|
US$199.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB 11654.1-2012: [GB/T 11654.1-2012] Health protection zone for paper and paper products industry -- Part 1: Pulp and paper industry
Status: Obsolete GB 11654.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| GB 11654.1-2012 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
[GB/T 11654.1-2012] Health protection zone for paper and paper products industry -- Part 1: Pulp and paper industry
| Obsolete |
GB 11654.1-2012
|
| GB 11654-1989 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Health protection zone standard for vitriol paper mill
| Obsolete |
GB 11654-1989
|
PDF similar to GB 11654.1-2012
Basic data | Standard ID | GB 11654.1-2012 (GB11654.1-2012) | | Description (Translated English) | [GB/T 11654.1-2012] Health protection zone for paper and paper products industry -- Part 1: Pulp and paper industry | | Sector / Industry | National Standard | | Classification of Chinese Standard | C51 | | Classification of International Standard | 13.100 | | Word Count Estimation | 5,577 | | Older Standard (superseded by this standard) | GB 11654-1989 | | Quoted Standard | GB/T 3840-1991 | | Regulation (derived from) | National Standards Bulletin No. 31 of 2012 | | Issuing agency(ies) | General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China | | Summary | This Chinese standard applies to Kraft pulp manufacturing enterprises and sensitive health protection distance required between the areas. This standard applies is located in the plains of Kraft pulp manufacturing enterprises new construction, renovation, | GB 11654.1-2012: [GB/T 11654.1-2012] Health protection zone for paper and paper products industry -- Part 1: Pulp and paper industry
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Health protection zone for paper and paper products industry.Part 1. Pulp and paper industry
ICS 13.100
C51
National Standards of People's Republic of China
Replacing GB 11654-1989
Paper and paper products industry Health protection
Part 1. Pulp Manufacturing
Part 1. Pulpandpaperindustry
Issued on. 2012-11-20
2013-05-01 implementation
People's Republic of China Ministry of Health
Standardization Administration of China released
Foreword
This section 4.2 to 4.4 are recommended, the rest are mandatory.
GB 11654 "Paper and paper products industry Health protection" is divided into two parts.
--- Part 1. Pulp manufacturing;
--- Part 2. paper.
This section GB Part of 111,654.
This section drafted in accordance with GB/T 1.1-2009 given rules.
This Part replaces GB 11654-1989 "Health protection zone standard kraft paper mill", compared with GB 11654-1989 main technical
Surgery changes are as follows.
--- Adjust the standard name, and according to GB/T 1.1-2009 standard structure adjustment;
--- Amendments to the definition of health protection distance, increasing the sensitive area of complex terrain two terms and definitions;
--- Revised the Health protection zone standard limits, increasing the scale of production sub-file;
--- Increased requirements for greening.
This part of the People's Republic of China Ministry of Health and focal points.
This in part by the Chinese Center for Disease Control Environmental Health and Related Product Safety, Shandong Province Disease Prevention and Control Center is responsible for drafting.
The main drafters of this section. Jin Yinlong, Suishao Feng, Hongyan Feng, Fan Ling, Zhang Wei, Zouli Hai, Yang Wenjing, Wang You-fa, Li Baoying,
Zhou Huasheng, Yellow Sea, Du Yinglin, Jiang Yuanyuan, Yan Xu.
Paper and paper products industry Health protection
Part 1. Pulp Manufacturing
1 Scope
GB 11654 of the provisions of this part of the health protection distance required between kraft pulp manufacturing enterprises and sensitive areas.
This section applies to areas located in the plains of sulphate pulp manufacturers new construction, renovation, expansion project. Existing kraft pulp manufacturing
Enterprises may refer.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3840-1991 development of local air pollutant emission standards of technical methods
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1
Health protection healthprotectionzone
Factors adversely department (workshop or workplace) to the sensitive border zone boundary minimum distance.
3.2
Sensitive area sensitivearea
Residential areas, schools, hospitals and other air pollution sensitive areas.
3.3
Complex terrain complicatedlandform
Mountains, hills, coastal.
4 index requirements
4.1 Pulp Manufacturing Health protection zone standard limits are shown in Table 1.
Table 1 pulp manufacturing Health protection standard limits
Production scale
Million t/a
Region the past five years the average wind speed
m/s
Health protection
< 30
< 2800
2 ~ 4600
> 4500
≥30
< 2900
2 ~ 4800
> 4600
4.2 Determination of pulp manufacturing company located in Health Protection in complex terrain conditions, in the light of GB/T 3840-1991 7.6
Regulations.
4.3 Location pulp manufacturing enterprises and sensitive areas, should consider the impact of factors such as wind direction and topography frequency to minimize its sensitive areas atmosphere
Pollution of the environment.
Enterprise 4.4 within the health protection distance range, densely planted trees plants green belt (width less than 10m), and according to health
90% protection from the standard limit of execution. Attention to the selection of species resistant characteristics of pollutants or adsorption characteristics.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB 11654.1-2012_English be delivered?Answer: Upon your order, we will start to translate GB 11654.1-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of GB 11654.1-2012_English with my colleagues?Answer: Yes. The purchased PDF of GB 11654.1-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version GB 11654.1-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB 11654.1-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|