Chinese Standards Shop Partner of Google-Books Database: 169759 (Sep 15, 2019)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

CNCA C11-02-2014

Search Result of Chinese Standard: 'CNCA C11-02-2014'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
CNCA C11-02-2014English2099 ASK Days<=14 China Compulsory Certification Implementation Rules - Motorcycle Valid CNCA C11-02-2014

   
Detail Information of CNCA C11-02-2014; CNCA-C11-02-2014
Description (Translated English): Certification and Accreditation Administration of the People's Republic of China
Sector / Industry: China Compulsory Certification (CCC) Implementation Rules
Classification of Chinese Standard: Certification and Accreditation Administration (CNCA)
Classification of International Standard: CNCA 2014 No. 31 Announcement
Word Count Estimation: 91,967
Date of Issue: 8/21/2014
Date of Implementation: 1/1/2015
Older Standard (superseded by this standard): CNCA 02C-024-2008
Quoted Standard: GB 7258; GB 21861; GB 16735; GB 16737; GB 14023; GB/T 18387; GB 14621; GB 14622; GB 18176; GB 20988; GB 15744; GB 16486; GB/T 24157; GB 20073; GB 16169; GB 4569; GB 15365; GB 17353; GB 20074; GB 20075; GB 18100.1; GB 18100.2; GB 18100.3; GB 17352; GB 1508
Drafting Organization: Certification and Accreditation Administration of the People's Republic of China
Administrative Organization: Certification and Accreditation Administration (CNCA)
Regulation (derived from): CNCA 2014 No. 31 Announcement
Summary: This standard specifies the China Compulsory Certification (CCC) implementation rules for Motorcycle. This standard defines the Motorcycle's certification unit; certification entrusting; document requirements; sample requirements; certification procedure;

CNCA C11-02-2014
CNCA -C11-02-2014
Number: CNCA -C11-02:2014
Mandatory product certification and implementation rules
motorcycle
Issued on: 2014-08-21
2015-01-01 implementation
China Certification and Accreditation Administration Commission issued
table of Contents
0 .1 Introduction
1 Scope 1
2 Terms and definitions .1
3 Standards for Certification 2
4 .2 authentication mode
5 certified application unit 2
6 .3 for Certification
6.1 certification commission proposed and accepted 3
Profile 6.2 certification commission .. 3
6.3 Implementation Arrangements 3
7 .3 Certification
7.1 Type test 3
7.2 Initial factory inspection ..5
7.3 pairs of related certification results admissible .7
7.4 Evaluation and Certification decisions ..7
7.5 Time frame for certification 7
Up inspection after 8 .7
.7 8.1 certified follow-up examination after
8.2 production site sample or to check ..8
8.3 Market sampling test or inspection .8
8.4 Application of the quality of information ..8
Frequency and time 9 8.5 up inspection
8.6 Follow-up inspection records ..9
8.7 Evaluation of the results of follow-up inspection .9
8.8 Consistency parameter management ..9
9 certification .9
Holding certificates ..9 9.1
Content 9.2 Certificate 10
Change 9.3 Certificate 10
Pause 9.4 certificates, cancellation and withdrawal .10
9.5 Certificate usage ..11
10 certification mark and Certificate of Conformity of the vehicle 11
10.1 Shape 11 mark
10.2 logo Gasch .11
10.3 vehicle certificate of conformity 11
11 Pay 12
12 12 Certification Responsibility
13 Certification Rules ..12
Annex 1: type test project and basis Standard 14
Annex 2: Motorcycles compulsory certification application unit ..18
Annex 3: Principal Certification Information .20
Annex 4: Conformity of Production requirements .64
Appendix 5: Vehicle conformance certificate .68
0 Introduction
The rules are based on security risks and risks certified motorcycle products developed, containing its provisions
Basic principles and requirements of all motorcycle products within the scope of mandatory certification, which aims
It is to ensure that certified products continue to meet motorcycle laws, regulations and standards.
The rules and CNCA issued a "compulsory product certification and implementation rules, the company classification
Management, authentication mode selection and determination "," compulsory product certification and implementation rules, the company owned detected
Other sources and use of certification results, "" compulsory product certification and implementation rules factory inspection General requirements "
Supporting the use of other common implementation rules.
The certification body should be based on common rules and requirements for the implementation of these rules, combined with production enterprises classified tube
Management, preparation of certification implementation rules, supporting the implementation of common rules and common implementation of these rules.
Manufacturers should ensure that certified products can continue to meet the certification requirements and applicable standards.
1 Scope
These rules apply to travel on Chinese highways and urban roads motorcycle products.
But does not apply to:
a, non-road driving and the use of the site and the design and manufacture of car, motor racing, off-road
Vehicles.
b, motor vehicles for the disabled (including motorized wheelchairs, electric wheelchairs, etc.), electric self
Vehicles.
Since laws and regulations or relevant product standards, technology, industrial policy and other factors cited changes
From the scope of adjustments should be based on the CNCA announcement shall prevail.
For the result of research, testing, and other special reasons for exemption shall apply for certification "Compulsory
Relevant provisions of the certification regulations, "and the implementation of the national commission.
