|
US$1179.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
CNCA C11-02-2021: Implementation Rules for Compulsory Product Certification - Motorcycles
Status: Valid CNCA C11-02: Evolution and historical versions
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CNCA C11-02-2021 | English | 1179 |
Add to Cart
|
8 days [Need to translate]
|
Implementation Rules for Compulsory Product Certification - Motorcycles
| Valid |
CNCA C11-02-2021
|
| CNCA C11-02-2014 | English | 1210 |
Add to Cart
|
0--9 seconds. Auto-delivery
|
[Including 2017XG1] China Compulsory Certification Implementation Rules - Motorcycle
| Obsolete |
CNCA C11-02-2014
|
PDF similar to CNCA C11-02-2021
Standard similar to CNCA C11-02-2021 GB/T 5359.1 CNCA C11-02 QC/T 791 Basic data | Standard ID | CNCA C11-02-2021 (CNCA-C11-02-2021) | | Description (Translated English) | Implementation Rules for Compulsory Product Certification - Motorcycles | | Sector / Industry | China Compulsory Certification (CCC) Implementation Rules | | Classification of Chinese Standard | T80 | | Word Count Estimation | 51,572 | | Issuing agency(ies) | China National Accreditation Administration for Certification and Accreditation | CNCA C11-02-2021: Implementation Rules for Compulsory Product Certification - Motorcycles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Number. CNCA -C11-02.2021
Compulsory product certification implementation rules
motorcycle
Issued by the National Certification and Accreditation Administration Committee
1 Scope of application
This rule applies to motorcycles running on Chinese roads and urban roads.
The specific scope of application and due to laws and regulations or related product standards, technologies, and industrial policies
The adjustment of the scope of application caused by changes in policies and other factors shall be subject to the State Administration for Market Regulation (Certification and Administration)
Committee) shall prevail.
2 Terms and Definitions
For the definition of motorcycle, see GB 7258 "Technical Conditions for Safe Operation of Motor Vehicles";
For classification, see GB/T 15089 "Classification of Motor Vehicles and Trailers".
3 Certification based on standards
Manufacturers should fully implement the motorcycle safety, environmental protection, energy saving, anti-theft regulations promulgated by the state
And other standards and regulations, and meet the requirements.
The standard for the certification basis of this rule is shown in Appendix 1 "Certification Standards and Type Test Items".
In principle, the standards on which the certification is based should be issued by the national standardization administrative department.
The latest version of. When it is necessary to increase or decrease applicable standards or use other versions and terms of standards,
It shall be implemented in accordance with the announcement issued by CNCA on applicable relevant standards.
2 The certification body shall specify the era of the applicable standard in the certification implementation rules (if necessary
Indicate article number).
4 authentication modes
The basic certification mode for the implementation of motorcycle compulsory product certification is as follows.
(1) Type test enterprise quality assurance capability and product consistency inspection (initial factory
inspection) post-certification surveillance
The quality assurance ability and product consistency inspection of motorcycle manufacturers shall be carried out in accordance with the production consistency
sex check.
Supervision after certification refers to follow-up inspection after certification, production or on-site sample inspection at ports.
One or various combinations of the three methods of testing or inspection, market sampling testing or inspection.
(2) Type test (bicycle certification)
Each motorcycle shall undergo a type test, and the relevant requirements shall be specified by the certification body in the implementation details of the certification.
is specified in the rules.
The authentication principal can choose one of the above two basic authentication modes to complete the authentication. recognize
The certification body shall follow the "Compulsory Product Certification Implementation Rules for the classification management and certification of production enterprises"
According to the requirements of "Mode Selection and Determination", the production enterprises should be managed by classification, which can be combined with classification management
As a result, on the basis of the basic authentication model, the authentication elements are added to determine the ability of the authentication client
Applicable authentication mode.
5 Division of certification units
In principle, motorcycles are entrusted with certification according to the certification unit, and the same certification entrusted unit
Motorcycles should meet the conditions of the vehicle type.
6.1 Proposal and acceptance of certification entrustment
The certification principal shall submit the certification entrustment to the certification body in an appropriate manner. certification body
The certification entrustment shall be handled, and the feedback shall be accepted according to the time limit requirements in the certification implementation rules
or inadmissible information.
Certification agencies shall not accept applications that do not meet the requirements of national laws and regulations and relevant industrial policies.
Relevant certification entrustment.
The certification client should be able to bear relevant quality and legal responsibilities such as recalls and "three guarantees".
6.2 Commissioned information
The certification body shall, in accordance with laws and regulations, standards and the needs of certification implementation, implement details of certification
The entrusted certification materials list is clearly specified in the rules (should include at least the certification power of attorney or contract, certification commission
Trustee/producer/manufacturer’s registration certificate, etc.), the certified product information should meet the attachment
2 The requirements of "Motorcycle Product Structure and Technical Parameters".
When necessary, exempt from enterprise quality assurance ability and product consistency inspection in the implementation of certification
production enterprises, the certification body may require the certification client to submit the relevant enterprise quality information of the production enterprise
Self-assessment report for assurance capability and product conformity control.
