HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB 16690-2008 English PDF

US$559.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 16690-2008: Regional emblem of Hong Kong special administrative region
Status: Valid

GB 16690: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB 16690-2008English559 Add to Cart 5 days [Need to translate] Regional emblem of Hong Kong special administrative region Valid GB 16690-2008
GB 16690-1996EnglishRFQ ASK 9 days [Need to translate] Regional emblem of Hong Kong special administrative region Obsolete GB 16690-1996

PDF similar to GB 16690-2008


Standard similar to GB 16690-2008

GB/T 16903   GB/T 15565   GB/T 15566.1   GB/T 30237   GB/T 30785   GB 15093   

Basic data

Standard ID GB 16690-2008 (GB16690-2008)
Description (Translated English) Regional emblem of Hong Kong special administrative region
Sector / Industry National Standard
Classification of Chinese Standard A22
Classification of International Standard 01.080.10
Word Count Estimation 24,299
Date of Issue 2008-06-19
Date of Implementation 2009-06-01
Older Standard (superseded by this standard) GB 16690-1996
Regulation (derived from) Announcement of Newly Approved National Standards No. 10 of 2008 (total 123)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This Chinese standard relates to suspension of the People's Republic of HKSAR Emblem (hereinafter referred to as the regional emblem) of the technical requirements, test methods, inspection rules, marking and packaging. This standard applies to fiber reinforced plastic or aluminum alloy produced by regional emblem. In print production process of other materials such as flat-screen regional emblem should also refer to the relevant requirements of this standard execution.

GB 16690-2008: Regional emblem of Hong Kong special administrative region

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Regional emblem of Hong Kong special administrative region ICS 01.080.10 A22 National Standards of People's Republic of China Replacing GB 16690-1996 Emblem of Hong Kong Posted 2008-06-19 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

All technical contents of this standard is mandatory. This standard is GB 16690-1996 "emblem of the HKSAR," the amendment. This standard compared with GB 16690-1996 main changes are as follows. --- Original standard Annex A, Annex B be amended to "normative references." Appendix A of this standard is a normative appendix. This standard was proposed by the Hong Kong and Macau Affairs Office. This standard color by the National Standardization Technical Committee. This standard is drafted by. Institute of Psychology, Shenzhen Haichuan Industry Corp.. The main drafters of this standard. Han new cloth, such as Sun Xiu, yellow side, He Weiping Zheng Wei. This standard replaces the standards previously issued as follows. --- GB 16690-1996. Emblem of Hong Kong

1 Scope

This standard specifies the People's Republic of China emblem (hereinafter emblem) of the HKSAR technical requirements for the suspension of the test Methods, inspection rules, signs and packaging. This standard applies to fiber-reinforced plastic or aluminum alloy produced regional emblem. Other materials such as printing craftwork plane Regional Emblem Figure The text should also refer to the relevant requirements of this standard implemented.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. Plastic bending performance test method GB/T 1449 fiber reinforced GB/T 1720 film adhesion assay GB/T 1733 Determination of water resistance of the film (GB/T 1733-1993, neqГOCT9.403. 1980) GB/T 1740 Determination of resistance to wet heat GB/T 1766 Paints and varnish coating aging rating method GB/T 1771 Paints and varnishes - Determination of resistance to neutral salt spray (GB/T 1771-2007, ISO 7253.1996, IDT) Plastic Barcol hardness test GB/T 3854 enhancements Methods of measurement GB/T 3979 object colors Evaluation of two o'clock GB/T 4380-2004 roundness error, three-point method GB/T 6739 Determination of paints and varnishes film hardness pencil method (GB/T 6739-2006, ISO 15184.1998, IDT) GB/T 9274 Paints and varnishes - determination of resistance to liquids (GB/T 9274-1988, eqv ISO 2812. 1974) GB/T 9754 Paints and varnishes contain metal color paint films at 20 °, 60 ° and 85 ° measurement of specular gloss (GB/T 9754-2007, ISO 2813.1994, IDT) GB/T 11186.2-1989 coating color measurement method Part II. Color Measurement (GB/T 11186.2-1989, eqv ISO 7724-2. 1984) GB/T 11186.3-1989 coating color measurement method Part 3. Calculation of color differences (GB/T 11186.3-1989, eqv ISO 7724-3. 1984) GB/T 11337-2004 flatness error detection GB 15093 Emblem The Basic Law of the HKSAR People's Republic of China People's Republic of China Special Administrative Region of the regional flag and regional emblem use Interim Measures