2 Terms and definitions
See the definition of vehicle GB 7258 "the safe operation of motor vehicles technical conditions" and GB/T 5359.1 "Mount
Motorcycles and mopeds Terminology - Part 1: Vehicle type "; classification of vehicles see GB/T 15089
"Classification of motor vehicles and their trailers."
3 Standards for Certification
Certified according to the rules the criteria in Annex 1 "and type tests according to the standard."
In principle, the certification testing should be performed in accordance with standard national standardization administrative department issued
The latest version when the need to increase the use of new standards or standards applicable to other versions, the country should be recognized
JISC announcement application of the relevant requirements of the standard execution.
4 authentication mode
Basic authentication mode embodiment of the present Rules, corporate integrity is the production of self-discipline, effective management,
Stable production premise, based on the product's features and security risks inherent manufacturers generally use raw
Production processes to determine the authentication mode.
The certification body shall "compulsory product certification and implementation rules production enterprise management, certification
Mode selection and determination "requirement for manufacturers to implement category management, category management combined with results
Increase authentication feature based on the basic authentication mode to determine the applicable certification clients can recognize
Card mode.
Basic Mode: type testing Initial factory inspection (corporate quality assurance and product consistency
Check) certified after supervision
Motorcycle production enterprises quality assurance and product consistency check conformity of production according to inspection
Manner;
Certified as a follow-up examination after supervision mode after granting the certificate, production or port-site inspection or sampling
Charles, market sampling test or inspection in one of three ways, or various combinations thereof.
5 certified application unit
In principle, the motorcycle in accordance with the authentication unit for authentication delegation, the same commission of the certification unit
The vehicle shall comply with the "variant" conditions.
Certification means the principal basis for dividing principles for certification commission.
Authentication unit division 2 "Motorcycle Compulsory Product Certification Unit Division" in the annex.
6 for Certification
6.1 certification commission proposed and accepted
Certification principal needs in an appropriate manner to the commission for accreditation certification body. The certification body shall
Certification can be reviewed and certified in accordance with the Regulations of the deadlines or not subject to feedback received
Management information.
Certification principal should be able to assume legal liability related to the quality and the recall, three bags and the like.
The certified motorcycle producers and manufacturers should be able to normal production, and in line with national
Home laws and regulations, otherwise inadmissible certification bodies relevant certification commission.
6.2 Information for Certification
The certification body should be based on laws, regulations, standards and certification and implementation of the necessary implementing regulations certification
Clear the certified list of information shall include at least the present Regulations Appendix 3 "certification commission information" requested
content.
Certification Certification principal shall provide the information requested details of delegate lists.
The certification body responsible for the review, management, conservation, confidential information, and sends the data to inform the assessment results
Authentication principal.
6.3 Implementation Arrangements
The certification body and certification should be the principal sides agreed to implement all aspects of the relevant certification and responsibility
Arrangement, and according to their actual production and management of classification, according to the rules and implementation of certification rules
Requirements, determine the authentication implementation of specific programs and inform the client authentication. Authentication package should be at least
Including type testing requirements for initial factory inspection requirements (when applicable).
7 Certification
7.1 Type tests
7.1.1 Type test program
The certification body should develop during the information after examination type test program, and inform the client authentication.
Type test program includes all the requirements and the number of samples, testing standards for type testing project,
Laboratory information.
CNCA certification clients in the specified range can choose laboratory test program
Develop certification should consult the principal opinion.
7.1.2 Type test sample request
Under normal circumstances, according to the principal type test certification program required to prepare the sample to a specified real
Laboratory; if necessary, according to their actual production and management of classification, according to the certification body type test
Site sampling inspection plan calls for a way to obtain a sample and sent to designated laboratories.
Select the sample project to test whether the model for the same type of decision rules can be determined to be the same
A type of item can be selected a sample; can not be determined for the same type of projects should be selected separately like
Test sample products, integration of all test items corresponding to determine the total number of samples and requirements.
Certification principal shall ensure that the sample provided by the actual production of its products consistent with the certification body
And/or laboratory samples should provide the authenticity of the authentication client for review. Laboratory samples
Authenticity of doubt, it should explain the situation to the certification body, and make the appropriate treatment.
The certification body shall be in accordance with relevant provisions of the documents issued by the CNCA , certification implementing rules
Clear products are key raw materials and spare parts inventory can be accepted and mandatory and voluntary product
Conditions and specific requirements of the type certificate or test report.
7.1.3 Type test project and requirements
CB laboratory in conjunction with the provisions of this rule, combined with the certification commission and the principal vehicle
Vehicle testing standards based on vehicle type, structure and technical parameters to confirm the pilot project, the same car
Different types of goods vehicles under the required additional testing on differences. The rules of the pilot project and based on the test
1 "according to the standard type of pilot projects and" Annex.
For the time due to technological progress, or vehicle related systems, parts and components using the new design, new technology,
Producers and/or vehicle manufacturer shall provide to meet the relevant safety standards validation results, certified by the machine
When structure determination involves significant safety, environmental protection and other projects, the resolution needed by technical experts.
Implementation 7.1.4 type testing
Type test should confirm that the CB certification application materials submitted meet the requirements of the client and
After the development of pilot programs conducted. By the state commission designated laboratory accreditation bodies should be entrusted to sample
Product type testing.
