HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

FZ/T 64040-2014 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 64040-2014: Quilted adhesive-bonded nonwoven interlinings
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
FZ/T 64040-2014English189 Add to Cart 3 days [Need to translate] Quilted adhesive-bonded nonwoven interlinings Valid FZ/T 64040-2014

PDF similar to FZ/T 64040-2014


Standard similar to FZ/T 64040-2014

GB/T 6097   FZ/T 12018   FZ/T 10007   FZ/T 64041   FZ/T 64039   FZ/T 64048   

Basic data

Standard ID FZ/T 64040-2014 (FZ/T64040-2014)
Description (Translated English) Quilted adhesive-bonded nonwoven interlinings
Sector / Industry Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard W13
Classification of International Standard 59.080.99
Word Count Estimation 8,897
Date of Issue 5/6/2014
Date of Implementation 10/1/2014
Quoted Standard GB/T 250; GB/T 4666; GB/T 5709; GB/T 6529; GB/T 8170; GB/T 8629-2001; GB 18401; GB/T 24218.1; GB/T 24218.3; GB/T 28465; FZ/T 01074; FZ/T 01075; FZ/T 01076; FZ/T 01081; FZ/T 01082; FZ/T 01083; FZ/T 01084; FZ/T 01085; FZ/T 01110; FZ/T 60034
Regulation (derived from) ?MIIT Announcement 2014 No. 32; Industry-Standard-Filing Announcement 2014 No. 6 (Total No. 174)
Issuing agency(ies) Ministry of Industry and Information Technology of the People's Republic of China
Summary This Standard specifies the stitch non-woven interlining terms and definitions, product classification, technical requirements, test methods, inspection rules, marking and packaging. This Standard applies to the identification of clothing with stitching q

FZ/T 64040-2014: Quilted adhesive-bonded nonwoven interlinings

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Quilted adhesive-bonded nonwoven interlinings ICS 59.080.99 W13 People's Republic of China textile industry standards Stitch non-woven interlining Issued on. 2014-05-06 2014-10-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. The standard proposed by China Textile Industry Association. This standard by the National Technical Committee of Standardization Technical Committee printing and dyeing cotton textiles (SAC/TC209/SC2) centralized. This standard was drafted. Weibaisite lining (Nantong) Co., Ltd., Hubei Jingzhou City Hongfeng lining Ltd., Shia Figure (Shanghai) Nonwoven Co., Ltd., Nantong Jianghuai lining Limited Shanghai textile industry technical supervision, China Textiles Industry Association, the Mirage and Apparel Institute. Drafters of this standard. Shen Rong, Yu Gu Ju, Xie Yongbo, Ma Jianjun, Liu, Zhang Baoqing, LI Gui-mei, Yu Kangwei, Shi Qin. Stitch non-woven interlining

1 Scope

This standard specifies the terms and definitions stitch non-woven interlining, product classification, technical requirements, test methods, inspection rules, signs and package. This standard applies to identify clothing stitching quality of non-woven interlining.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 250 textile color fastness test assessing change in color like the gray card Determination of GB/T 4666 Textiles length and width of GB/T 5709 Textiles Nonwovens term GB/T 6529 Textiles Standard conditioning and testing atmosphere GB/T 8170 repair value expressed about the rules and limit values and judgment GB/T 8629-2001 Textiles - Domestic washing and drying test procedures GB 18401 National Safety Technical Code for Textile Products Determination of mass per unit area. GB/T 24218.1 Textiles nonwovens Test methods - Part 1 GB/T 24218.3 Nonwoven Textiles - Test methods - Part 3. breaking strength and elongation measurement (strip method) GB/T 28465 clothing lining inspection rules FZ/T 01074 clothing lining product identification FZ/T 01075 clothing lining appearance defect inspection method FZ/T 01076 heat-fusible interlining combination of size change of the sample preparation method FZ/T 01081 and the amount of heat-fusible interlining hot melt coating method for coating uniformity test FZ/T 01082 Fusible Interlinings heat dimensional change of test methods Appearance and dimensional change test methods FZ/T 01083 heat-fusible interlining after dry cleaning FZ/T 01084 heat-fusible interlining after washing appearance and dimensional change test method FZ/T 01085 heat-fusible interlining peel strength test method Gel permeation test method FZ/T 01110 Pressing after bonding interlining FZ/T 60034 Test Method interlining dusting

3 Terms and Definitions

GB/T 5709 and defined the following terms and definitions apply to this document. 3.1 With polyester drawn yarn, the stitching process on the non-woven fabric shaped longitudinal reinforcement interlining.

4 Products

4.1 stitch non-woven fabric interlining press materials can be divided into polyester, nylon, Jindi stitch non-woven interlining. 4.2 stitch non-woven interlining according to the stitching pitch, it can be divided into 18-pin/25mm, 14-pin/25mm, 9-pin/25mm, 7-pin/25mm seam Non-woven interlining series.

