HOME   Cart(12)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

GB/T 15632-2008 English PDF

US$299.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 15632-2008: General specification of wire holding tools for live working
Status: Valid

GB/T 15632: Evolution and historical versions

Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
GB/T 15632-2008English299 Add to Cart 3 days [Need to translate] General specification of wire holding tools for live working Valid GB/T 15632-2008
GB 15632-1995English359 Add to Cart 3 days [Need to translate] General specifications for live-line lifting device Obsolete GB 15632-1995

PDF similar to GB/T 15632-2008


Standard similar to GB/T 15632-2008

GB/T 33592   GB/T 31960.1   GB/T 12326   GB/T 45527   GB/T 28583   GB/T 18269   

Basic data

Standard ID GB/T 15632-2008 (GB/T15632-2008)
Description (Translated English) General specification of wire holding tools for live working
Sector / Industry National Standard (Recommended)
Classification of Chinese Standard F20
Classification of International Standard 13.260
Word Count Estimation 13,131
Date of Issue 2008-12-30
Date of Implementation 2010-02-01
Older Standard (superseded by this standard) GB 15632-1995
Quoted Standard GB/T 2900.55; GB/T 3077; GB/T 3191; GB/T 12361; GB 13398; GB/T 14286; GB/T 16927.1; GB/T 18037; DL/T 876; DL/T 878; DL/T 976; YB 3207; YB 3212
Regulation (derived from) Announcement of Newly Approved National Standards No. 25 of 2008 (total 138)
Issuing agency(ies) General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary This standard specifies the line tools for live working to mention the classification, technical requirements, test methods, inspection rules and signs, etc., This standard applies to 110kV ~ 750kV AC and DC �� 500kV line live replacement straight line insulator strings mentioning tools,

GB/T 15632-2008: General specification of wire holding tools for live working

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
General specification of wire holding tools for live working ICS 13.260 F20 National Standards of People's Republic of China Replacing GB 15632-1995 Line tools for live working mentioning General technical conditions Posted 2008-12-30 2010-02-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Category 1 5 2 Technical Requirements 6 Test Method 4 7 Inspection rules 6 8 signs, packaging 7 Appendix A (normative) glyph 8

Foreword

This standard replaces GB 15623-1995 "live working tools mentioned line General technical requirements." The standards are compared with GB 15623-1995 modify the following aspects. a) increase in product specifications Original standard specification mentioning line tool can only accommodate nominal cross ≤400mm2 wire, and with the development of China's power industry, large cut More extensive use of surface wires, so this revised standard adds LGJ-500, LGJ-630, LGJ-720 three large cross-section wire used The lift line specification tools. b) Applicable voltage range expanded Original standard specification mentioning line tool only applies to 110kV ~ 500kV voltage level, due to the ± 500kV DC and AC 750kV voltage levels appear that this revised standard adds DC ± 500kV and 750kV AC line voltage levels mentioned insulated tools Content and other components of electrical performance. Appendix A of this standard is a normative appendix. The standard proposed by China Electricity Council. This standard by the National Standardization Technical Committee for live working (SAC/TC36) centralized. This standard is mainly drafted by. State Grid Wuhan High Voltage Research Institute, Zhangzhou, Fujian Electric Power Company Electric Power Bureau. Drafters of this standard. Yi Hui, Sun Yiqun, Liusong Xi, Hu Yi, Zhang Lihua, Yu Zhengxing. This standard was first released in 1995, this is the first revision. Line tools for live working mentioning General technical conditions

1 Scope

This standard specifies the classification live working mentioning line tools, technical requirements, test methods, inspection rules and signs. This standard applies to 110kV ~ 750kV AC and DC ± 500kV Live Line replacement straight line insulator strings mention tools.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2900.55 Electrotechnical Terminology - Live Working (GB/T 2900.55-2002, eqv IEC 60050-651.1999) GB/T 3077 alloy steel GB/T 3191 aluminum and aluminum alloy extruded bars GB/T 12361 General technical conditions of steel die forgings GB 13398 live working hollow insulating tube, filled with an insulating foam insulation tubes and solid rods (GB 13398-2008, IEC 60885. 1985, MOD) GB/T 14286 live working tools and equipment term (GB/T 14286-2008, IEC 60743.2001, MOD) GB/T 16927.1 High-voltage test techniques Part 1. General test requirements (GB/T 16927.1-1997, eqv IEC 60060-1. 1989) GB/T 18037 live working tools Technical requirements and design guide DL/T 876 live working with insulating Guide DL/T 878 live working insulated tools Test Guidelines Preventive test code DL/T 976 live working tools, devices and equipment YB3207 forgings - General technical requirements YB3212 heat treatment member General technical conditions

3 Terms and Definitions

GB/T 2900.55 and GB/T 14286 and determined the following terms and definitions apply to this standard. 3.1 Insulator strings used to replace linear mechanical loads and electrical wire insulation strength to withstand carried Lifting wire work tool. Its two End has a metal rack, and a length adjustment mechanism, the middle insulating member. 3.2 When upgrading the overhead power line (or relaxation) wiring work, lifting line tool can adjust the length of the device connection. Generally thread Structure. Category 4 Tools can be divided into four categories mentioned wire insulation member according to the type of insulating material, were selected pipe insulation, insulation rod, insulation sheet and must These four rope edge material, with the ends of the metal rack with the respective connection should use an insulating material adapted to shape the way.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 15632-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 15632-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 15632-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 15632-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 15632-2008?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 15632-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.