Laboratory type testing samples, should ensure that the detection conclusion is true, accurate, full-detection
Process to make a complete record and archive retained to ensure that the testing process and results records have traceability
Sex.
If the pilot project failed, allowing unqualified after rectification causes analysis, whole
Re-test after the change is complete. If students re-test, the laboratory shall test certification briefing
Agency, reconfirmed pilot program by the certification body.
Conformity assessment system for the recognition of other test results by a certification body in implementing regulations fine
Of the relevant requirements.
As manufacturers have "compulsory product certification and implementation rules and other manufacturers testing resources
Detection condition requires the use of "certification results and certification standards, the certification body can use the production
Detection implement enterprise resource production site sampling (or witness detection) by a designated laboratory
With a test report. The certification body should be clear and specific requirements and certification procedures in implementing regulations.
7.1.5 Type test report
The certification body should specify a uniform type test report format.
After the type test, the laboratory shall inform the certification body type test certification issued by the principal
Inspection report. The test report shall include within the application unit related to certification and product description information. Certification
The Client shall ensure that in the follow-up inspection and certification bodies to be able to provide a complete and effective law enforcement agencies
Type test report.
7.2 Initial factory inspection
Initial factory inspection certification bodies to determine the production capacity of enterprise quality assurance, product consistency
Standards compliance and control on-site inspection and evaluation can meet the certification requirements undertaken.
Initial factory inspection should be carried out after the type test according to type testing and initial work
Factory inspection can be performed simultaneously.
7.2.1 Basic Principles
4 "production conformity inspection requirements," the producers and manufacturers of these rules shall be established in Annex, real
Shi and maintain the enterprise product consistency and standards compliance control system to ensure that certified products hold
Continued to meet certification requirements.
The certification body shall "compulsory product certification and implementation rules factory quality assurance capability requirements"
And "mandatory product certification and implementation rules factory inspection General requirements" General requirements for the development of motorcycle Students
Agribusiness factory inspection implementation rules to ensure that the factory inspection requirements in place. Check shall cover production
Enterprises commissioned the production site certified products. If necessary, the certification body may be beyond the company's field
The implementation of extended inspections.
Initial factory inspection should be completed within one year on principle after type test, or should re-enter
Line type test.
7.2.2 factory inspection
Press plans to review the conformity of production control production consistency factory site inspection manner.
7.2.2.1 Conformity of Production Control Plan review
Producer or manufacturer shall present Regulations Appendix 4 "production conformity inspection requirements" to develop production
Consistency control plan, and submit the certification body for review. The certification body shall review the results to
enterprise.
When the conformity of production control plan to meet these rules Annex 4 to review the conformity of production requirements,
Conformity of production control plan under review by. If the certification body that the conformity of production control plan exist
In defect, the producer or manufacturer shall submit rectification and re-certification body re-examined after the trial
Search results to the client authentication.
If the CB and the producer or the manufacturer for conformity of production control plan can not agree,
Producers or production companies agreed to cooperate and ensure the follow-up Certification Body for product sampling test review
Under the premise of the certification body accepted the manufacturer's conformity of production control plan.
After the conformity of production control plan developed by the producer or producers under review by the certification body
Its preparation of production consistency check (factory site inspection) according to the program, the program should include inspection of production
Product, site and scope.
7.2.2.2 checking conformity of production on the factory floor
The certification body should be in the type test and conformity of production control plan passing the examination, delegate
A national compulsory product certification inspector registration qualifications composition of inspection teams, production enterprises
Production site inspection consistency checking.
Inspection, the company should have certified products in production.
7.2.3 Structure and technical parameter checking and inspection
In the factory site inspection, certification bodies can refer to this rule requirements of Annex 4 of Appendix 1 to extract
A corresponding number of product certification commission, with the vehicle structure and the technical parameters of the declared consistency check.
Related content vehicle products of the parts, assembly systems or logo on the products and components should CCC
Technical data structure consistent with the certificate or the certification body record.
7.2.4 factory inspection results
Factory inspection found no unqualified items, check the result is qualified;
Factory inspection presence of non-conformance, to allow the certification body will take appropriate corrective manner
Results confirm. Rectification time can not be more than three months, if not complete overdue rectification, or the rectification
Negative results, the test results failed.
Factory inspection found that the conformity of production control plan and the implementation of the declaration and inspection approval
Conformity of production control plan serious deviation, or structural and technical parameters and the actual production of the vehicle
Those of samples differ materially consistency, test results fail, terminate the inspection.
7.2.5 factory inspection time
Factory inspection in accordance with relevant state regulations by the certification body, and out in the implementing regulations
Indeed.
7.3 Admissibility of the relevant certification results
For compulsory product certification has been recognized by the national commission or voluntary product certification means,
Assembly, only confirm the loading of components, assembly of standard models of the certificate and the certificate of conformity
Effectiveness, without attendant sample test or factory inspection chase.
7.4 Evaluation and Certification decisions
The certification body of type testing, initial factory inspection results and relevant data/information Comprehensive Review
Price, evaluated by press unit issuance of the certificates; evaluation is not passed, the authentication is terminated.