5 Technical requirements

5.1 grading regulations Products 5.1.1 Product divided into superior products, first-class products, qualified, qualified product is lower than the defective product. Comment 5.1.2 products divided into physical and chemical properties and appearance both. Physical and chemical properties include basis weight variation rate, peel strength Force, washing dimensional change rate, the rate of heat dimensional change of the sample composition, longitudinal breaking strength, elongation at break lengthwise, stitch polyester drawn yarn dry heat Changes in appearance, the coating amount of deviation rate, change the appearance of the sample after washing combinations, sample hot melt adhesive glue seepage, safety performance. Including the appearance quality cloth Surface defects (localized defects, defects and disseminated stitching requirements), allows each roll segment length and number of segments. 5.1.3 stitch non-woven interlining and other physical and chemical properties of press criticism, visual quality rating by volume, according to a comprehensive rating among the lowest rating. 5.1.4 in the same volume liner, sometimes two or more while reducing the physical and chemical properties and the like, with a minimum rating; there are two or more quality appearance and asked When problems exist, according to a severe rating. 5.1.5 liner in the same volume, while there is localized and disseminated defects, press defects Locality rating, combined with the spread of the defect Progressively downgraded as the volume interlining appearance quality grade. 5.2 Physical and Chemical Properties 5.2.1 The safety of products should meet the requirements of GB 18401. 5.2.2 The physical and chemical properties of the product classification provisions in Table 1. Table 1 Physical and chemical properties classification regulations Project Excellence in goods First grade Qualified Mass per unit area Deviation Rate /% according to design requirements -5.0 to 5.0 -7.0 7.0 -8.0 8.0 Peel strength/N Before washing or dry cleaning ≥10.0 ≥8.0 ≥6.0 After washing or dry cleaning ≥8.0 ≥6.0 ≥4.0 Washing dimensional change rate /% Portrait Polyester ≥-1.0 ≥-1.3 ≥-2.0 Polyester, nylon ≥-1.5 ≥-2.0 ≥-2.0 Lateral polyester, Polyester, nylon ≥-0.8 ≥-1.0 ≥-1.5 A combination of sample Heat dimensional change rate /% Portrait ≥-1.3 ≥-1.5 ≥-2.0 Transverse ≥-0.8 ≥-1.0 ≥-1.5 Longitudinal fracture strength/N ≥90.0 ≥90.0 ≥90.0 Longitudinal elongation at break /% ≥10.0 ≥10.0 ≥10.0 Stitching polyester drawn yarn dry heat change in appearance Stitching thread and fabric close Shrink consistent pressure after hot table Planing Stitching thread and fabric close Shrink consistent pressure after hot table Planing Coating amount of deviation rate /% -10.0 -12.0 -12.0 -15.0 to 10.0 to 15.0 After washing the sample composition changes in appearance/grade ≥4 ≥4 ≥3 Hot melt adhesive composition sample strike-front strike-strike-positive are not allowed not allowed not allowed to strike-positive Note 1. In addition to dry cleaning resistant lining, the peel strength was measured after washing. Note 2. interlining peel strength tests, such as interlining cloth broken, peeling strength is considered qualified. 5.3 appearance quality 5.3.1 disseminated defect adopt a different degree of defects downgraded stepwise approach. With a clear distinction between 5.3.2 slight defects, according to GB/T 250 in a single layer inspection and assessment. 3-4 above and mild; grade 3 and below Evident; or cloth at a distance of 60cm visible defects obvious defects. 5.3.3 are not included in this standard defect, according to similar defects were evaluated. 5.3.4 stitch non-woven interlining appearance quality classification prescribed in Table 2. Table 2 Appearance quality classification regulations Item Unit Premium grade First grade Qualified Leak (continuous or diameter of less than 3.00 1cm) at/100m2 ≤5 ≤5 ≤15 Impurities, foreign bodies, 1mm2 ~ 3mm2 office/100m2 ≤5 ≤5 ≤15 Fold, width 2mm m/100m2 ≤20 ≤50 ≤80 Crimping missing m/100m ≤6 ≤8 ≤10 Trimming bad cm/100m ≤10 ≤20 ≤40 Powder out - not allowed not allowed not allowed Oil, stains, pulp spot, insect traces, color fiber - allowed not allowed not allowed Flap obviously, the tight side, punctured side - allowed not allowed not allowed Width tolerance cm -1.0 ~ 2.0 -1.5 ~ 2.0 -2.0 ~ 2.0 Color Similar swatches grade ≥3 ≥3 ≥2-3 Reference sample stage ≥2-3 ≥2-3 ≥2 package Tank volume and the volume level ≥4 ≥3-4 - Box and case-level ≥3-4 ≥3 - Stitch Claim Off-line, ≤10cm office/100m allowed ≤3 ≤5 Needle stitching - No jumpers, floating needle, drain Needle, needle bias Jumpers, floating, missing pin at no more than 2 per needle, do not allow Xu more than 3/100m Stitching quality - Track uniform, straight, strong, narrow width the same, no fold cloth; sets of pins being sewn 1cm Above the fixed sewing, beginning and ending at the needle should fight back Stitches density pin/30mm ≥9 Stitching pitch designed to meet the requirements specified Allowed per volume segment, segment length A cut Sec Each of not less than 10m Two cut three sections Each of not less than 5m Three Shearing four Each of not less than 5m

