|
US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 95012-2019: Single layer heat-setting stenter
Status: Valid FZ/T 95012: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 95012-2019 | English | 139 |
Add to Cart
|
3 days [Need to translate]
|
Single layer heat-setting stenter
| Valid |
FZ/T 95012-2019
|
| FZ/T 95012-2010 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Single laryer heat-setting stenter
| Obsolete |
FZ/T 95012-2010
|
| FZ/T 95012-1999 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Sing lelaryer heat-setting stenter
| Obsolete |
FZ/T 95012-1999
|
PDF similar to FZ/T 95012-2019
Basic data | Standard ID | FZ/T 95012-2019 (FZ/T95012-2019) | | Description (Translated English) | Single layer heat-setting stenter | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W95 | | Classification of International Standard | 59.120.50 | | Word Count Estimation | 6,636 | | Date of Issue | 2019 | | Date of Implementation | 2020-07-01 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the type and parameters, requirements, test methods, inspection rules, marking, packaging, transportation and storage of single-layer tenter-setting machines. This standard applies to setting machines and tenter frames for cotton, wool, chemical fiber, blended fabrics and non-woven fabrics. | FZ/T 95012-2019: Single layer heat-setting stenter---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Single layer heat-setting stenter
ICS 59.120.50
W95
People's Republic of China Textile Industry Standard
Replace FZ/T 95012-2010
Single-layer stenter setting machine
Published on December 24,.2019
2020-07-01 implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard replaces FZ/T 95012-2010 "Single-layer Tenter Setting Machine", and the main technical changes compared with FZ/T 95012-2010
as follows.
--- Modified the scope (see Chapter 1, Chapter 1 of the.2010 edition);
--- Modified the type and parameters (see Table 1,.2010 version of Table 1);
--- Modify the temperature difference between left, center and right in the drying room (see 4.4, 4.3 in.2010 edition);
--- Modify the temperature difference between the outer surface of the insulation board of the drying room and the working environment (see 4.7, 4.6 in the.2010 version);
--- Modify the safety configuration of the heat source when using gas (see 4.11, 4.12 in.2010 version);
--- Increased the requirements of the guide rail (see 4.12);
--- Added the requirement for safety protection measures and warnings for the whole machine (see 4.15);
--- Added test requirements for guide rails (see 5.1.9);
--- Added the test requirements for the vibration displacement of the guide rail (see 5.1.10);
--- Added test method for radiator (see 5.1.11,.2010 edition 1).
This standard was proposed by the China National Textile and Apparel Council.
This standard is provided by the Technical Committee of the National Textile Machinery and Accessories Standardization Technical Committee for Spinning, Dyeing and Finishing Machinery (SAC/TC215/SC1)
Be in charge.
This standard was drafted by. Jiangsu Haida Textile Machinery Co., Ltd., National Textile Machinery Quality Supervision and Inspection Center, Guangdong Sanke
Lands Machinery Technology Co., Ltd., Yuanxin Industrial Co., Ltd., Fujian Jilong Machinery Technology Co., Ltd., Zhejiang Licheng Printing and Dyeing Machinery
Technology Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Haining Textile Machinery Co., Ltd., Changshu Wanlong Machinery Co., Ltd., Jiangsu Xiaotai
Yang Machinery Technology Co., Ltd.
The main drafters of this standard. Chen Lijie, Li Liping, Chen Hongjun, Chen Shaojun, Chen Progress, Chen Tingfa, Tang Jielian, Shen Jiahai, Fan Zhen,
Zhang Ruinan.
The previous versions of the standard replaced by this standard are as follows.
--- FJ/JQ246-1990;
--- FZ/T 95012-1999, FZ/T 95012-2010.
Single-layer stenter setting machine
1 Scope
This standard specifies the type and parameters, requirements, test methods, inspection rules, signs, packaging, transportation, and storage of single-layer stentering machines.
This standard applies to setting machines and tenter frames for cotton, wool, chemical fibers, blended fabrics, and nonwoven fabrics.
2 Normative references
The following documents are essential for the application of this document. For dated references, only the dated version applies to this article
Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document.
GB/T 191 Graphic mark for packaging, storage and transportation
GB 2894 safety signs and guidelines for their use
GB 5226.1-2008 Mechanical Electrical Safety Mechanical Electrical Equipment Part 1. General Technical Conditions
GB/T 7111.7 Noise Test Specification for Textile Machinery Part 7. Dyeing and Finishing Machinery
GB/T 17780.7 Safety requirements for textile machinery Part 7. Dyeing and finishing machinery
FZ/T 90001 Textile machinery product packaging
FZ/T 90074 Textile machinery product coating
FZ/T 90089.1 Type, size and technical requirements of the nameplate of textile machinery
FZ/T 90089.2 Textile machinery nameplate content
FZ/T 92012 Cloth chain
FZ/T 92039 cloth clip
FZ/T 95021 heat setting machine guide
3 Types and parameters
Type and parameters are shown in Table 1.
Table 1
Main parameters of the project
Suitable for non-woven fabrics of cotton, wool, chemical fiber, blended fabrics
Machine type hot air circulation
Tenter chain arrangement single-layer horizontal, single-layer vertical
Nominal width/mm 1400, 1600, 1800,.2000, 2200, 2400, 2600, 2800, 3000, 3200, 3400, 3600
Nominal speed/(m/min) 50, 60, 80, 100, 120 10, 15, 30
Hot air temperature/℃ 100 ~ 220 80 ~ 260
Heat source heat conduction oil, gas (city gas, natural gas, water gas, liquefied petroleum gas), electricity, steam, hot air
Note. Special order is required when the hot air temperature is 260 ℃.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 95012-2019_English be delivered?Answer: Upon your order, we will start to translate FZ/T 95012-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 95012-2019_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 95012-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 95012-2019?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 95012-2019 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|