7.5 Time frame for certification
The certification body shall limit certification to make clear that all sectors, and to ensure that related work on time
Limit required to complete Authentication Client shall actively cooperate in certification activities. Under normal circumstances, since the subject
Management certification from the commission to the authentication certificate issued by the client within 90 days.
8 certified after supervision
Follow-up inspection means supervision of certification bodies and manufacturers certified product implementation.
The certification body should be combined with the production of enterprise management and the actual situation, out in the Certification Conditions
After really up inspection requirements for specific mode selection.
Follow-up examination after 8.1 certified
Follow-up inspection principles 8.1.1 Follow-up inspection
The certification body should be based on the classified management, the certified products and their manufacturers to implement effective
The follow-up inspection to verify the manufacturer's quality assurance ability to continue to meet the certification requirements to ensure that eligible
Certified products consistently meet standard requirements and to maintain consistency with the type test sample.
Follow-up inspection Follow-up inspection should be carried out in the production of normal production. For non-continuous production
Product certification body Certification principal shall submit production plans, to facilitate follow-up inspection Follow-up inspection
The effective implementation.
Tracking check the contents 8.1.2 Follow-up inspection
Under the certification body should ensure that the principles of risk control certification in accordance with Annex 4, followed by the development of certified
The specific content of track inspection requirements, and to be clear in certification implementation details.
8.2 production site sample or to check
8.2.1 production site inspection or sample detection principle
Take production site inspection or sample detection mode after the implementation of follow-up inspection, the certification committee
Trustee, producers, production companies should cooperate.
8.2.2 production site sample or to check the contents
The certification body should develop production site in the Regulations in accordance with the classification principles enterprise and product characteristics
Sampling or to check the content and requirements, and to develop according to their specific sampling and testing program, designated
Personnel in production of qualified products (including production line, warehouse or port, etc.) sample. Sample
Products can be used to detect manufacturer testing resources, conditions and requirements of this rule 7.1.4 with provisions.
8.3 Market sampling test or inspection
8.3.1 Market sampling test or inspection principle
Take market sampling test or examination embodiment supervision of certified clients, producers,
Manufacturers should be with, and confirmation samples taken from the market.
8.3.2 Market sampling test or check the contents
The certification body should develop market sampling or to check the content and requirements of the Regulations.
Certification bodies to develop sampling scheme based on product characteristics, the designated person in the market (including
Offices and other users or OEMs) certified products in samples taken by the sampling plan.
8.4 Application of Quality Information
Enterprises should establish a customer complaints information collection, compilation, analysis, preservation systems, and to ensure full
Complaint information to the certification authority public user may not conceal information and destruction of customer complaints. CB
When the rear license supervision should be user complaints, social attention, quality defects investigation, risk warning,
Content major quality accidents, supervision and inspection, special inspection and other quality information relates to the requirements of this rule
As an important input. The certification body shall ensure that the competent authorities in addition to the certification report shall not to third parties
User enterprise information leak complaints. The certification body shall establish this rule relates to vehicle safety, environmental protection,
User energy efficiency, security and other projects related complaints and other quality information gathering, processing, feedback system
And related programs, in order to strengthen the supervision of certified companies and products to meet the information needs government
Seeking to promote the certification results credible. The certification body shall comply with the requirements of the certification General information provided.
8.5 Frequency and time of follow-up inspection
The certification body should be based on the classified management of different types of production enterprises to adopt different
Supervision after inspection frequency to determine a reasonable time supervision, specific principles should be certified in the implementing regulations
clear.
8.6 Supervision after inspection records
The certification body should be properly recorded on the whole process of follow-up inspection and archive retained to ensure
Certification process and results traceable.
8.7 Evaluation of the results of follow-up inspection
On the follow-up examination after granting the certificate is found non-conformities corrective actions should be completed within three months,
Otherwise, without follow-up examination.
Conclusion on CB track inspections, and for drawing conclusions about the data sample testing or inspection /
Information evaluated by a comprehensive evaluation, we can continue to maintain certification, the use of certification marks.;
Evaluation is not adopted, the certification body should be made according to the respective circumstances suspend or revoke certificates
Processed and made public.
8.8 Consistency Parameter Management
The certification body shall consistency vehicle classification parameters and dynamic management, the situation changes according to the parameters
Product safety and quality determine the status of risk that may be involved and make a timely manner as needed to recover factory inspection,
Increase sampling and other treatment.
9 Certification
9.1 holding certificates
The certificate is valid for 5 years within the validity period, the validity of the certificate depend on the certification
After the configuration of a certified inspection.
Certificate expiry, the need to continue to use, should be the principal certification certification
10
Before the expiry of accreditation commission 90 days after the last certificate is valid up inspection knot
If qualified, the certification body shall issue a new certificate directly.
Content 9.2 certificates
In addition to meeting certification programs and content "compulsory product certification regulations" requirements, the
Must accompany the certificate issued by the annex, indicating that the certificate relates to products subject to this implementation rule referenced standards
And the name of the certification and implementation rules, numbered for changing the version number of the certificate shall indicate the change to the Ming
The number of changes of the product display correctly.
Related content vehicle products of the parts, assembly systems or logo on the products and components should CCC
Technical data structure consistent with the certificate or the certification body record.