The certification client shall provide the required information in accordance with the requirements of the entrusted material list in the certification implementation rules.
material. The certification body is responsible for reviewing, managing, saving and keeping confidential relevant materials, and
The verification results are notified to the certification client.
6.3 Implementation arrangements
The certification body shall agree with the certification client on the relevant aspects of each link in the implementation of certification.
Responsibilities and arrangements, and according to the actual situation of the production enterprise and the classification management situation, in accordance with these rules and recognized
4.According to the requirements of the detailed rules for the implementation of the certification, determine the specific plan for the implementation of the certification and inform the certification client.
7 Authentication implementation
7.1 Type test
The certification body shall specify the specific requirements for type testing in the implementation rules for certification.
7.1.1 Type test plan
The certification body shall formulate a type test plan after data review and inform the certification client.
The type test plan includes all samples (including accessories and accessories) requirements and
Quantity, testing standards, testing items, laboratory information, etc.
The type test shall be undertaken by a laboratory designated by CNCA, and the certification client may
Choose from the scope of the laboratory.
The certification body can assess the overall risks of producers, production enterprises and certified products
Under the premise, start to intervene and implement product certification in the conceptual design stage of the product, according to the company's
Design process, trial production and test capabilities, formulate certification schemes, and make product design and product certification
process simultaneously.
7.1.2 Type test sample requirements
Usually, the certification client prepares samples according to the requirements of the type test plan and sends them to the designated laboratory
laboratory; when necessary, the certification body may obtain on-site sampling in accordance with the type test plan
Get samples.
The selection of samples is based on the same vehicle type, combined with the exemption from the test in the relevant standards
One sample can be selected for the type test items of the same type; it cannot be judged as the same vehicle
The items of the vehicle type should select samples separately, and the test samples corresponding to all the test items should be integrated.
Determine total sample quantities and requirements.
The certification client shall ensure that the samples it provides are consistent with the actual normal production products.
Vehicle certification should ensure that the real vehicle is consistent with the declared vehicle information, and the certification agency and/or experiment
The laboratory shall review the authenticity of the samples provided by the certification client. Lab Versus Sample Authenticity
In case of doubt, the situation shall be explained to the certification body and dealt with accordingly.
7.1.3 Type test items and requirements
The certification body, together with the laboratory, in accordance with the provisions of these rules, combined with the entrusted certification by the certification principal
5.The testing standard, vehicle type, structure and technical parameters of the certified vehicle are used to confirm the test items.
Different products under the same vehicle type need to supplement the difference test. For type test items, see Appendix 1
"Certification Basis Standards and Type Test Items".
Due to technological progress, the vehicle or related systems and components adopt new designs and new processes
The producer and/or manufacturer shall provide the verification results of the vehicle meeting the relevant safety standards,
Judgment by the certification body.
7.1.4 Implementation of type test
The type test shall be carried out by the certification body to confirm that the entrusted materials submitted by the certification client meet the
After requesting and formulating the test plan.
The laboratory conducts type tests on samples, and shall ensure that the test conclusions are true and accurate.
Make a complete record of the whole testing process and keep it on file to ensure the traceability of the testing process and results
sex.
For products that have obtained compulsory product certification (including self-declaration), check their
Accept the result after the effect. For the recognition of other conformity assessment results, the certification body shall
Relevant requirements are specified in the implementation rules.
If the production enterprise has "mandatory product certification implementation rules production enterprise testing resources
and the use of other certification results" and the testing conditions required by the certification standards, the certification body can use
Use the testing resources of the production enterprise to implement sampling testing (or witness testing) at the production site, and the
The designated laboratory issues a test report. The certification body shall specify the specific requirements in the certification implementation rules
and procedures.
For the same type of product produced by the same producer in different production sites, the
On the premise of product consistency, the type test process can be simplified and the same part of the type test can be reduced
project.
7.1.5 Type test report
The certification body shall specify a uniform type test report format.
After the type test is completed, the laboratory shall promptly issue the type
type test report. The type test report shall contain information about the products in the certification unit and certification
description of. The certification principal shall ensure that the certification body and the law enforcement agency
The agency provides a complete and effective type test report.
67.2 Enterprise quality assurance capability and product consistency inspection (initial factory inspection)
Enterprise quality assurance capability and product consistency inspection (initial factory inspection) as certification machine
To determine whether the production enterprise quality assurance ability, product consistency and standard compliance control
On-site inspection and evaluation for compliance with certification requirements.
The initial factory inspection is generally carried out after the type test is passed. As required, type test
And initial factory inspection can also be done at the same time.
7.2.1 Basic principles
Producers and production enterprises should establish and implement
Implement and continue to maintain the enterprise product consistency and standard compliance control system to ensure that certified products
Products continue to meet certification requirements.
The certification body shall follow the "Compulsory Product Certification Implementation Rules for Factory Quality Assurance Capabilities"
Requirements" and "General Requirements for Factory Inspection of Compulsory Product Certification Implementation Rules"
The factory inspection requirements of production enterprises are specified in the implementation rules of the certification to ensure that the factory inspection requirements are implemented
bit. The factory inspection shall cover all processing sites of certified products. When necessary, the certification body may
Carry out extended inspections at locations other than the production enterprise.
