-09-15 | | Quoted Standard | GB 4706.1-2005; GB/T 2423.18-2000 | | Adopted Standard | IEC 60335-2-83-2008, IDT | | Regulation (derived from) | Announcement of Newly Approved National Standards No. 2 of 2011 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard provides for household and similar purposes heated roof drainage gutters safe. This standard applies to appliances rated voltage not exceeding 250 V, used for the roof, balcony or similar structure trench drainage system electrically heated deicing gutters. This standard relates to common hazards presented by appliances are in and around the home environment all the people that you may encounter. | GB 4706.104-2010: Household and similar electrical appliances -- Safety -- Particular requirements for heated gullies for roof drainage
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Household and similar electrical appliances.Safety.Particular requirements for heated gullies for roof drainage
ICS 97.100.01
Y63
National Standards of People's Republic of China
Household and similar electrical appliances - Safety
Particular requirements for roof drainage heated drain groove
(IEC 60335-2-83.2008, IDT)
Published 2011-01-14
2011-09-15 implementation
Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China
Standardization Administration of China issued
Table of Contents
Preface Ⅰ
1 Scope 1
2 Normative References 1
Terms and definitions 1 3
4 General Requirements 1
General conditions for 5 tests 2
6 Category 2
7 Marking and instructions 2
8 Protection against touching live parts of 2
9 start electric appliances 2
10 Power input and current 2
11 heat 2
12 Void 3
Leakage current and electric strength at the operating temperature of 13 3
14 Transient overvoltages 3
3 15 Moisture resistance
16 Leakage current and electric strength 3
Transformer 17 and associated circuitry overload 3
18 Endurance 3
19 Abnormal operation 3
3 20 Stability and mechanical hazards
21 Mechanical strength 3
Structure 22 4
Internal wiring 23 4
24 elements 4
25 and the external power connection cord 4
26 with the external lead terminal 4
27 Provision for earthing 4
28 and the connecting screw 4
Clearances 29, creepage distances and solid insulation 4
30 and fire resistant 5
5 31 rust
32 radiation, toxicity and similar hazards 5
Appendix 6
Reference 7
Foreword
All technical contents of this section is mandatory.
GB 4706 "and similar household electrical appliances," it consists of several components, Part 1 General Requirements for the other parts of special
Claim.
This part is a first portion 104 of the GB 4706.
This section should GB 4706.1-2005. with "safe 1 Household and similar electrical appliances General requirements."
This section drafted in accordance with the rules GB/T 1.1-2009 given.
This section uses the translation method is equivalent to using IEC 60335-2-83.2001 "Safety Section 2-83 and similar household electrical appliances. House
Heating the top drainage groove drain special requirements ", including its Addendum 1 (2008), concerning the terms of addendum has on its outside by page
Margin position vertical wire (|) were marked.
This section made the following editorial changes.
--- consistent with the existing standard series, the standard name will be changed to "roof drainage safety of household and similar electrical appliances with heating and drainage
Tank special requirements. "
Please note that some of the content of this document may involve patents. The issuing authority of this document does not assume responsibility to identify these patents.
This section was proposed by China Light Industry Federation.
This part of the jurisdiction of the National Standardization Technical Committee appliances (SAC/TC46).
This part of the drafting units. China Household Electrical Appliances Research Institute, Shanghai Entry-Exit Inspection and Quarantine Bureau Electrical Products Testing Center, Shenzhen inspection
Inspection and quarantine Academy of Science.
The main drafters of this section. Ma Dejun, Fu Peigang, Hu Zhiqiang, Zhang Dong.
Household and similar electrical appliances - Safety
Particular requirements for roof drainage heated drain groove
1 Scope
GB 4706.1-2005 in this chapter replaced by the following.
This section provides security Household and similar roof drainage heated drain grooves.
This section applies to the appliance does not exceed the rated voltage of 250V, it is used for the drainage trenches roof, terrace or the like of the deicing
Electrically heated drain groove.
Common hazards presented by the appliances covered in this section, is in and around the home environments of all people may experience. however,
Generally this section does not cover.
--- people (including children) attributable to.
●, perception or mental capacity of the body; or
● lack of experience and knowledge.
It can not be used safely in danger when the appliance without supervision or instruction;
--- children playing instruments situation.
Note 1. It should be noted, additional requirements by the state health department, responsible for the protection of labor, the national water sector and similar sectors provisions.
Note 2. This part is not intended to be used to implement the special environment, such as a corrosive or explosive atmosphere (dust, vapor or gas).
2 Normative references
The following documents for the application of this document is essential. For dated references, only applies to the version dated paper
Pieces. For undated references, the latest edition (including any amendments) applies to this document.
GB 4706.1-2005 in this chapter except as follows, are applicable.
increase.
GB/T 2423.18-2000 Environmental testing for electric and electronic products - Part 2. Test Test Kb. Salt mist, cyclic (sodium chloride
Solution) (idtIEC 60068-2-52.1996)
3 Terms and Definitions
The following terms and definitions apply to this document.
GB 4706.1-2005 in this chapter except as follows, are applicable.
3.19 instead of.