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Characterization of People's Republic of China in the middle of the HKSAR is the five-star establishment bauhinia flower, surrounded by the words "People's Republic of China HKSAR "and English" HongKong "(Hong Kong) emblem. 3.2 Specific reflex zones emblem face Bauhinia flower petals are used than white. 4. Technical Requirements 4.1 emblem shapes and patterns 4.1.1 emblem shapes and patterns should be consistent with the relevant provisions "of the Basic Law of the HKSAR People's Republic of China" in. 4.1.2 The emblem shown in Figure 1. 1 People's Republic of China Hong Kong SAR regional emblem 4.2 standard dimensions and tolerances emblem 4.2.1 Standard emblem various dimensions should follow the "People's Republic of China Hong Kong Special Administrative Regional Flag and Regional Emblem use Interim Measures," the relevant Provisions. 4.2.2 Standard emblem various dimensions and tolerances are shown in Table 1, Figure 2 and Figure 3. 4.2.3 Standard emblem production and data analysis diagram in Appendix A. 4.2.4 need to produce non-standard size emblem, emblem should be standard size and tolerance is proportional to zoom in or out. Table 1 Standard emblem various dimensions and tolerances in millimeters Figure 2 is the code name Project Standard dimensions and tolerances No. 1 on the 23rd Emblem surface diameter  1000 ± 6 800 ± 5 600 ± 4 Red overall thickness T 46 ± 3 36 ± 2 28 ± 1 Red annular narrow width B 10 ± 0.5 8 ± 0.5 6 ± 0.5 Red Bauhinia flower width B1 2.5 ± 1 2 ± 1 1.5 ± 1 Table 1 (continued) millimeters Figure 2 is the code name Project Standard dimensions and tolerances No. 1 on the 23rd Red inner circle diameter 1 780 ± 3 624 ± 2 468 ± 1.5 White bauhinia circumscribed circle diameter 2 600 ± 3 480 ± 2 360 ± 1.5 Red five-pointed star circumscribed circle diameter 3 50 ± 2 40 ± 1.5 30 ± 1 Text area angle α 220 ° ± 1 ° 220 ° ± 1 ° 220 ° ± 1 ° English words zone angle α1 80 ° ± 1 ° 80 ° ± 1 ° 80 ° ± 1 ° Pentagram positioning angle α2 110 ° ± 1 ° 110 ° ± 1 ° 110 ° ± 1 ° Bauhinia flower petals orientation angle α3 14 ° ± 2 ° 14 ° ± 2 ° 14 ° ± 2 ° Logo faces outside bevel α4 5 ° ~ 8 ° 5 ° ~ 8 ° 5 ° ~ 8 ° Chinese, English, five-pointed star target radius R1 440 ± 2 352 ± 1.5 264 ± 1 Text High H 70 ± 2.5 56 ± 2 42 ± 1.5 English alphabet high H1 60 ± 2.5 48 ± 2 36 ± 1.5 Pentagram depth T1 10 ± 1 8 ± 1 5 ± 1 Red inner circle thickness T2 10 ± 1 8 ± 1 5 ± 1 The English word thickness T3 10 ± 1 8 ± 1 5 ± 1 Bauhinia flower petals thickness T4 10 ± 1 8 ± 1 5 ± 1 Bauhinia flower depth T5 3.5 + 0.5 2.5 + 0.5 1.5 + 0.5 Red narrow annular medial thickness T6 15 ± 1 12 ± 1 8 ± 1 Emblem surface roughness E1 2 1.5 1 Emblem face roundness S 3 2 2 Logo bottom surface irregularities E2 5 4 3 Logo on the back of mounting holes M 12 × 1.5 10 × 1.5 8 × 1.25 R is determined by the manufacturer and user consultation 4.3 of the regional emblem color and tolerance 4.3.1 emblem face red. fiber reinforced plastic, aluminum alloy regional emblem red and tolerance respectively in fiber-GB 15093 Strong plastic and aluminum materials red emblem and tolerance prevail. 4.3.2 Bauhinia flower petals White. fiber reinforced plastic, aluminum alloy emblem Bauhinia flower petals white stimulus value Y10 of not less than 80. 4.3.3 Other materials of the regional emblem red and tolerance to aluminum GB 15093 in the red emblem and tolerance prevail. Bauhinia Petals white stimulus value Y10 should be consistent with the provisions of this standard 4.3.2. Figure 2 standard emblem various dimensions Note. The logo on the back area of the radius of the installation hole diameter and installation pitch logo center back is determined after consultation producers and users. Figure 3 a schematic view of the mounting holes on the back of emblem 4.4 chrominance data calculation 4.3 chromaticity data for CIE standard illuminant D65 and CIE1964 standard colorimetric system calculations. 4.5 regional emblem film performance Emblem surface film properties are shown in Table 2. Table 2 logo surface film properties Item Index Film color and appearance of the color line with the standard requirements of 4.3, the film smooth and bright Gloss (60 °) /% > 90 Adhesion/grade > 2 Hardness (Pap) > 2 Weather/level < 1 Water resistance (24h) does not blister, do not fall off Moist heat resistance (7d)/Level 1 Salt spray resistance (7d)/Level 1 4.6 of the regional emblem body material strength 4.6.1 bending strength of not less than 140MPa. 4.6.2 Surface hardness (Pap) not less than 30. 4.6.3 Falling ball impact strength. the regional emblem body no cracks, no damage. 4.7 Evaluation of the appearance of the regional emblem Emblem surface appearance of assessment requirements in Table 3. Table 3 logo surface appearance assessment requirements Project Requirements Emblem surface appearance Surface pattern is clear, there should be no shrinkage, thermal cracking, cold cracking, deformation, exclusion edge, edge damage, there should be no significant effect on the appearance of sand, miscellaneous Quality, porosity Surface color logo should not have obvious stains, take color, color stains, etc. 4.8 regional emblem face red font in English 4.8.1 emblem surface area "Special Administrative Region People's Republic of China" in red font emblem should be consistent with the standard word shown in Figure 4. 4.8.2 regional emblem face English "HONGKONG" (Hong Kong) Red font standards should be consistent with the regional emblem word shown in Figure 4.