9.3 Certificate of Change
Follow-up, if the contents of the certificate changes; or the product has been certified technical changes occur
(Design, structural parameters, key components/raw materials, etc.) when the impact of compliance relevant standards; or
Due to the changes planned for conformity of production control, production conditions, etc. may affect the consistency of production;
Or change other matters CB certification implementation rules clearly occurs, the client should be certified
Principal changes made to the certification body, approved certification body, before implementation of the change.
The certification body should require certification specific implementation rules explicitly certification changes, including certification change
More scope and procedures. The certification body should be based on the content of the change, to evaluate the information provided,
Determine whether to approve the change. For samples to detect and/or factory inspection should be detected and/or inspection
After passing the order to approve the change. Sample testing can detect use of the company resources, conditions and requirements
The same rule 7.1.4 clause.
To meet the requirements, approve the change. Issue a new certificate, the new certificate number, valid approval
The principle remains the same date, and indicate the date of the change. Need not issue a new certificate, issued by the change
More confirmation form indicating the changes as well as changes to the date of approval.
Pause 9.4 certificates, cancellation and withdrawal
Suspended certificates, cancellation and withdrawal based on "compulsory product certification regulations," and "strong
Compulsory product certification cancellation, suspension, revocation Implementing Rules "Rules for the Implementation and certification regulations.
The certification body shall establish risk early warning mechanism for certified products, there are significant design flaws when the vehicle
Or safety hazards (eg risk warning, defect investigations, recall, major quality accidents or supervision,
Special inspection found serious non-conformities, etc.), and indeed verified producer responsibility, the certification body
11
Depending on the circumstances and nature may be suspended and revoked certificates.
The certification body shall determine does not meet the certification requirements and the scope of product categories, and take appropriate manner
Be announced by suspension, cancellation and revocation of the certificate.
9.5 Use of certificates
Certification principal shall ensure that the certificates comply with "Regulations for Compulsory Product Certification"
Provisions.
10 certification mark and certificate of conformity of vehicles
Certification mark of the management, use should follow the "Compulsory Certification Mark" Regulation
set.
10.1 Flag Shape
Certified product should be used for car and trailer safety class (S) certification flag pattern as shown below:
10.2 logo Gasch
Products covered by this rule are not allowed to use any derivation of certification mark.
You can use standard-size marks, printing on the nameplate or molding in any of three ways.
When using molding or nameplate printing certification mark, the mark should indicate the product suitable place around
The factory code.
10.3 vehicle certificate of conformity
Producer or manufacturer of the vehicle shall rule requires conformance certificate recognized patterns and parameters submitted
Certification body. Style, content-related requirements and parameters of the vehicle conformance certificate in Annex 5 "consistent vehicle
Certificate of COC ". Each one comes with vehicle traffic will be certified in conformance certificate lorry file to the
12
Consumers express certification or relevant product information and fuel consumption and environmental indicators.
11 charges
Certification fees, by the certification body in accordance with national compulsory product certification on charges of
Prescribed fee.
The certification body shall be in accordance with national mandatory product certification fees on the initial factory inspection,
Follow-up inspection to review the provisions of the standard charge man-days to determine a reasonable fee man-days.
12 certification responsibilities
The certification body should be responsible for the certification results.
The laboratory shall be responsible for test results and test reports.
Certification bodies and their appointed Inspectors shall be responsible for the factory inspection.
Principal certification certification commission submitted information authenticity, legitimacy.
13 Certification Rules
The certification body should be based on the principles and implementation of the requirements of this rule, the development of scientific, reasonable and operable
Certification implementation details. Certification rules shall be announced after the implementation of the national commission for the record.
Certification rules shall include at least the following:
(1) certification process and deadlines;
(2) authentication mode selection and related requirements;
(3) the production of enterprise management requirements;
(4) Data for Certification and requirements;
(5) sample testing requirements (including the production site or market sampling or testing requirements);
(6) Initial factory inspection requirements;
(7) Follow-up inspection requirements;
(8) the use of company resources to implement the testing requirements and the use of other authentication result;
(9) Certification change (including standard version) requirements;
(10) and the list of critical raw materials, spare parts and related requirements;
(11) on the basis of fees and requirements;
13
(12) and technical disputes, complaints related processes and deadlines.