6 Test methods

6.1 mass per unit area test methods according to GB/T 24218.1 execution, mass per unit area ratio deviation calculated by the formula (1), according to the results GB/T 8170 after about a repair to the decimal point. G = m1-m0 m0 × 100% (1) Where. G --- mass per unit area deviation rate,%; m1 --- Found mass per unit area in grams per square meter (g/m2); Mass m0 --- Nominal value per unit area in grams per square meter (g/m2). 6.2 peel strength test method according to FZ/T 01085 execution. 6.3 washing dimensional change test method is as follows. --- Sample preparation. from selvedge 10cm, 1m or more away from the end of cloth clipping a sample size of 300mm × 300mm. Specimen Not have stains, color stains, grease, demolition marks and leaking powder coating unevenness and other bonding process affect the appearance of defects exist, the test clip Sample is placed under the standard condition GB/T 6529 regulations placed 4h, using a suitable printing apparatus in a sample of the uncoated side, along Vertical and horizontal spacing of 250mm each marked with three pairs of markers. A sample from each group shall mark selvage 25mm or so each interval of about 100mm ± 10mm, see figure 1. Figure 1 with each group mark interval schematic --- Standard fabric preparation. Press FZ/T 01076 standard selection of fabrics from the fabric edge 10cm, 1m or more away from the end of cloth fabric two standard clips Block, slightly larger than the size of the sample. --- The two standards covering both sides of the interlining fabric sample, surrounded by two layers of standard package sewing machine fabric stitching, press GB/T 8629-2001 program in imitation of hand wash washed once. --- End of the wash program, remove the suture samples, sutures, and then remove the interlining sample, according to GB/T 8629-2001 program C (Smoothing dry) or program F (oven drying) process, when the dispute to the program C (smoothing dry) prevail. And placed GB/T 6529 standard atmosphere specified in the balance 4h. --- Measuring longitudinal and transverse direction of each set of three data, accurate measurement to 0.5mm, respectively averaging L1, in millimeters. vertical, Transverse dimensional change rate were washed according to formula (2) calculation, calculation results by GB/T 8170 after repair about to one decimal place. Negative Sign (-) indicates the size reduction (shrink), positive sign () represents size is increased (elongated). C = L1-L0 L0 × 100% (2) Where. C --- vertical and horizontal washing dimensional change rate,%; Before the test the L0 --- the average distance between marked lines reference unit is millimeters (mm); The average distance between the reference markers, test the unit after L1 --- millimeters (mm). 6.4 combination of heat dimensional change of sample rate test method according to FZ/T 01082 performed while visually stitching polyester drawn yarn dry heat change in appearance Happening. 6.5 longitudinal breaking strength, elongation at break longitudinal test methods according to GB/T 24218.3 execution. 6.6 coating amount of deviation ratio test method according to FZ/T 01081 execution. After washing 6.7 composition sample change in the appearance test method according to FZ/T 01083, FZ/T 01084 execution. 6.8 Sample hot melt adhesive glue seepage test methods combined in FZ/T 01110 execution. 6.9 out of powder press FZ/T 60034 execution. 6.10 width test method according to GB/T 4666 execution. 6.11 color test method according to GB/T 250 executed. 6.12 appearance quality localized defect inspection method according to FZ/T 01075 execution.

7 Inspection rules

Product inspection rules according to GB/T 28465 execution.

8 signs and packaging

8.1 mark 8.1.1 Each roll into finished product quality mark, in line FZ/T 01074 regulations. 8.1.2 on both sides of the packaging, manufacturers should print the name and address, product name, product type, product performance standards, production Product color, production date, batch number, packaging, quantity, weight or volume, product quality levels. 8.2 Packaging 8.2.1 finished using the mandrel width plus a hard package, per roll length 100m, outside with a thickness of not less than 0.04mm polyethylene film package. 8.2.2 packaging material is white plastic bags or corrugated boxes. 8.2.3 sewing waterproof plastic bags should be firm, lap not less than 50mm, stitch density is not less than 1 needle/20mm, head and tail back needle tie. 8.2.4 corrugated outside with sealing tape, plastic packaging with packaging reinforcement.

9 Other

Special varieties or users with special requirements, agreed upon by both demand and supply agreement.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 64040-2014_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 64040-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 64040-2014_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 64040-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.