|
US$559.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
CNCA C05-01-2014: China Compulsory Certification Implementation Rules - Power Tools
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | PDF |
| CNCA C05-01-2014 | English | 559 |
Add to Cart
|
3 days [Need to translate]
|
China Compulsory Certification Implementation Rules - Power Tools
| |
CNCA C05-01-2014
|
PDF similar to CNCA C05-01-2014
Standard similar to CNCA C05-01-2014 GB/T 4343.2 GB/T 3883.311 GB/T 3787 Basic data | Standard ID | CNCA C05-01-2014 (CNCA-C05-01-2014) | | Description (Translated English) | China Compulsory Certification Implementation Rules - Power Tools | | Sector / Industry | China Compulsory Certification (CCC) Implementation Rules | | Classification of Chinese Standard | K64 | | Classification of International Standard | CNCA Announcement No. 23 of 2014 | | Word Count Estimation | 16,124 | | Date of Issue | 7/16/2014 | | Date of Implementation | 9/1/2014 | | Older Standard (superseded by this standard) | CNCA 01C-014-2007 | | Regulation (derived from) | CNCA Announcement No. 23 of 2014 | | Issuing agency(ies) | China National Accreditation Administration for Certification and Accreditation | | Summary | This standard specifies the China Compulsory Certification (CCC) implementation rules for Power Tools. This standard defines the Power Tools's certification unit; certification entrusting; document requirements; sample requirements; certification procedur | CNCA C05-01-2014: China Compulsory Certification Implementation Rules - Power Tools---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
China Compulsory Certification Implementation Rules-Power Tools
0 Preface
This rule is based on the safety risks and certification risks of power tools
It has the basic principles and requirements for implementing compulsory product certification.
These rules are issued with the State Accreditation Administration
Implementation Rules for Compulsory Product Certification
Industry classification management, certification mode selection and determination ",
The use of testing resources and other certification results of manufacturing enterprises "," Implementation Regulations for Compulsory Product Certification
Then general inspection rules such as the General Requirements for Factory Inspection
The certification body shall compile the implementation rules for certification in accordance with the general implementation rules and the requirements of these rules,
And supporting the common implementation rules and these rules jointly implemented.
Manufacturers should ensure that the certified products produced can continue to meet the certification and applicable standards
Standard requirements.
1 Application
This rule applies to hand-held power tools, including the following product categories. screwdrivers and
Impact wrenches; grinders, polishers and disc sanders; non-disc sanders and polishers;
Circular saws; Electric and impact drills; Hammer tools; Electric scissors and punching shears; Tapping machines; Electric planers;
Reciprocating saw (jigsaw, knife saw); concrete vibrator; non-flammable liquid electric spray gun; chain saw;
Pruning shears; wood milling and trimming machines; stone cutting machines.
This rule does not apply to battery-powered electric tools covered by Appendix K of GB 3883.1.
Changes due to factors such as laws and regulations or related product standards, technology, and industrial policies
The resulting adjustment of the scope of application shall be subject to the announcement issued by the CNCA .
2 Certification standards
Certification standards
Product Type
Safety standards EMC standards
GB 3883.1
GB 3883.2
GB 4343.1
GB 17625.1
Electric screwdriver and impact wrench
GB 3883.1
GB 3883.3
GB 4343.1
GB 17625.1
Electric grinder 2
Sander 3 GB 3883.1 GB 4343.1
Combined classification management results based on the basic certification model to increase corporate quality assurance capabilities as appropriate
Relevant factors such as the inspection of the strength and product consistency (initial factory inspection),
The methods are combined to determine the authentication mode applicable to the authentication principal.
4 Certification unit division
In principle, it should be determined according to the product category, motor type, rated voltage level, motor
Different division application units for rotor punch size, safety structure, etc. Same producer, different
The same product produced by the production enterprise, or the same product produced by different producers and the same production enterprise
Product, type test can be performed on only one unit sample, other manufacturers/production
The author's product needs to provide information for consistency check.
The certification body shall, in accordance with the relevant regulations issued by the CNCA , combine the production enterprises
Classified management, specific requirements for unit division in the detailed implementation rules of certification.
5 Certification Commission
5.1 Proposal and Acceptance of Certification Commission
The certification client needs to submit a certification commission to the certification body in an appropriate manner.