14
Annex 1: According to the standard type of pilot projects and
1, according to the standard
GB 7258 Safety requirements for operation of motor vehicles
GB 21861 motor vehicle safety inspection items and methods
GB 16735 Road vehicles - Vehicle identification number (VIN)
GB 16737 Road vehicles - World manufacturer identifier (WMI)
GB 14023 Vehicles, boats and internal combustion engines - Radio disturbance characteristics Limits and methods of measurement for the protection of the vehicle receiver
GB/T 18387 Limits and methods of measurement of broadband electromagnetic radiation intensity of the electric vehicle 9kHz ~ 30MHz
GB 14621 motorcycles and exhaust emission limits and measurement methods (two-speed idle)
GB 14622 motorcycle emission limits and measurement methods (case law, China stage Ⅲ)
GB 18176 mopeds emission limits and measurement methods (case law, China stage Ⅲ)
Emission limits and measurement methods GB 20998 motorcycles and fuel evaporation
GB 15744 Motorcycle Fuel Consumption Limits and methods of measurement
GB 16486 mopeds Fuel Consumption Limits and methods of measurement
GB/T 24157 electric motorcycles and electric mopeds energy consumption and continued driving mileage test method
GB 20073 motorcycles and braking performance requirements and test methods
GB 16169 motorcycles and accelerated with noise limits and test methods
GB 4569 Motorcycles and Mopeds noise limits and measurement methods
Graphic GB 15365 motorcycle controls, instructions and signal device symbol
GB 17353 motorcycles and steering lock anti-theft device
GB 20074 motorcycles and external projections
GB 20075 motorcycle occupant armrest
Installation instructions GB 18100.1 motorcycle lighting and light signaling devices - Part 1 motorcycle
Installation instructions GB 18100.2 motorcycle lighting and light signaling devices - Part 2 two mopeds
Installation instructions GB 18100.3 motorcycle lighting and light signaling devices - Part 3: three-wheeled motorcycle
GB 17352 motorcycles and mopeds mirrors the performance and installation requirements
Indirect field of vision means the performance of motor vehicles GB 15084 and installation requirements
Performance requirements and test methods GB 15742 vehicles with the speaker
GB 24155 electric motorcycles and electric moped safety requirements
GB 19482 motorcycles and fuel tank safety requirements and test methods
15
GB 5948 motorcycle incandescent filament light headlamp performance
GB 19152 moped headlamp performance
GB 17510 Motorcycle light signaling devices for optical performance
GB 11554 vehicles and trailers with rear fog light performance
GB 11564 vehicles retro-reflector
GB 16897 brake hose structure, performance requirements and test methods
GB 9656 automotive safety glass
GB 518 motorcycle tires
GB/T 20076 motorcycles and mopeds the maximum torque and maximum net power measurement method
16
2, the type of pilot projects and requirements
1 Vehicle Identification Number (VIN): VIN shall comply with the provisions of GB 16735 and GB 16737.
2 vehicle mark: should comply with GB 7258 4.1.1, 4.1.2, 4.1.3, 4.1.4.
3 motorcycle outside dimensions: GB 7258 shall comply with the provisions in 4.2.
4 parking performance: should conform to GB 7258 in 4.7.4, the provisions of 7.10.4.
5 steering system: should conform to GB 7258 6.1, 6.2, 6.4, 6.6 provisions, 6.7, 6.13.
6. The steering shaft axle load ratio: shall comply with the provisions in 4.5.1.2 of GB 7258.
7 security guards: should comply with GB 7258 in 12.2.1, 12.2.2, 12.2.5, 12.2.6, 12.3, 12.5, 12.13.7
Provisions.
8 vehicle headlamp beam irradiation position and luminous intensity: should comply with GB 7258 in 8.5.1, 8.5.2, 8.5.3.1, 8.5.3.3
Provisions in accordance with the provisions of GB 21861 of the test.
9. Number of passengers authorized: 4.5.5 should be consistent with the GB 7258, the provisions of 11.6.10.
10. The speedometer indicates the error value: GB 7258 shall comply with the provisions of 4.12, and tested in accordance with the provisions of GB 21861.
11. Vehicle speed is limited maximum speed: GB 7258 shall comply with the provisions in 10.6.
12. The three-wheeled vehicles vehicle curb weight: 3.5 GB 7258 shall comply with the provisions.
13. Stable Roll Angle: GB 7258 shall comply with the relevant provisions in 4.7.3.
14. radio disturbance characteristics: shall comply with the provisions of GB 14023 and/or GB/T 18387 of.
15. Exhaust emissions: shall comply with GB 14621, GB 14622, GB 18176's.
16. Fuel Evaporation: shall comply with the provisions of GB 20998.
17. Fuel consumption: shall comply with the provisions of GB 15744 or GB 16486.
18. The electric energy consumption and motorcycle driving range: shall comply with GB/T 24157 of.
19. The braking performance: should conform to the provisions of GB 20073.
20. Acceleration noise: shall comply with the provisions of GB 16169.
21. The set-noise: it shall comply with the provisions of GB 4569.
22. controls, graphic indicators and signaling devices Symbol: GB 15365 shall be required to set and comply with its provisions.
23. The steering lock anti-theft device: should comply with the provisions of GB 17353.
24. External projections requirements: comply with the requirements of GB 20074.
25. crew motorcycle armrest: shall comply with the provisions of GB 20075.
26. Installation of lighting and light signaling devices: shall comply with GB 18100.1, GB 18100.2, GB 18100.3 requirements.
27. Mirrors and installation requirements: body part or all of the closed driver's vehicle shall comply with the provisions of GB 15084, and other products
Product should comply with the provisions of GB 17352.
17
28. Speaker and installation requirements: comply with the requirements in 8.6.1 of GB 7258 and GB 15742 3.1.1, 3.1.2, 3.1.3,
4.1.2 regulations.
29. The electric drive motorcycle safety requirements: shall comply with the provisions of GB 24155.
30. The fuel tank safety performance requirements: comply with the requirements of GB 19482.
31. headlamp performance: should conform to GB 5948, the provisions of GB 19152.
