|
US$349.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 53003-2012: Polyester top
Status: Valid FZ/T 53003: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 53003-2012 | English | 349 |
Add to Cart
|
3 days [Need to translate]
|
Polyester top
| Valid |
FZ/T 53003-2012
|
| FZ/T 53003-1999 | English | 479 |
Add to Cart
|
4 days [Need to translate]
|
(Polyester tops)
| Obsolete |
FZ/T 53003-1999
|
PDF similar to FZ/T 53003-2012
Basic data | Standard ID | FZ/T 53003-2012 (FZ/T53003-2012) | | Description (Translated English) | Polyester top | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W52 | | Classification of International Standard | 59.060.20 | | Word Count Estimation | 15,118 | | Older Standard (superseded by this standard) | FZ/T 53003-1999 | | Quoted Standard | GB/T 3291.1; GB/T 3291.3; GB/T 4146; GB/T 4146.1; GB/T 6503; GB/T 6529; GB/T 8170; GB/T 14189; GB/T 14335; GB/T 14339; FZ/T 50004 | | Regulation (derived from) | Ministry of Industry and Information Technology Bulletin 2012 No. 20; industry standard filing Notice 2012 No. 7 (No. 151 overall) | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the terms and definitions polyester tops, product identification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage requirements. This standard applies to linear density of 1. 33 | FZ/T 53003-2012: Polyester top---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Polyester top
ICS 59.060.20
W52
People's Republic of China textile industry standards
Replacing FZ/T 53003-1999
Polyester tops
Issued on. 2012-05-24
2012-11-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China released
Foreword
This standard was drafted in accordance with GB/T 1.1-2009 given rules.
This standard is a revision of FZ/T 53003-1999 "polyester tops" of.
Instead of the standard FZ/T 53003-1999, compared with the original standard, in addition to editorial changes, the major technical changes are as follows.
--- Linear density from the original "2.80 ~ 3.90dtex (2.5 ~ 3.5d)" extended to "1.33dtex ~ 6.67dtex", the average length of the
The original "is less than or equal to 100mm" extended to "less than or equal to 110mm", and an increase in extinction (see Chapter 1,
Chapter 1 of the 1999 edition);
--- Increasing the product identification section (see Chapter 4);
--- The original "product class is divided into superior products, first-class product, second product, third-class products four grades lower than those for the third-class goods substandard goods" to
"Products are divided into superior products, first-class products, qualified three levels below the qualified product is substandard products", delete the original 4.4.2 (see 5.1,
1999 edition 4.4);
--- Original by superior products, first-class product, second product, third grade specified target different products adjusted to the linear density range 1.33dtex ~
2.10dtex, 2.11dtex ~ 3.32dtex, 3.33dtex ~ 6.67dtex products and superior products, first-class products, qualified unequal
Level redefined index value (see 52, 1999 version 4.1.);
--- Increasing the linear density of the technical requirements (see 5.4);
--- Original 5.9 "180 ℃ dry heat shrinkage for determination of execution prescribed in Appendix A.8. Single fiber arbitration law" to "Press
FZ/T 50004 regulations "(see 68, 1999 version 5.9.);
--- Revised chapter inspection rules (see 72, 1999 version 4.3.);
--- Packaging, labeling, transportation and storage of a chapter into signs, packaging, transport and storage, remove the logo and the packet number of different levels with different colors
Predetermined color flag, an increase of non-fixed weight per package product quality and differentiation of products on behalf of the same batch of fixed weight does not exceed the quality of advice
± 5% over the requirement to retain and modify the packaging, labeling, transportation and storage of parts (see Chapter 8, 1999 edition
Chapter 7);
--- Original title Appendix A supplement into a normative appendix, increasing the scope of chapter, an increase of online sampling methods; deleted 180 ℃ dry
Shrink rate measurement and determination of moisture regain chapters, each test method to increase the test principle, increase the average length of a simplified calculation
Formula (see Appendix A, 1999 edition of Appendix A).
The standard proposed by China Textile Industry Association.
This standard by the Shanghai textile industry technical supervision of the centralized.
This standard was drafted. Jiangsu Jiangnan High Fiber Co., Ltd., Shanghai textile industry technical supervision.
The main drafters of this standard. Pu Jinlong, Xu Jianfeng, Li Hongjie, Chen Zhou Germany.
This standard replaces the standards previously issued as follows.
--- ZBW52012-1990;
--- FZ/T 53003-1999.
Polyester tops
1 Scope
This standard specifies the terms and definitions of polyester tops, product identification, technical requirements, test methods, inspection rules, marking, packaging, transportation
And storage requirements.
This standard applies to the linear density 1.33dtex ~ 6.67dtex, bright, semi dull, dull character, circular cross-section, with an average length of less than
Or equal to 110mm, straight strips of polyester tops. Other polyester tops can refer to use.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 3291.1 textile material properties and test - Part 1. fibers and yarns
GB/T 3291.3 textile material properties and test - Part 3. General
GB/T 4146 Textile terms (chemical fibers)
GB/T 4146.1 Textiles chemical fiber - Part 1. generic name
GB/T 6503 Test Methods for chemical fiber moisture regain
GB/T 6529 Textiles Standard conditioning and testing atmosphere
GB/T 8170 repair value expressed about the rules and limit values and judgment
GB/T 14189 fiber grade polyester chip (PET)
GB/T 14335 chemical fiber staple linear density test method
GB/T 14339 chemical fiber staple defect test method
FZ/T 50004 polyester staple fiber dry heat shrinkage test method
3 Terms and Definitions
GB/T 3291.1, GB/T 3291.3, GB/T 4146 and GB/T 4146.1 defined and the following terms and definitions apply to this
file.
3.1
Article weight topmass
Number of quality g 1m hairy strip has under specified conditions.
3.2
Gross grain neps
Fiber kink into small granular, the naked eye can clearly identify, flick around, who still can not untie.
3.3
Maopian cardneps
Fiber kink into small pieces, the naked eye can clearly identify, flick around, who still can not untie.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 53003-2012_English be delivered?Answer: Upon your order, we will start to translate FZ/T 53003-2012_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 53003-2012_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 53003-2012_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 53003-2012?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 53003-2012 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|