|
US$279.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93067-2010: Tape for the ring spinning frame
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 93067-2010 | English | 279 |
Add to Cart
|
3 days [Need to translate]
|
Tape for the ring spinning frame
| Valid |
FZ/T 93067-2010
|
PDF similar to FZ/T 93067-2010
Basic data | Standard ID | FZ/T 93067-2010 (FZ/T93067-2010) | | Description (Translated English) | Tape for the ring spinning frame | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W93 | | Classification of International Standard | 59.120.10 | | Word Count Estimation | 12,188 | | Date of Issue | 2010-08-16 | | Date of Implementation | 2010-12-01 | | Quoted Standard | GB/T 191; GB/T 532; GB/T 2828.1; GB/T 2829; GB/T 2941-2006; HG/T 2729-1995 | | Regulation (derived from) | Engineering (2010) No. 115 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the ring spinning spindle tape with classification and marking, requirements, test methods, inspection rules, packaging, marking and storage. This standard applies to cotton, wool, hemp, chemical fiber and blended by the rolling ring spinning disk drive spindles, spindle tapes, also applies to the use of other textile spindles with mechanical transmission. This standard does not apply to pure fabrics Tapes. | FZ/T 93067-2010: Tape for the ring spinning frame---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Tape for the ring spinning frame
ICS 59.120.10
W93
People's Republic of China textile industry standards
Ring spinning frame with Tapes
Issued on. 2010-08-16
2010-12-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
The Standard Annexes A and B are normative appendix.
The standard proposed by China Textile Industry Association.
This standard by the National Standardization Technical Committee Textile machinery and accessories.
This standard was drafted. Jinan Tianqi special flat belt Co., Shaanxi Institute of textile equipment.
The main drafters of this standard. Li Qiu Feng, Zou Aihua, Jiaodong Ying, Zhao Yusheng.
Ring spinning frame with Tapes
1 Scope
This standard specifies the ring spinning spindle tape with classification and marking, requirements, test methods, inspection rules, packaging, labeling and storage.
This standard applies to cotton, wool, linen, chemical fiber and blended by a ring spinning roulette drive spindle with spindle belt, is also applicable to other textile machinery transmission
Use Tapes.
This standard does not apply to pure fabric Tapes.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 191 Packaging - Pictorial signs
Determination of GB/T 532 vulcanized rubber or thermoplastic rubber and fabric adhesive strength
GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan
GB/T 2829 periodic inspection Sampling procedures and tables (suitable for process stability test)
GB/T 2941-2006 rubber physical test method for preparing and conditioning General Procedure
Determination of HG/T 2729-1995 vulcanized rubber sheet coefficient of sliding friction law
3 Classification and Marking
3.1 Classification
3.1.1 Tapes by the skeleton layer and an elastomer layer, skeleton layer is divided into layers of fabric and polymer matrix reinforced sheet skeleton layer; spindle belt structure
Materials and code in Figure 1, Table 1.
Two skeleton Tapes c) three skeleton spindles with a) single skeleton Tapes b)
B --- ingot width;
H --- Tapes thickness;
h --- reinforced skeleton layer thickness;
L --- endless Tapes inner perimeter or roll spindles with length.
Figure 1 Structure type band and basic dimensions
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93067-2010_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93067-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 93067-2010_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93067-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|