4 words emblem surface area of standard English

5 Test methods

Logo ministries pattern size and measurement error of 5.1 standard allows the use of qualified inspection area should, accuracy not less than 0.5% of the measuring tool. 5.2 color measurement should be GB/T 3979, GB/T 11186.2-1989 and GB/T 11186.3-1989 the provisions. 5.3 of the regional emblem film properties should be GB/T 1720, GB/T 1733, GB/T 1740, GB/T 1766, GB/T 1771, GB/T 6739, the provisions of GB/T 9274 and GB/T 9754 were measured. 5.4 Strength Test 5.4.1 Bending strength test should be GB/T 1449 will be. 5.4.2 hardness measurement should be GB/T 3854 will be. 5.4.3 Falling Ball Impact. The positive sample emblem upward, horizontal spread on the concrete floor, away from the sample is placed at a weight above 1m 112g ball, make the ball free fall in the same plane surface portion emblem. Repeat three times to observe the sample surface cracks, deformation, delamination. 5.5 logo emblem face and bottom surface roughness test shall GB/T 11337-2004 carried out in 4.4b method. 5.6 logo body roundness test shall GB/T 4380-2004 2.3 in two-point measurement method. 5.7 surface appearance emblem assessment. it should be bright natural light from the logo face 1m, visual assessment; when assessed in the light not require the use of illumination Lower than 750lx daylight color fluorescent lamps.