32. Optical properties of light signaling devices: after three-wheeled motorcycle fog lamp shall comply with the provisions of GB 11554, and other products should be consistent with GB
17510.
33. A retro-reflector: shall comply with the provisions of GB 11564.
34. The brake hose: shall comply with the provisions of GB 16897.
35. The motorcycle tire: GB 518 shall comply with 4.1, 4.2.1, 4.2.2, 4.2.3, 4.3, 4.4.1, 6 regulations.
36. Windshield: windshield of the vehicle shall comply with the provisions of GB 9656.
37. The maximum torque and maximum net engine power: Motorcycle engine maximum torque and maximum net power shall comply with GB/T 20076 Article
The relevant provisions of 6.1.
18
Annex 2: Motorcycles compulsory certification application unit
In the certificate management process, applying the same vehicle unit shall comply with "Vehicle type", "variant" and "variant" in the "variant"
conditions of.
1 "Vehicle type"
Refers to a car, but also a group of vehicles (variants) which:
(A) of the same type (L1, L2, L3, L4, L5);
(B) produced by the same manufacturer;
(C) have the same fixing member main chassis, frame, sub-frame, or base plate have the same configuration is used;
(D) have the same working principle of the power unit (internal combustion type, electric, hybrid, etc.);
(E) with a producer (manufacturer) given the same type name.
The same type of vehicle may include its "variant" and "variant";
1.1 "variant"
It refers to a car, but also refers to a group of the same type of car (modified), which:
(A) the same form of the vehicle (basic characteristics);
(B) in a group of vehicles (modified), the difference between the maximum and minimum vehicle curb weight does not exceed 20% of the minimum;
(C) in a group of vehicles (modified), the maximum allowable total vehicle mass difference between the maximum and minimum value does not exceed 20% of the minimum;
(D) have the same duty cycle and light the way (two or four stroke, spark ignition or compression ignition);
(E) in a group of vehicles (modification), the vehicle power unit (if it is an internal combustion unit) of the cylinder of the minimum and maximum working capacity
Difference does not exceed 30% of the minimum;
The same as (f) the number and arrangement of cylinders;
(G) in a group of vehicles (modification), the vehicle power unit output power difference between the maximum value and the minimum value of not more than 30% of the minimum;
(H) the same mode of operation of the motor (electric motorcycle);
(I) the same type of gearbox (manual type, automatic type, etc.);
1.2 "retrofit"
Refer to the same type of car and its variants, it may contain any device information documents Appendix 1 to Annex 1 listed
Components or systems, but should meet the following conditions:
(A) The following indexes are the same:
(I) vehicle curb weight;
(Ii) the maximum total mass;
Output power (iii) of the power unit;
(Iv) the cylinder capacity of the power unit;
19
and
(B) the same noise, emissions test results;
20
Annex 3: Information commission of the certification
First, the principal certification, the producer (manufacturer), the manufacturer (factory) Basic information
1. certified power of attorney or contract;
2. Certification principal/producer (manufacturer)/business registration certificate factory, organization code certificate (within the enterprise);
3. The principal is a seller, when importers are required to submit sales contracts and associated producers, importers and producers made deputy
The (first application and change).;
4. factory inspection questionnaire;
Second, product certification information
1. Motorcycle product structure and technical parameters (Annex 1 of this Appendix, the first application and parameters are changed)
2. Conformity of Production control plan (first application and plans are changed)
2.1 Production Control Plan Implementation Report consistency (after inspection per year)
3. Model series, unit and vehicle model preparation instructions of the vehicle. The description should be specific to each vehicle type and the corresponding distinction
Parameter index (the first application and change the vehicle model range, unit, when the vehicle model).;
4. VIN Rules for the compilation description. The description should be specific to each one (or each indivisible combination) may use
The symbols and their corresponding technical vehicle information (VIN first application and preparation of the rules change when).;
5. Business models applied to distinguish the external identification information of the vehicle (for each model series, the first application and change);
Third, the client must provide the above information is true and bear the corresponding legal responsibility (including "three guarantees", "recall" and related quality of responsibility) commitments
Connaught letter.
twenty one
Appendix 1: motorcycle product structure and technical parameters
Number Fill in Chinese legend
A class parameter
(Changes
Variable to be submitted
More applications
parameter)
A. Motorcycle product structure and technical parameters
General 0
0.1 Trademarks and factory mark
Full official trademark registration book content approval, use of a trademark shall
It contains copies of motorcycle products, and provide trademark registration certificates of trademark certificate
Copies can be provided in the first involving the use of this trademark
0.1.1 Chinese trademark: A trademark fill in Chinese
0.1.2 English trademark: Fill English trademark may be phonetic, use half-width characters A
0.1.3 figurative mark: If you can upload Annex A
0.1.4 Chinese factory standard: You must fill in the absence of factory standard .A trademark
English 0.1.5 factory mark: You must fill in the absence of factory standard .A trademark
0.2 Style Name: the four letters or numbers (\\ \\ except O Q I), as defined by the enterprise, requiring
The model series discontinued within five years may not re-use code.
0.2.1 Commercial name (eg
Have)
: Popular name for selling and use, such as: large sheep, Hammer and other names.
