|
US$219.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 90060.7-2005: Textile machinery. Product drawing and design document. Part 7: Amendment
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 90060.7-2005 | English | 219 |
Add to Cart
|
3 days [Need to translate]
|
Textile machinery. Product drawing and design document. Part 7: Amendment
| Valid |
FZ/T 90060.7-2005
|
PDF similar to FZ/T 90060.7-2005
Basic data | Standard ID | FZ/T 90060.7-2005 (FZ/T90060.7-2005) | | Description (Translated English) | Textile machinery. Product drawing and design document. Part 7: Amendment | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120 | | Word Count Estimation | 8,859 | | Date of Issue | 2005-05-18 | | Date of Implementation | 2006-01-01 | | Older Standard (superseded by this standard) | FZ/T 90066-1995 | | Quoted Standard | FZ/T 90060.4-2005 | | Regulation (derived from) | NDRC Notice No. 24 of 2005 | | Issuing agency(ies) | National Development and Reform Commission, People Republic of China | | Summary | This standard specifies the product design and design documents to change classification, change conditions, change the rules and methods, change the program, the general change management and control. This section applies to the production of textile machinery industry, product design and design changes to files and annotation method. Other product design and design changes to a file can also be implemented by reference. | FZ/T 90060.7-2005: Textile machinery. Product drawing and design document. Part 7: Amendment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery.Product drawing and design document.Part 7. Amendment
ICS 59.120
W90
People's Republic of China Textile Industry Standard
Replace FZ/T 90066-1995
Textile machinery product drawings and design documents
Part 7. Change
Released on.2005-05-18
2006-01-01 implementation
National Development and Reform Commission of the People's Republic of China
Foreword
FZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents".
--- Part 1. General;
--- Part 2. Numbering;
--- Part 3. Requirements for drawings;
--- Part 4. Requirements for design documents;
--- Part 5. Format;
--- Part 6. Integrity;
--- Part 7. Change;
--- Part 8. Standardization review;
--- Part 9. Management.
This part is part 7 of the FZ/T 90060.
This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise quality management system and product market competition.
According to the relevant national standards and industry standards, fully consider the characteristics of the textile machinery industry, in the original FZ/T 90066-1995 "Textile Machinery
The revision of the product drawings and design documents is based on the JB/T 5054.6-2000 "Product drawings and design".
The contents of the Document Change Method.
This part replaces FZ/T 90066-1995 "Changes in textile machinery product drawings and design documents". Main difference from the original standard
as follows.
---The standard name was changed from "change of textile machinery product pattern and design document" to "textile machinery product pattern and design file"
Part 7. Change";
--- Added "major changes" and their requirements;
--- Added "Management and Control of General Changes".
Appendix A of this section is an informative annex.
This part was proposed by the China Textile Industry Association.
This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee.
This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei
Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd.
The main drafters of this section. Huang Hongkang, Yan Guohong, Lin Jian, Shen Yingquan, Zhao Guanhong, Xu Jinglu.
Textile machinery product drawings and design documents
Part 7. Change
1 Scope
This part of FZ/T 90060 specifies the classification of the product drawings and design files, the conditions for changes, the rules and methods of change, and the changes.
Order, management and control of general changes, etc.
This section applies to the modification and labeling of product drawings and design documents produced by the textile machinery industry. Other product drawings and designs
Changes to the file can also be referred to for execution.
2 Normative references
The provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
FZ/T 90060.4-2005 Textile machinery product drawings and design documents - Part 4. Requirements for design documents
3 General
3.1 In order to ensure that the product can meet the requirements of users, and to ensure the advanced level of the product and the correctness of the design documents of the drawings, it should be developed along with the production and
Make reasonable changes to the drawings and design files.
3.2 The changed drawings and design documents shall not reduce the quality of the products. If necessary, test records, investigation reports, inspection results, etc. shall be attached.
Technical information explaining the reason for the change.
3.3 When changing drawings and design files, relevant documents and CAD files of different media of the same code should be changed accordingly to ensure
Coordination of relevant documents.
4 Changed classifications and conditions
4.1 Changes may be categorized as follows.
a) General changes. Refers to the structure of certain parts and joints in order to meet the requirements of manufacturing and use in production.
Changes made in shape, size, etc.;
b) Significant changes. Means that after the product is officially produced, in order to meet the special requirements of the user, or to use the new structure locally,
New developments, new methods, and design development changes to products or components.
4.2 Any change to the following conditions shall be made.
a) the drawings, tables, design documents are incorrect or the expression is inaccurate;
b) According to the test and trial results, the product quality can be improved after the change;
c) Under the premise of ensuring product quality, according to economic analysis and test, trial results, the manufacturing process can improve the manufacturing process and reduce
Low production cost;
d) It has been confirmed by the investigation that the user's change proposal has improved the performance of the product;
e) the implementation of relevant standards (including amendments to new standards and standards) must be changed;
f) Change according to user needs.
|