|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 31656.9-2021: National food safety standard - Determination of pendimethalin residue in aquatic products by liquid chromatography-tandem mass spectrometry method
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 31656.9-2021 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
National food safety standard - Determination of pendimethalin residue in aquatic products by liquid chromatography-tandem mass spectrometry method
| Valid |
GB 31656.9-2021
|
PDF similar to GB 31656.9-2021
Basic data | Standard ID | GB 31656.9-2021 (GB31656.9-2021) | | Description (Translated English) | National food safety standard - Determination of pendimethalin residue in aquatic products by liquid chromatography-tandem mass spectrometry method | | Sector / Industry | National Standard | | Classification of Chinese Standard | X20 | | Word Count Estimation | 7,713 | | Issuing agency(ies) | National Health Commission of the People's Republic of China, State Administration for Market Regulation | GB 31656.9-2021: National food safety standard - Determination of pendimethalin residue in aquatic products by liquid chromatography-tandem mass spectrometry method
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
National food safety standards
Determination of pendimethalin residues in aquatic products
Liquid chromatography-tandem mass spectrometry
National Standards of People's Republic of China
Released by the National Health Commission of the People's Republic of China
State Administration for Market Regulation
Ministry of Agriculture and Rural Affairs of the People's Republic of China
Foreword
This document complies with the provisions of GB/T 1:1-2020 "Standardization Work Guidelines Part 1: Structure and Drafting Rules of Standardization Documents"
Drafting:
This document is published for the first time:
National food safety standards
Determination of pendimethalin residues in aquatic products by liquid chromatography-tandem mass spectrometry
1 Scope
This document specifies the sample preparation and liquid chromatography-tandem mass spectrometry methods for detecting pendimethalin residues in aquatic products: This document is applicable to the detection of pendimethalin residues in edible tissues of fish, shrimps, crabs, shells, sea cucumbers, and turtles:
2Normative reference documents
The contents of the following documents constitute essential provisions of this document through normative references in the text: Among them, for dated reference documents, only the version corresponding to the date applies to this document; for undated reference documents, the latest version (including all amendments) applies to this document:
GB/T 6682 Specifications and test methods for water use in analytical laboratories GB/T 30891-2014 Specifications for sampling of aquatic products
3Terms and Definitions
There are no terms or definitions to be defined in this document:
4 Principles
The remaining pendimethalin in the sample was extracted with acetonitrile, purified with HLB solid-phase extraction column, lipid impurities were removed with Ci₈ adsorbent, measured by liquid chromatography-tandem mass spectrometry, and quantified by the internal standard method:
5Reagents and materials
Unless otherwise specified, all reagents are of analytical grade and the water is first-grade water that complies with GB/T 6682:
5:1 Reagents
5:1:1 Acetonitrile (C₂H₃N): chromatographically pure:
5:1:2 Methanol (CH₄O): chromatographically pure:
5:1:3 Formic acid (CH₂O₂): chromatographically pure:
5:1:4 n-hexane (C₆H): chromatographically pure:
5:1:5 Acetone (C₃H₈O): chromatographically pure:
5:1:6 Sodium chloride (NaCl),
5:2 Solution preparation
5:2:1 n-hexane-acetone solution: Take 500 mL of n-hexane and 500 mL of acetone, and mix well:
5:2:2 Formic acid aqueous solution (0:1%): Take 1mL of formic acid and dilute with water to 1000mL:
5:3 Standard products
5:3:1 Pendimethalin (Ci₃Hi₉N₃O₄, CAS No:: 40487-42-1), content ≥98:0%:
5:3:2 Pendimethalin-Ds, C₃H₁₄N₃O₄D₅, CAS number: 1219803-39-0), content ≥98:0%:
5:4 Preparation of standard solution
5:4:1 Standard stock solution (1mg/mL): Take about 10mg of pendimethalin standard, weigh it accurately, dissolve it in acetonitrile and dilute it to a 10mL volumetric flask, shake well, and it is ready: Store away from light at 4℃, valid for 6 months:
5:4:2 Internal standard stock solution (1 mg/mL): Take about 10 mg of the deuterated pendimethalin standard, weigh it accurately, dissolve it with B and dilute it to a 10 mL volumetric flask, shake well, and it is ready: Store away from light at 4℃, valid for 6 months:
5:4:3 Standard intermediate solution (1 μg/mL): Accurately transfer 0:1 mL of the pendimethalin standard stock solution into a 100 mL volumetric flask, dilute to the mark with acetonitrile, and prepare a standard intermediate solution with a concentration of 1 μg/mL: Store at 4°C away from light, valid for 2 weeks:
5:4:4 Internal standard intermediate solution (1 μg/mL): Accurately transfer 0:1 mL of the deuterated pendimethalin standard stock solution into a 100 mL volumetric flask, dilute to the mark with acetonitrile, and prepare an internal standard with a concentration of 1 μg/mL: Intermediate liquid: Store at 4°C away from light, valid for 2 weeks:
5:5 Materials
5:5:1 HLB solid phase extraction column: 60 mg/3mL, or equivalent:
5:5:2 Cs adsorbent: 40μm～60μm:
5:5:3 Microporous filter membrane: 0:22μm, resistant to organic reagents:
6Instruments and Equipment
6:1 Liquid chromatography-tandem mass spectrometer: equipped with electrospray ion source (ESI source):
6:2 Analytical balance: sensitive to 0:01g and 0:00001g:
6:3 Nitrogen blowing instrument:
6:4 Homogenizer:
6:5 Vortex mixer:
6:6 Centrifuge: 10000 r/min or above:
6:7 Ultrasonic oscillator:
6:8 Rotary evaporator:
6:9 Solid phase extraction device:
7 Preparation and preservation of samples
7:1 Preparation of samples
Prepare samples according to the requirements of Appendix B of GB/T 30891-2014:
a) Take a homogeneous test sample as a test material;
b) Take a homogeneous blank sample as a blank sample;
c) Take a homogeneous blank sample, add a standard solution of appropriate concentration, and add the sample as a blank:
7:2 Storage of samples
Store below -18℃:
8 Measurement steps
8:1 Extraction
Weigh 5:0g of the sample (accurate to ±0:02 g), add 50 μL of internal standard working solution, mix well, add 6 mL of water, 1 g of sodium chloride, and 20 mL of acetonitrile in sequence, vortex at 3000 r/min for 1 min, and ultrasonic extraction for 20 min, 4000 Centrifuge at r/min for 10 min: Take the supernatant, add 20 mL of acetonitrile to the residue and repeat the extraction once, and combine the supernatants: Concentrate to near dryness by rotary evaporation at 40°C, add 3 mL of acetonitrile to dissolve the residue, and set aside:
8:2 Purification
Activate the solid phase extraction column with 3 mL of acetonitrile, pass the reserve solution through the column, control the flow rate to not exceed 1 mL/min, elute with 3 mL of acetonitrile, and add 8 mL of n-hexane-acetone solution for elution: Collect the eluate, blow with nitrogen at 40°C until it is nearly dry, add 2 mL of acetonitrile accurately to reconstitute, add 0:5 g of C adsorbent, vortex at 3000 r/min for 1 min, centrifuge at 4000 r/min for 10 min, take the supernatant and 0:22μm filter membrane for liquid chromatography-tandem mass spectrometry measurement:
8:3 Preparation of standard curve
Accurately pipet appropriate amounts of standard working solution and internal standard working solution, dilute with acetonitrile to prepare pendimethalin concentration of 2:5 μg/L,
5:0μg/L, 10:0μg/L, 20:0 μg/L, 50:0μg/L, 100:0μg/L, deuterated pendimethalin concentration is 25:0μg/L series mixture 2
Standard working solution for determination by liquid chromatography-tandem mass spectrometer: Ready to use: Taking the peak area ratio of the test substance and the internal standard substance as the ordinate and the corresponding pendimethalin concentration as the abscissa, draw a standard working curve and find the regression equation and correlation coefficient:
8:4 Determination
8:4:1 Liquid Chromatography Reference Conditions
a) Chromatographic column: Cis column (100mm×2:1 mm, 1:7μm), or equivalent;
b) Column temperature: 40℃;
c) Injection volume: 5pL;
d) Flow rate: 0:5mL/min;
e) Mobile phase: A is acetonitrile, B is formic acid aqueous solution (0:1%);
f) Gradient elution conditions are shown in Table 1:
8:4:2 Mass spectrometry reference conditions
a) Ion source: electrospray ion source (ESI source);
b) Scanning method: positive ion scanning;
c) Detection method: multiple reaction monitoring (MRM);
d) Electrospray voltage: 3000 V;
e) Ion source temperature: 150℃;
f) Desolvation gas temperature: 450℃;
g) The flow rates of desolvation gas, collision gas, auxiliary gas and other gases should be adjusted before use so that the mass spectrometry sensitivity meets the detection requirements;
h) Precursor ions, product ions, cone voltage and collision energy are shown in Table 2:
8:4:3 Determination method
a) Qualitative methods
Qualification is carried out by comparing the retention time and characteristic ions of each component in the sample with the retention time and characteristic ions of each component in the corresponding standard working solution: Under the same test conditions, the relative deviation between the retention time of the positive sample and the retention time of the standard material should be within ±2:5%, and the relative ion abundance detected should be consistent with the relative abundance of the calibration standard of equivalent concentration: The abundance ratio of quantitative and qualitative fragment ions should meet the requirements of Table 3:
b) Quantitative methods
The sample solution and the standard working solution are measured under the same chromatography and mass spectrometry conditions, single-point or multi-point calibration is performed, and the chromatographic peak area is used for quantification and internal standard method calculation: The response values of the target substances in the standard working solution and sample solution should be within the detection linear range of the instrument: See Appendix A for the multiple reaction monitoring spectrum of the standard solution:
8:5 Blank test
Take a blank sample and perform parallel operations using the same measurement steps except that no standard solution is added:
9Result calculation and presentation
The residual amount of the substance to be tested in the sample is calculated according to the standard curve or formula (1):
10 Sensitivity, accuracy and precision of detection methods
10:1 Sensitivity
The detection limit of pendimethalin is 1:0μg/kg, and the limit of quantitation is 2:0μg/kg:
10:2 Accuracy
The recovery rate of pendimethalin at the added concentration of 2 μg/kg to 20 μg/kg is 70% to 120%:
10:3 Precision
The intra-batch relative standard deviation of this method is ≤15%, and the inter-batch relative standard deviation is ≤15%:
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 31656.9-2021_English be delivered?Answer: Upon your order, we will start to translate GB 31656.9-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 31656.9-2021_English with my colleagues?Answer: Yes. The purchased PDF of GB 31656.9-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|