HOME   Cart(6)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (19 Oct 2025)

FZ/T 50038-2017 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 50038-2017: Lower melting point polyester(PET) composite fibers. Test method for bonding temperature
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusPDF
FZ/T 50038-2017English119 Add to Cart 3 days [Need to translate] Lower melting point polyester(PET) composite fibers. Test method for bonding temperature Valid FZ/T 50038-2017

PDF similar to FZ/T 50038-2017


Standard similar to FZ/T 50038-2017

GB/T 43015   GB/T 39026   FZ/T 50014   FZ/T 50033.10   FZ/T 50048   FZ/T 50045   

Basic data

Standard ID FZ/T 50038-2017 (FZ/T50038-2017)
Description (Translated English) Lower melting point polyester(PET) composite fibers. Test method for bonding temperature
Sector / Industry Spinning & Textile Industry Standard (Recommended)
Classification of Chinese Standard W50
Classification of International Standard 59.060.20
Word Count Estimation 5,511
Date of Issue 2017-11-07
Date of Implementation 2018-04-01
Quoted Standard GB/T 4146.1; GB/T 4146.2; GB/T 4146.3; GB/T 19466.1; GB/T 19466.3
Regulation (derived from) Ministry of Industry and Information Technology Bulletin 2017 No. 48
Issuing agency(ies) Ministry of Industry and Information Technology of the People's Republic of China
Summary This standard specifies the test method for bonding temperature of low-melting polyester (PET) composite fibers. This standard applies to low-melting point polyester (PET) composite staple fibers and filaments, and other types of fibers can be used as reference.

FZ/T 50038-2017: Lower melting point polyester(PET) composite fibers. Test method for bonding temperature


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
(Low melting point polyester (PET) composite fiber bonding temperature test method) ICS 59.060.20 W50 People's Republic of China Textile Industry Standard Low-melting polyester (PET) composite fiber Bonding temperature test method Published on.2017-11-07 Implementation of.2018-04-01 The Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is proposed by the China Textile Industry Federation. This standard is under the jurisdiction of the Shanghai Municipal Technical Supervision Institute of Textile Industry. This standard was drafted by. Shanghai Textile Industry Technical Supervision, Shanghai Textile Group Testing Standard Co., Ltd., Ningbo Dafa Chemical Fiber Co., Ltd. Limited Company, Yuanfang Industry (Shanghai) Co., Ltd., Xiamen Xianglu Chemical Fiber Co., Ltd., Tongkun Group Zhejiang Hengteng Differential Fiber Co., Ltd. the company. The main drafters of this standard. Li Hongjie, Lu Xiuqin, Zhuang Yingxiao, Xing Xiquan, Ren Zhongsheng, Zhong Gangda, Jiang Jieqiang. Low-melting polyester (PET) composite fiber Bonding temperature test method

1 Scope

This standard specifies the test method for bonding temperature of low-melting polyester (PET) composite fibers. This standard applies to low-melting point polyester (PET) composite staple fibers and filaments, and other types of fibers can be used as reference.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 4146 (all parts) textile chemical fiber GB/T 19466.1 Plastics differential scanning calorimetry (DSC) Part 1. General rules GB/T 19466.3 Plastics - Differential scanning calorimetry (DSC) - Part 3. Determination of melting and crystallization temperature and enthalpy

3 Terms and Definitions

The terms and definitions defined in GB/T 4146 (all parts), GB/T 19466.1, and GB/T 19466.3 apply to this document.

4 Principle

The differentially scanned calorimetric curves of the samples were measured by differential scanning calorimetry (DSC) on the heat-treated samples using a programmed temperature rise method. The resulting peak melting temperature (Tpm) characterizes the bonding temperature of the sample.

5 Instruments and Tools

5.1 Differential Scanning Calorimetry (DSC), the main performance is as follows. a) It can increase the temperature at the same rate of 0.5°C/min~20°C/min; b) Keep the test temperature constant within ±0.5°C for at least 60 minutes; c) The ability to heat up in stages or warm up in other modes; d) The gas flow rate is in the range of 10mL/min to 50mL/min, and the deviation is controlled within ±10%; e) The resolution of the temperature signal is within 0.1°C and the noise is below 0.5°C; f) The instrument can automatically record the DSC curve and integrate the area between the curve and the baseline, with a deviation of less than 2%; g) Sample holder assembly with one or more sample holders. 5.2 Specimen dish. stainless steel, able to seal and withstand the overpressure generated during the measurement process. 5.3 Analytical balance. 0.1mg. 5.4 Standard sample. Indium, melting temperature 157°C, purity ≥99.9%; tin, melting temperature 231°C, purity ≥99.9%. 5.5 Air source. Nitrogen, purity ≥99.99%. 5.6 oven. temperature control accuracy ± 3 °C, temperature fluctuations ± 1 °C.

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of FZ/T 50038-2017_English be delivered?

Answer: Upon your order, we will start to translate FZ/T 50038-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of FZ/T 50038-2017_English with my colleagues?

Answer: Yes. The purchased PDF of FZ/T 50038-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.