|
US$319.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 90060.1-2005: Textile machinery. Product drawing and design document. Part 1: General principles
Status: Valid FZ/T 90060.1: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 90060.1-2005 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Textile machinery. Product drawing and design document. Part 1: General principles
| Valid |
FZ/T 90060.1-2005
|
| FZ/T 90060-1995 | English | 319 |
Add to Cart
|
3 days [Need to translate]
|
Textile Machinery - Product Drawings and Design Documents - Terms
| Obsolete |
FZ/T 90060-1995
|
PDF similar to FZ/T 90060.1-2005
Basic data | Standard ID | FZ/T 90060.1-2005 (FZ/T90060.1-2005) | | Description (Translated English) | Textile machinery. Product drawing and design document. Part 1: General principles | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W90 | | Classification of International Standard | 59.120 | | Word Count Estimation | 12,171 | | Date of Issue | 2005-05-18 | | Date of Implementation | 2006-01-01 | | Older Standard (superseded by this standard) | FZ/T 90060-1995 | | Quoted Standard | GB/T 1.2; GB/T 17825.7; FZ/T 90060.8; FZ/T 90060.9 | | Regulation (derived from) | NDRC Notice No. 24 of 2005 | | Issuing agency(ies) | National Development and Reform Commission, People Republic of China | | Summary | This standard specifies the textile machinery drawings and design documents, including CAD drawings and design documents (hereinafter referred to as CAD files) related definitions of terms, classification and signature rules. This section applies to the textile machinery industry, product design and design file management. Other product drawing and design file management can be implemented by reference. | FZ/T 90060.1-2005: Textile machinery. Product drawing and design document. Part 1: General principles
---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Textile machinery.Product drawing and design document.Part 1. General principles
ICS 59.120
W90
People's Republic of China Textile Industry Standard
Replace FZ/T 90060-1995
Textile machinery
Product drawings and design files
Part 1. General
Released on.2005-05-18
2006-01-01 implementation
National Development and Reform Commission of the People's Republic of China
Foreword
FZ/T 90060 includes the following nine parts under the general title of "Textile Machinery Product Drawings and Design Documents".
--- Part 1. General;
--- Part 2. Numbering;
--- Part 3. Requirements for drawings;
--- Part 4. Requirements for design documents;
--- Part 5. Format;
--- Part 6. Integrity;
--- Part 7. Change;
--- Part 8. Standardization review;
--- Part 9. Management.
This part is the first part of the FZ/T 90060.
This part is based on the needs of enterprises to implement computer-aided design (CAD) and enterprise quality management system and product market competition.
According to the relevant national standards and industry standards, fully take into account the characteristics of the textile machinery industry, in the original FZ/T 90060-1995 "Textile Machinery
Revised on the basis of product drawings and design document terms.
This part replaces FZ/T 90060-1995 "Textile machinery product drawings and design document terminology", the main differences with the original standard are as follows.
---The standard name was changed from "Textile Machinery Product Drawing and Design Document Terminology" to "Textile Machinery Product Drawing and Design Document"
Part 1. General);
--- Standard content supplements the "structure, classification of CAD files", "signing rules", etc.;
--- Added the definition of some design documents, the number of entries in the standard increased from 58 to 78, the name of the individual,
The content has been appropriately adjusted;
--- Cancel the original standard "sub-base map" entry.
This part was proposed by the China Textile Industry Association.
This part is under the jurisdiction of the National Textile Machinery and Accessories Standardization Technical Committee.
This section is mainly drafted by. China Textile Machinery Research Institute, Zhengzhou Textile Machinery Co., Ltd., Shaoyang Textile Machinery Co., Ltd., Jingwei
Textile Machinery Co., Ltd., China Textile Machinery (Group) Co., Ltd., Best Machinery Manufacturing Co., Ltd.
The main drafters of this section. Huang Hongkang, Yan Guohong, Lin Jian, Shen Yingquan, Zhao Guanhong, Xu Jinglu.
Textile machinery
Product drawings and design files
Part 1. General
1 Scope
This part of FZ/T 90060 specifies the textile machinery product drawings and design documents, including CAD drawings and design documents (hereinafter referred to as
CAD files) definitions, classifications, and signing rules for related terms.
This section applies to the management of product drawings and design documents in the textile machinery industry. Other product drawings and design documents can also be managed.
Photo execution.
2 Normative references
The provisions in the following documents become the provisions of this part by reference to this part of FZ/T 90060. Quotations with dated
, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouragement is achieved under this section
The parties to the agreement study whether the latest versions of these documents can be used. For undated references, the latest edition applies to this
section.
GB/T 1.2 Standardization Work Guide Part 2. Method for determining the content of normative technical elements in standards
GB/T 17825.7 CAD file management signing rules
FZ/T 90060.8 Textile machinery product drawings and design documents - Part 8. Standardization review
FZ/T 90060.9 Textile machinery product drawings and design documents - Part 9. Management
3 Terms and definitions
The following terms and definitions apply to this part of FZ/T 90060.
3.1 Products and their components
3.1.1
A combination of finished or manufactured goods provided by a manufacturing enterprise to a user or market in the form of a commodity.
3.1.2
A part consisting of several parts and some parts that are not drawn into the part (called a direct part) and a joint (called a straight-through joint).
3.1.3
A part consisting of several parts or consisting of several parts and joints.
3.1.4
A part consisting of several parts in a non-removable form (such as welding, riveting, pouring, etc.). Also included in the joint parts if necessary
Smaller joints, in the case of a set or a set of parts, can also be made up of smaller parts of several parts in a detachable form.
3.1.5
A single finished product that has a manufacturing process without an assembly process is the basic unit that makes up the product.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 90060.1-2005_English be delivered?Answer: Upon your order, we will start to translate FZ/T 90060.1-2005_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 90060.1-2005_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 90060.1-2005_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 90060.1-2005?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 90060.1-2005 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|