HOME Cart(1) Quotation About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

FZ/T 50046-2019 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 50046-2019: High modulus fibers - Test method for tensile properties of single high modulus fiber
Status: Valid

Standard ID	Contents [version]	USD	STEP2	[PDF] delivered in	Standard Title (Description)	Status	PDF
FZ/T 50046-2019	English	229	Add to Cart	3 days [Need to translate]	High modulus fibers - Test method for tensile properties of single high modulus fiber	Valid	FZ/T 50046-2019

PDF similar to FZ/T 50046-2019

Standard similar to FZ/T 50046-2019

GB/T 43015 GB/T 39026 FZ/T 50014 FZ/T 50055 FZ/T 50056 FZ/T 50054

Basic data

Standard ID	FZ/T 50046-2019 (FZ/T50046-2019)
Description (Translated English)	High modulus fibers - Test method for tensile properties of single high modulus fiber
Sector / Industry	Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard	W50
Classification of International Standard	59.060.20
Word Count Estimation	10,136
Date of Issue	2019
Date of Implementation	2020-04-01
Issuing agency(ies)	Ministry of Industry and Information Technology of the People's Republic of China
Summary	This standard specifies the test methods for the tensile properties of single fibers of high modulus fibers. This standard applies to high modulus fibers, other chemical fibers can be used as a reference.

FZ/T 50046-2019: High modulus fibers - Test method for tensile properties of single high modulus fiber

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
High modulus fibers-Test method for tensile properties of single high modulus fiber ICS 59.060.20 W50 People's Republic of China Textile Industry Standard High modulus fiber single fiber tensile properties test method modulusfiber Published on November 11,.2019 2020-04-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard was proposed by the China National Textile and Apparel Council. This standard is under the jurisdiction of Shanghai Textile Industry Technical Supervision. This standard was drafted by. Guangzhou Fiber Products Testing and Research Institute, Shanghai Textile Industry Technical Supervision Institute, Lianyungang Fiber Inspection Center, Shanghai Textile Group Testing Standard Co., Ltd., Anhui Product Quality Supervision and Inspection Institute, Beijing Tongyi Zhongxin Material Technology Co., Ltd. the company. The main drafters of this standard. Sun Xiaohui, Sun Yu, Ding Zhenhua, Liang Yan, Wu Kaiqi, Huang Xingliang, Zhou Zhende. High modulus fiber single fiber tensile properties test method

1 Scope

This standard specifies the test method for the tensile properties of single fibers with high modulus fibers. This standard applies to high modulus fibers, other chemical fibers can refer to use.

2 Normative references

The following documents are essential for the application of this document. For dated references, only the dated version applies to this article Pieces. For the cited documents without date, the latest version (including all amendments) applies to this document. GB/T 4146 (all parts) textile chemical fiber GB/T 6504-2017 Chemical fiber oil content test method GB/T 6529 Standard atmosphere for humidity control and testing of textiles GB/T 29762 Determination of the diameter and cross-sectional area of carbon fiber FZ/T 01057.7 Textile fiber identification test method Part 7. Density gradient method

3 Terms and definitions

The terms and definitions defined in GB/T 4146 (all parts) and the following apply to this document. 3.1 Tensile modulus The ratio of stress increment to strain increment between two points is specified on the strength-elongation curve. 3.2 System compliance K systemcomplianceK Correction factor for indicating elongation due to loading system and specimen clamping system. 3.3 Sample pad specificationmounting Support the shim held by the specimen.

4 Principle

The single fiber is stretched to break on the constant velocity elongation extensometer under the specified conditions, from the strength-elongation curve or data display acquisition system The measured values such as breaking strength and breaking elongation of the sample are obtained in. Combining the fiber cross-sectional area or linear density to calculate the breaking strength, tensile modulus, etc. The strength and elongation during the stretching process may be non-linear, and the tensile modulus should be calculated to define the position of the string. The tensile modulus needs to be corrected according to the system compliance.

5 Instruments and materials

5.1 Tensile testing machine (constant speed extension type) 5.1.1 The tensile testing machine should be equipped with the following devices.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 50046-2019_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 50046-2019_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 50046-2019_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 50046-2019_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.