Work normaloperation
Appliance top surface of the insulating capability to work 1.25m2K/W ± 0.3m2K/W is covered with the insulating layer.
4 General requirements
This chapter in GB 4706.1-2005 is applicable.
General conditions for 5 tests
GB 4706.1-2005 in this chapter except as follows, are applicable.
5.6 Addition.
The short-circuit temperature control means.
5.7 Addition.
Tests specified in Chapter 10, Chapter 11, Chapter 13, Section 19 to be carried out at ambient temperature ± 2 ℃ 40 ℃.
Category 6
GB 4706.1-2005 in this chapter except as follows, are applicable.
6.1 Review.
As a class should implement Ⅰ, Ⅱ Ⅲ class or classes of appliances.
6.2 Review.
Waterproof rating of the appliance should be at least IPX7.
7 Marking and instructions
This chapter in GB 4706.1-2005 is applicable.
8 Protection against access to live parts
This chapter in GB 4706.1-2005 is applicable.
9 start electric appliances
This chapter in GB 4706.1-2005 is applicable.
Power input and current 10
This chapter in GB 4706.1-2005 is applicable.
11 fever
GB 4706.1-2005 in this chapter except as follows, are applicable.
11.7 Replacement.
The appliance is operated until steady conditions are established.
11.8 increase.
Temperature instruments shall not exceed the values in Table 3 minus 15K.
Surface of the apparatus housing, comprising a rear mounting site inaccessible, the temperature rise should not exceed 60K.
12 Void
Leakage current and electric strength at the operating temperature of 13
This chapter in GB 4706.1-2005 is applicable.
14 transient overvoltage
This chapter in GB 4706.1-2005 is applicable.
15 Moisture resistance
GB 4706.1-2005 in this chapter except as follows, are applicable.
15.1.2 increase.
Not intended to be exposed to the outside of the drainage member, before this test should be performed on the instrument seal.
16 Leakage current and electric strength
This chapter in GB 4706.1-2005 is applicable.
Overload protection of transformers and associated circuitry 17
This chapter in GB 4706.1-2005 is applicable.
18 Endurance
This chapter in GB 4706.1-2005 is applicable.
19 Abnormal operation
This chapter in GB 4706.1-2005 is applicable.
20 Stability and mechanical hazards
This chapter in GB 4706.1-2005 is applicable.
21 Mechanical strength
GB 4706.1-2005 in this chapter except as follows, are applicable.
21.1 increase.
This experiment was repeated at an ambient temperature of -25 ℃.
22 Construction
GB 4706.1-2005 in this chapter except as follows, are applicable.
22.101 heating elements should not detachable member.
To determine whether it is checked by inspection and manual test.
Internal wiring 23
This chapter in GB 4706.1-2005 is applicable.
Element 24
GB 4706.1-2005 in this chapter except as follows, are applicable.
19.4 24.101 To meet the necessary heat should be non-self-resetting thermal circuit breaker the circuit breaker.
To determine whether it is checked by inspection and test of 19.4.
25 and the external power connection cord
GB 4706.1-2005 in this chapter except as follows, are applicable.
25.1 Review.
The appliance should not provide an appliance inlet or outlet for insertion into the output pins.
25.5 increase.
Allowing Z-connected.
External terminal conductors 26
This chapter in GB 4706.1-2005 is applicable.
27 earthing
GB 4706.1-2005 in this chapter except as follows, are applicable.
27.1 increase.
All the conductive member may be exposed to the water discharged from the Class I appliances should be reliably connected to the ground terminal.
28 and screw connection
This chapter in GB 4706.1-2005 is applicable.
Clearances 29, creepage distances and solid insulation
This chapter in GB 4706.1-2005 is applicable.
30 Resistance to heat and fire
GB 4706.1-2005 in this chapter except as follows, are applicable.
30.2.2 Not applicable.
31 rust
GB 4706.1-2005 in this chapter except as follows, are applicable.
increase.
2 is a salt spray test to determine whether it is qualified by GB/T 2423.18-2000 in severity.
Before the test, characterize the coating with hardened needle. Needle end portion has a conical apex angle of 40 °, a radius of a rounded tip
0.25mm ± 0.02mm. Applying an appropriate load to the needle, so the force applied axially to 10N ± 0.5N. Along coating table
Plane at a rate of about 20mm/s drag needle, scoring five scratches, scratches distance of at least 5mm, and at least 5mm from the edge.
After the test, the appliance should not affect the degree of damage to this part of the accord, especially Chapters 8 and 27. Coating should not rupture or from
Loose metal surface.
32 radiation, toxicity and similar hazards
This chapter in GB 4706.1-2005 is applicable.
appendix
Appendix GB 4706.1-2005 is applicable.
references
Reference in GB 4706.1-2005 except as follows, are applicable.
Evaluation Method The reaction of human contact with the surface Ergonomics ISO 13732-1 Part 1 thermal environment. the hot surface
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 4706.104-2010_English be delivered?Answer: Upon your order, we will start to translate GB 4706.104-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 4706.104-2010_English with my colleagues?Answer: Yes. The purchased PDF of GB 4706.104-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|