6 Inspection rules

6.1 Inspection classification 6.1.1 factory inspection Each side emblem products factory inspection should be carried out at the factory. Factory inspection includes the shape of the emblem, logo design and various dimensions and surface Appearance, color quality assessment. Factory inspection, all test items all Eligible judged as qualified, otherwise unqualified. Substandard goods may not be manufactured. 6.1.2 Type inspection When the material emblem finish formula, production technology logo body changes, the type of inspection should be carried out. All quality requirements specified in Chapter 4 of the full When the Department of qualified judges for the inspection type that allows full production. 7 signs, packaging 7.1 marks Logo on the back of each side area should be marked with the company name and address, product serial number and date of manufacture. 7.2 Packaging 7.2.1 emblem on each side for an individually packaged. Packaging should ensure the quality emblem area from damage, easy to transport and storage. The outer packaging should be indicated yield Product name, size, material, package size, weight, name and address of the manufacturer, trademark and implementation of national standard number, shipping marks. outer When you install the package shall be accompanied by the necessary accessories, installation and storage instructions and inspection certificate. Shall be marked on the inspection certificate emblem specifications, materials Quality, product number, date of manufacture, manufacturer name and address, trademark, inspector name (or code). 7.2.2 Bulk packaging emblem emblem should ensure the quality of area from damage, easy to transport. Shall be marked on the outer packaging the product name, size, material Quality, quantity, package size, weight, name and address of the manufacturer, shipping marks.

Appendix A

(Normative) Hong Kong SAR People's Republic of China Emblem making analysis diagram A. 1 so that AB is equal to CD, and perpendicular to the midpoint. To the point as the center C1, one-half of AB radius for the first round. Make a N-pointed star within the circle, as an auxiliary line only (Figure A.1). Figure A. 1 A. 2 A AC1 midpoint of a circle C2, half AC1 radius, as the second round (Figure A.2). Figure A. 2 A. 3 connection C2 and C, obtained intersection F, CF to the midpoint of a circle C3, one-half the radius CF, for the third round. Connection C2 And E, to obtain intersection G, the midpoint of a circle with GE C4, GE is one-half the radius, as fourth round (Figure A.3). Figure A. 3 A. 4 eliminate unnecessary arc to give the basic shape of an independent petals (Figure A.4). Figure A. 4 A. 5 is a circle C2, 0.35AC2 radius for the fifth round. C5 center equal to C2. In the J-point cross to make a vertical line connecting HI Get the point C6. In C6 point as the center, C6C2 radius for the sixth round (Figure A.5). Figure A. 5 A. 6 in the fifth round as a five-pointed star, and one corner toward the point C1. The sixth round to retain C7C5 arc, and out of the parallel copy Arc, spacing equal to one-sixtieth of AC1 (Figure A.6). Figure A. 6 A. 7 trimming double arc in the fifth round of the junction, and then canceled the fifth round (Figure A.7). Figure A. 7 A. 8 cancel the guides, get the last line single petals (Figure A.8). Figure A. 8 A. 9 C7 point as the center, the original petal Bauhinia C7P wiring length of the radius, as an auxiliary circle, and C7P wiring and a vertical line of 14 ° Angle (Figure A.9). Figure A. 9 A. 10 original Bauhinia flower petals placed in the auxiliary circle, make two C7P angle 14 ° (Figure A.10) corresponds to. Figure A. 10 A. 11 C7 point as the center of rotation petals four basic copy, get the full five-petal pattern (Figure A.11). Figure A. 11 A. 12 annular narrow width of one percent of the diameter of the regional emblem; the text area of the outer ring width is one-tenth the diameter of the regional emblem; Bauhinia outside Inscribed circle diameter of six tenths emblem diameter. Figure A. 12 A. 13 by the inner diameter of the upper end of the vertical symmetry of 220 ° for the distribution of the text area; according to the inner diameter of the lower end of the vertical symmetry of 80 ° for the distribution of English words Area; the text height of seven tenths of the width of the text area of the outer ring; the English word high is the text area of the outer ring width of six tenths; the text area of the outer ring Five-pointed star within a circumscribed circle diameter of the Bauhinia flower pentagram consistent circumcircle diameter. Figure A. 13 A. 14 Cancel all guides, finally obtained complete regional emblem (Figure A.14). Figure A. 14

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB 16690-2008_English be delivered?

Answer: Upon your order, we will start to translate GB 16690-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB 16690-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB 16690-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB 16690-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 16690-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.