|
US$139.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 50039-2018: Elastane filament yarn - Test method for the cohesive performance
Status: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 50039-2018 | English | 139 |
Add to Cart
|
2 days [Need to translate]
|
Elastane filament yarn - Test method for the cohesive performance
| Valid |
FZ/T 50039-2018
|
PDF similar to FZ/T 50039-2018
Basic data | Standard ID | FZ/T 50039-2018 (FZ/T50039-2018) | | Description (Translated English) | Elastane filament yarn - Test method for the cohesive performance | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W50 | | Word Count Estimation | 6,657 | | Date of Issue | 2018-04-30 | | Date of Implementation | 2018-09-01 | | Regulation (derived from) | Ministry of Industry and Information Technology Announcement No. 23 of 2018 | | Issuing agency(ies) | Ministry of Industry and Information Technology of the People's Republic of China | | Summary | This standard specifies the test method for the cohesion performance of polyurethane (spandex) filaments. | FZ/T 50039-2018: Elastane filament yarn - Test method for the cohesive performance---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Spandex filament cohesion test method)
ICS 59.060.20
W50
People's Republic of China Textile Industry Standard
Test method for the cohesion performance of spandex filament
Published on.2018-04-30
2018-09-01 implementation
Ministry of Industry and Information Technology of the People's Republic of China
People's Republic of China
Industry Standard
Test method for the cohesion performance of spandex filament
China Standard Press Publishing
First edition, June.2018
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the China National Textile and Apparel Council.
This standard is under the jurisdiction of Shanghai Textile Industry Technical Supervision.
This standard was drafted. Changle Hengshen Synthetic Fiber Technology Co., Ltd., Shanghai Textile Industry Technology Supervision Institute, Yantai Taihe New Materials Co., Ltd.
Co., Ltd., Xinxiang Chemical Fiber Co., Ltd., China Chemical Fiber Industry Association.
The main drafters of this standard. Jiang Tongde, You Yuanqing, Li Hongjie, Wei Huifang, Chen Lidong, Wan Lei, Gao Jie.
Test method for the cohesion performance of spandex filament
1 Scope
This standard specifies the test method for the cohesion performance of polyurethane (spandex) filaments.
This standard applies to spandex filaments.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Textiles and textiles - Performance and test terms - Part 1. Fibres and yarns
GB/T 3291.3 Textiles and textile materials - Performance and test terms - Part 3
GB/T 4146 (all parts) Textile chemical fiber
GB/T 6502 chemical fiber filament sampling method
3 Terms and definitions
The terms and definitions defined in GB/T 3291.1, GB/T 3291.3, GB/T 4146 (all parts) apply to this document.
4 Principle
Under the specified conditions, the force value required to peel a single filament from the spandex tow indirectly reflects the cohesive properties of the spandex filament.
5 test device
Single fiber strength meter, with.
a) Force value sensor. the division value is 0.01cN;
b) Fixture. The movement distance accuracy is ±0.05mm.
6 Sampling and test conditions
6.1 Sample Preparation
6.1.1 Batch laboratory sample extraction According to GB/T 6502, take 20 packages, and take 2 samples for each volume.
6.1.2 Laboratory samples of spare parts, the total number of tests is not less than 30 times.
6.1.3 Each package shall be stripped of approximately 1 g of surface layer, and approximately 10 cm of sample shall be taken from each package. On the same volume
When the sample is loaded, the first sample is taken, and the wire on the package is removed by at least 2 m, and then the second sample is taken. The sample should be as
Small tension is unwound to avoid accidental stretching.
6.1.4 Maintain the sample at a temperature of (20 ± 2) °C without tension, and adjust the humidity in a standard atmosphere of humidity (65 ± 5)%.
4h and tested in a standard atmospheric environment.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 50039-2018_English be delivered?Answer: Upon your order, we will start to translate FZ/T 50039-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 50039-2018_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 50039-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|