|
US$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 90060.8-2005: Textile machinery. Product drawing and design document. Part 8: Examination of standardization
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 90060.8-2005 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Textile machinery. Product drawing and design document. Part 8: Examination of standardization
| Valid |
FZ/T 90060.8-2005
|
PDF similar to FZ/T 90060.8-2005
Basic data | Standard ID | FZ/T 90060.8-2005 (FZ/T90060.8-2005) | | Description (Translated English) | Textile machinery. Product drawing and design document. Part 8: Examination of standardization | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120 | | Word Count Estimation | 8,869 | | Date of Issue | 2005-05-18 | | Date of Implementation | 2006-01-01 | | Quoted Standard | GB/T 14665; FZ/T 90060.1; FZ/T 90060.3; FZ/T 90060.4; FZ/T 90060.5; GB/T 17825.1; GB/T 17825.2; GB/T 17825.3; GB/T 17825.4; GB/T 17825.5; GB/T 17825.6; GB/T 17825.7; GB/T 17825.8; GB/T 17825.9; GB/T 17825.10 | | Regulation (derived from) | NDRC Notice No. 24 of 2005 | | Issuing agency(ies) | National Development and Reform Commission, People Republic of China | | Summary | This standard specifies the textile machinery product design and design review of the contents of the standardization of documents and requirements. This section applies to the textile machinery industry, product design and standardization of design documents for review. Other product drawings and technical documents can also refer to a standardized examination performed. | FZ/T 90060.8-2005: Textile machinery. Product drawing and design document. Part 8: Examination of standardization
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery.Product drawing and design document.Part 8. Examination of standardization
ICS 59.120
W90
People's Republic of China Textile Industry Standard
Textile machinery product drawings and design documents
Part 8. Standardization review
Released on.2005-05-18
2006-01-01 implementation
National Development and Reform Commission of the People's Republic of China
Foreword
FZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents".
--- Part 1. General;
--- Part 2. Numbering;
--- Part 3. Requirements for drawings;
--- Part 4. Requirements for design documents;
--- Part 5. Format;
--- Part 6. Integrity;
--- Part 7. Change;
--- Part 8. Standardization review;
--- Part 9. Management.
This part is part 8 of the FZ/T 90060.
This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise management assurance system and product market competition.
According to the relevant national standards and industry standards, fully consider the characteristics of the textile machinery industry, refer to JB/T 5054.7-2000 "mechanical product map
Revised on the basis of the Standardization Review of Samples and Design Documents.
This section is a new addition.
Appendix A of this section is an informative annex.
This part was proposed by the China Textile Industry Association.
This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee.
This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei
Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd.
The main drafters of this section. Huang Hongkang, Yan Guohong, Lin Jian, Shen Yingquan, Zhao Guanhong, Xu Jinglu.
Textile machinery product drawings and design documents
Part 8. Standardization review
1 Scope
This part of FZ/T 90060 specifies the content and requirements for the standardization review of textile machinery product drawings and design documents.
This section applies to the standardization review of product drawings and design documents in the textile machinery industry. Standards for other product drawings and technical documents
The review can also refer to implementation.
2 Normative references
The provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 14665 Mechanical Engineering CAD Drawing Rules
GB/T 17825 (all parts) CAD file management
FZ/T 90060.1 Textile machinery product drawings and design documents - Part 1. General
FZ/T 90060.3 Textile machinery product drawings and design documents - Part 3
FZ/T 90060.4 Textile machinery product drawings and design documents - Part 4. Requirements for design documents
FZ/T 90060.5 Textile machinery product drawings and design documents - Part 5. Format
3 Terms and definitions
The terms and definitions established by FZ/T 90060.1 apply to this part of FZ/T 90060.
4 basic requirements
4.1 The basis for standardization review is related to technical regulations and standards at all levels. After standardization review, it should be achieved.
a) The designed product complies with relevant national technical regulations;
b) The designed products meet the requirements of national standards, industry standards and enterprise standards;
c) Prioritize the use of stereotyped design and structural solutions, and maximize the use of standard parts, general parts, borrowed parts to improve design
Inheritance and standardization of products;
d) rational selection of basic standards and raw material standards such as priority numbers and structural elements of parts;
e) Product drawings and design documents comply with relevant standards and are correct, complete, clear and uniform.
4.2 Outsourcing or self-developed CAD software should be standardized for review, check whether it meets national standards and other according to GB/T 17825
Standard regulations.
4.3 Standardization review is based on the premise that design and proofreaders consciously implement various standards, in product development decision, preliminary design, and technology.
All stages of design and construction design are carried out.
5 Scope and content of the standardization review
5.1 Scope of standardization review
Product designs and design documents for new designs, rectifications and improvements must be standardized for review.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 90060.8-2005_English be delivered?Answer: Upon your order, we will start to translate FZ/T 90060.8-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 90060.8-2005_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 90060.8-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|