For certified producers/production enterprises, the certification body can guarantee the quality of the enterprise
The timing and content of capability and product consistency checks are appropriately adjusted and simplified, and details of certification implementation
is specified in the rules.
For certified producers/production establishments, relocation or new construction within the same producer
When manufacturing enterprises, if they declare that they comply with relevant laws and regulations, have a sound quality management system, and
If the product meets the standard requirements, the certification body can "issue the certificate first and then audit the factory", and complete the inspection within three months after the certificate is issued.
To complete the enterprise quality assurance ability and product consistency inspection.
7.2.2 Factory inspection
According to the production consistency control plan to review the production consistency factory on-site inspection method.
7.2.2.1 Review of Production Consistency Control Plan
Producers or production enterprises should formulate production
Conformity control plan and submit to certification body for review. The certification body shall report the results of the review to
Inform the certification principal.
When the production consistency control plan can meet Annex 3 "Production Consistency Inspection Requirements"
At 7 o'clock, the production consistency control plan was reviewed and passed. If the certification body believes that the production consistency control
There are defects in the plan, and the manufacturer should rectify and resubmit. The certification body shall report the results of the review to
Inform the certification principal.
After passing the review of the production consistency control plan formulated by the producer or production enterprise, the certification
The organization shall prepare the on-site inspection plan of the production consistency factory according to it, and the plan shall include the inspected product
product, venue and scope.
7.2.2.2 Factory on-site inspection for production consistency
The certification body appoints an inspection team to conduct on-site inspections of the production enterprises for production consistency.
During the on-site inspection, under normal circumstances, the manufacturer should have entrusted certified products in production.
7.2.3 Structural and technical parameter check and inspection
During on-site inspection, the inspection team can refer to Appendix 1 of Appendix 3 "Product Structure and Technical Parameters
According to the requirements of "Consistency Review", select a corresponding number of certification entrusted products, and combine them with the declared vehicles
Consistency check of structure and technical parameters.
The relevant content marked on each part, system or assembly of the vehicle shall be consistent with the CCC certificate of the component.
certificate (including self-declaration), voluntary product certification certificate or structural technology filed with the certification body
The technical parameters are the same.
7.3 Certification evaluation and decision
The certification body checks the conclusion of the type test, the quality assurance capability of the enterprise and the consistency of the product
Conclusions (when applicable) and relevant data/information are comprehensively evaluated to make a certification decision. right
If it meets the certification requirements, a certification certificate will be issued according to the certification unit; for those that cannot meet the certification requirements,
If the certification entrustment is not approved, the certification will be terminated.
7.4 Certification time limit
The certification body should make clear regulations in the certification implementation rules for the time limit of each link of certification.
and ensure that related work is completed on time. The certification client must give the certification activities
Actively cooperate. For those who meet the certification requirements, generally 90 days from the acceptance of the certification entrustment
Inwardly issue the certification certificate to the certification client.
8 Post-certification supervision
8 Post-certification supervision refers to the supervision implemented by the certification body on the certified products and their production enterprises.
The certification body should combine the classification management of the production enterprise and the actual situation, and specify in the certification implementation rules
Determine the specific requirements for the selection of post-certification supervision methods.
8.1 Follow-up inspection after certification
The certification body shall, on the basis of classified management, implement the
Effective follow-up inspections to verify that the quality assurance capabilities of manufacturers continue to meet certification requirements,
Ensure that certified products continue to meet standard requirements and maintain consistency with type test samples.
The follow-up inspection after obtaining the certificate should be carried out during the normal production of the production enterprise, and priority should be given to those who do not pass the inspection in advance.
The method of knowing the inspected party is carried out. For products that are not continuously produced, the certification client shall submit to the certification
The relevant production plan shall be submitted by the certification body to facilitate the effective implementation of follow-up inspection after certification. when necessary,
The certification body may conduct extended inspections at locations other than the production enterprise.
The certification body shall follow the "Compulsory Product Certification Implementation Rules for Factory Quality Assurance Capabilities"
"Requirements" and "Compulsory Product Certification Implementation Rules General Requirements for Factory Inspection", Annex 3 "Production
Product Consistency Inspection Requirements" formulate the specific content of follow-up inspection requirements after certification, and
be specified in the implementation rules.
8.2 Sample testing or inspection at the production site
Where post-certification supervision is carried out by taking samples from the production site for testing or inspection, the
The certificate consignor, producer, and production enterprise shall cooperate.
The certification body shall specify in the implementation rules of the certification that the sampling test or inspection of the production site
content and requirements.
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CNCA C11-02-2021_English be delivered?Answer: Upon your order, we will start to translate CNCA C11-02-2021_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CNCA C11-02-2021_English with my colleagues?Answer: Yes. The purchased PDF of CNCA C11-02-2021_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. Question 5: Should I purchase the latest version CNCA C11-02-2021?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version CNCA C11-02-2021 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.
|