|
US$209.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
FZ/T 93004-2002: Spinning plus twisting plastic hooks
Status: Valid FZ/T 93004: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| FZ/T 93004-2002 | English | 209 |
Add to Cart
|
3 days [Need to translate]
|
Spinning plus twisting plastic hooks
| Valid |
FZ/T 93004-2002
|
| FZ 93004-1991 | English | RFQ |
ASK
|
3 days [Need to translate]
|
(Spinning and twisting with a plastic hook)
| Obsolete |
FZ 93004-1991
|
| FZ/T 93004-1991 | English | 199 |
Add to Cart
|
2 days [Need to translate]
|
Spinning Plus Twisting Plastic Hooks
| Obsolete |
FZ/T 93004-1991
|
PDF similar to FZ/T 93004-2002
Basic data | Standard ID | FZ/T 93004-2002 (FZ/T93004-2002) | | Description (Translated English) | Spinning plus twisting plastic hooks | | Sector / Industry | Spinning & Textile Industry Standard (Recommended) | | Classification of Chinese Standard | W93 | | Classification of International Standard | 59.120.10 | | Word Count Estimation | 7,757 | | Date of Issue | 2002-09-28 | | Date of Implementation | 2003-01-01 | | Older Standard (superseded by this standard) | FZ/T 93004-1991 | | Quoted Standard | GB/T 2828-1987; GB/T 2829-1987 | | Adopted Standard | ISO 96-2-1992, NEQ | | Issuing agency(ies) | National Economic and Trade Commission of the People Republic of China | | Summary | This standard specifies the spinning and twisting plastic hook (hereinafter referred to as " plastic hook ") product classification, technical requirements, test methods, inspection rules and signs, packaging. This standard applies to spinning and twisting vertical plane of the ring and cone steel requisitioned plastic hook. | FZ/T 93004-2002: Spinning plus twisting plastic hooks---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Spinning plus twisting plastic hooks
ICS 59.120.10
W93
Record number. 11038-2002
People's Republic of China Textile Industry Standard
FZ/T 93004-2002
Replace FZ/T 93004-1991
Plastic hook for spinning and twisting
(ISO 96-2.1992, Textilemachineryandaccessories-
Part 2. HZCH-, HZ-andJ-ringsandtheirappropriatetravelers, NEQ)
Released on.2002-09-28
2003-01-01 implementation
The National Economic and Trade Commission of the People's Republic of China
Foreword
The ring wire series for ring spinning and twisting consists of three standards.
---Rolling wire for spinning and twisting;
---Metal hooks for spinning and twisting;
--- Plastic hooks for spinning and twisting.
The degree of conformity between this standard and ISO 96-2.1992 is non-equivalent, the main differences are as follows.
--- Removed the provisions relating to the metal collar and its application to metal hooks;
--- The number range of plastic hooks is reduced to 25, 28, 10000;
--- Added requirements for plastic hooks, such as its material, surface roughness, color and surface quality;
--- Added Chapter 5 "Test Methods", Chapter 6 "Inspection Rules", Chapter 7 "Packaging, Marking";
--- Change some expressions applicable to international standards to those applicable to Chinese standards.
This standard replaces FZ/T 93004-1991 "Plastic hook for spinning and twisting". The main changes of this standard compared with the previous version are as follows.
--- Cancel the type of plastic hooks (3.1 and 3.3 of the.1991 edition, 3.1 and 3.4 of this standard);
--- Deleted the plastic hook type code, and replaced it with the name of the plastic hook type (manufactured by the.1991 version of 3.4, 3.4 of this standard);
---With the steel ring height dimension series adjustment;
--- Increased the surface roughness Ra of the plastic hook;
---Modification supplements the appearance defects;
--- The inspection rules have added the content of the type inspection.
FZ/T 93004 is one of the series of standard for wire loops for ring spinning and twisting. Listed below and the structure of these industry standards
International standards to be applied, and industry standards to be replaced.
a) Steel wire loops for spinning and twisting (ISO 96-1.1992, replacing FZ/T 93002-1991, FZ/T 90041-1992);
b) metal hooks for spinning and twisting (ISO 96-2.1992, replacing FZ/T 93003-1991);
c) Plastic hooks for spinning and twisting (ISO 96-2.1992, replacing FZ/T 93004-1991).
Appendix A of this standard is an informative annex.
This standard was proposed by the China Textile Industry Association.
This standard is under the jurisdiction of Shaanxi Textile Equipment Research Institute.
This standard was drafted by Shaanxi Textile Equipment Research Institute, and Beijing Textile Machinery Research Institute participated in the drafting.
The main drafters of this standard. Zhao Yusheng, Jia Donglin.
The previous versions of the standards replaced by this standard are.
---FZ/T 93004-1991.
FZ/T 93004-2002
Plastic hook for spinning and twisting
1 Scope
This standard specifies the product classification, technical requirements, test methods and inspection rules for plastic hooks for spinning and twisting (hereinafter referred to as "plastic hooks").
Then with signs, packaging.
This standard is applicable to plastic hooks for spinning and twisting steel collars and tapered steel collars.
2 Normative references
The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all
Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study
Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard.
GB/T 2828-1987 Batch-by-batch inspection sampling procedure and sampling table (for continuous batch inspection)
GB/T 2829-1987 Periodic inspection count sampling procedure and sampling table (applicable to the inspection of the stability of the production process)
3 classifications and signs
3.1 According to the steel collar type, the plastic hook is divided into two types. HZ-type vertical steel collar and J-shaped tapered steel collar.
3.2 The number of plastic hooks is the gram value indicating the nominal mass of 1000 plastic hooks of the same type.
3.3 The type of plastic hook, the number series and the height of the steel collar to be used shall comply with the requirements of Figure 1, Figure 2 and Table 1.
Fig.1 Basic shape of plastic hook for HZ vertical steel collarFig.2 Basic shape of plastic hook for J-shaped tapered steel collar
FZ/T 93004-2002
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of FZ/T 93004-2002_English be delivered?Answer: Upon your order, we will start to translate FZ/T 93004-2002_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of FZ/T 93004-2002_English with my colleagues?Answer: Yes. The purchased PDF of FZ/T 93004-2002_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version FZ/T 93004-2002?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version FZ/T 93004-2002 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|