0.2.2 Product Type: Domestic enterprises Reference Standard: GB/T 5375-2006 to develop, foreign enterprises custom,
There may be commercial name.
0.2.3 Product Name: Select (two moped, electric mopeds, hybrid (electric)
Moped, scooter type two mopeds, three-wheeled mopeds,
Motorcycles, electric motorcycles, hybrid (electric) scooter, pedal
Type motorcycle, sidecar motorcycles, three-wheeled motorcycles, electric two friction
Motorcycle, electric three-wheeled motorcycles, electric two mopeds, electric Shozo
Wheel mopeds, two motorcycles)
Model 0.3 standard
Identification method
: Such as: the use of the body in the form of decals, nameplates punched form; or see the pattern.
0.3.1 Model standard
Location identification
: Such as: the fuel tank and the outer plate, nameplate; or see the pattern.
0.4 Vehicle Category: L1 two mopeds, L2 three mopeds, L3 motorcycles, L4
Sidecar, L5 three-wheeled motorcycles, electric motorcycles and electric mopeds by
According to the number and arrangement of the wheels were classified, classified L1 ~ L5. Reference Standard GB/T
15089.
0.5 Manufacturer's name: the name of whichever business license .A
0.5.1 Manufacturer's Address: Address to prevail .A real business address
0.5.2 the name of the company
: In the name of the business license shall prevail.
0.5.3 production enterprises to
: Address to the address from actual production.
twenty two
0.6 Agency Name: The name of the business license to prevail.
0.6.1 Agency Address: Address to the actual business address prevail.
Complete frame Figure 0.7: Upload attachment pattern 02.
0.7.0 Frame Manufacturer: Name of whichever business license .A
0.7.0.1 Frame manufacturer
the address of
: Address to the address from actual production.
0.7.1 Vehicle identification code
(VIN before 8)
For single member and 0.8
Independent technical assembly,
Type-approval mark
The location and fixing
the way*
: You can not fill, or a list of instructions.
0.9 CCC Application No:
0.10 Principal Name:
0.10.1 client's address:
0.11 unit code: Fill in CCC Certificate No. initial declaration fill out an application number.
0.12 factory number: Fill in the company plant number
0.13 Vehicle Manufacturing country:
The overall structure of the vehicle 1
1.1 typical vehicle photo
(Front left 45 °
Rear right 45 °)
: Pattern number 00, when it comes to appearance changes, such as changes in the shape of the mirror, according to
Mingguang signal shape changes, exhaust muffler shape changes, brake drums
Change disc type, multi trademark model, the caption should be sufficiently different.
1.2 feet complete vehicle
Inch Figure
: See pattern 01.
1.2.1 length (mm): Fill integer A
1.2.2 Width (mm): Fill integer A
1.2.3 height (mm): Fill integer A
1.2.4 Wheelbase (mm): Fill integer A
1.2.5 Tread (mm): Fill integer A
1.3 The number of axles: two axle shaft to a calculation .A
1.3.1 Number of wheels: A
1.4 Minimum ground clearance
(Mm)
: Enter an integer
1.5 Engine location
And arrangement
: You can refer to the pattern 00 photos, drawings or 01.
1.6 Number of seats: including the driver's seat .A
1.7 driving position
about*
: Three-wheeled motorcycle, as the case may be.
Press the right side of the vehicle 1.7.1 /
The left with equipment
2 mass
twenty three
2.0 vehicle dry mass
(Kg)
: Description Reference GB/T 5359.5, GB/T 5359.6, GB 14622 requirements to fill.
Fill integer
2.1 vehicle curb weight
(Kg)
: Description Reference GB/T 5359.5, GB/T 5359.6, GB 14622 requirements to fill.
Fill integer
2.1.1 vehicle curb weight
Assigned each axis
Assigned each axis
(Kg)
Note: the sum of the mass is consistent with 2.1.
2.1.1.1 vehicle curb weight
Front axle sub
Hotels (kg)
: Enter an integer
2.1.1.2 vehicle curb weight
In the rear axle sub
Hotels (kg)
: Enter an integer
2.1.1.3 vehicle curb weight
In the sidecar axle
Distribution (kg)
: Enter an integer
2.2 Reference mass (kg): vehicle curb weight 75kg, integer A
2.2.1 in the reference quality
Distribution shaft (kg)
Note that the sum of the mass is consistent with 2.2.
2.2.1.1 reference quality front
Distribution hub
(Kg)
: Enter an integer
2.2.1.2 After the reference quality
Distribution hub
(Kg)
: Enter an integer
2.2.1.3 reference quality in the side
Distribution vehicle axle
(Kg)
: Enter an integer
2.3 factory set maximum total mass
Amount (kg)
: Description Reference GB/T 5359.5, GB/T 5359.6, GB 14622 requirements to fill.
Fill integer
2.3.1 Factory set maximum total mass
The amount of points for each axis
Note that the sum of the mass is consistent with 2.3.
2.3.1.1 plant given a maximum total mass
The amount of the front axle
Distribution (kg)
: Enter an integer
2.3.1.2 plant given a maximum total mass
The amount of the rear axle
Distribution (kg)
: En......
Related standard:   CNCA C11-01-2014  CNCA C11-03-2014
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2019