The certification entrustment shall be processed, and feedback shall be accepted in accordance with the time limit requirements in the implementation details of certification.
Or inadmissible information.
Certification institutions shall not accept applications that do not meet the requirements of national laws and regulations and relevant industrial policies
Relevant certification commission.
5.2 Application Information
The certification body shall perform detailed certification implementation in accordance with laws, regulations, standards and certification implementation requirements.
A clear list of application materials (including at least an application or contract for certification, the client of certification
/ Producer/producer registration certificate, etc.).
The implementation of certification does not involve the company's quality assurance capabilities and product consistency checks (initial
Factory inspection), the certification body may also require the certification client to submit a copy of the
Self-assessment report on the quality assurance ability of the manufacturer.
The certification client shall provide the required information in accordance with the requirements of the application information list in the certification implementation rules.
data. The certification body is responsible for reviewing, managing, preserving, and maintaining relevant information,
The verification result is notified to the client.
5.3 Implementation arrangements
The certification body shall agree with the certification client on the relevant
Responsibilities and arrangements, and according to the actual and classified management of the production enterprise,
The detailed requirements of the implementation of certification, determine the specific implementation of certification and inform the certification client.
6 Certification implementation
6.1 Type test
6.1.1 Type test plan
The certification body shall formulate a type test plan after conducting the data review and inform the certification committee
Trustee
The type test plan includes all the sample requirements and quantities for the type test, and the test standard items.
Project, laboratory information, etc.
6.1.2 Type test sample requirements
The certification body shall specify the relevant requirements for sample/sampling of certified products in the detailed implementation rules.
In general, the representative of the type test is selected by the certification client according to the requirements of the certification body.
For testing; if necessary, the certification body can also obtain samples by on-site sampling/sealing
The certification client shall ensure that the samples provided by it are consistent with the actual production products. recognize
The certification body and/or laboratory shall review the authenticity of the samples provided by the certification client. real
If the laboratory has doubts about the authenticity of the sample, it should explain the situation to the certification body and make corresponding
deal with
The certification body shall, in accordance with the relevant regulatory documents issued by the CNCA ,
The list of key components and materials used in the product and related requirements are specified in the rules.
For key components and components within the scope of compulsory product certification acquired in China
Materials, manufacturers should provide compulsory product certification; for non-compulsory product certification
For key components and materials within the scope, the certification body shall clearly define
Conditions and specific requirements for a voluntary certification or type test report accepted or recognized.
6.1.3 Type test items
(1) Safety test items
In principle, all applicable items specified in the product safety standards should be included
(2) Electromagnetic compatibility testing items
In principle, the following applicable items specified in the EMC standards should be included.
-Terminal disturbance voltage
-Disturbance power
Harmonic current
When some testing items in the standard are adjusted, they should be based on the
Related regulations are implemented.
6.1.4 Implementation of type test
In principle, the type test should be completed in a laboratory designated by the CNCA . Laboratory pair
Type test of the sample, make a complete record of the entire testing process and keep it on file to ensure
Prove that the test process and results are traceable.
Without affecting the validity of the certification results, the certification body may
Implementation Rules for Certification Implementation of Use of Testing Resources and Other Certification Results by Production Enterprises
The management procedures shall be adopted, and the testing personnel shall be dispatched by the designated laboratory to utilize
The testing resources carry out testing or sight testing, and the testing report is issued by the designated laboratory. laboratory
The authenticity, correctness and traceability of the test conclusions shall be ensured. Certification body should implement certification
Specific requirements and procedures are specified in the rules.
6.1.5 Type test report
The certification body shall specify a uniform type test report format.
After the type test is completed, the laboratory shall promptly issue a type certificate to the certification body and the client.
Test report. The test report should contain information on all products and certifications in the application unit
description of. The certification client shall ensure that it is able to report
The structure provides effective type test reports.
6.2 Certification evaluation and decision
The certification body comprehensively evaluates the type test conclusions and relevant data/information, and makes
PP
Certification decision. Those who meet the certification requirements shall be issued a certification certificate. For the existence of unqualified conclusions,
The certification body will not approve the certification commission and the certification will be terminated.
6.3 Time limit for certification
The certification body should clearly define the time limit for each link of the certification and ensure related work
Complete as required. The certification client must actively cooperate with the certification activities. generally
In the next 90 days from the date of accepting the certification commission, the certification certificate will be issued to the certification client.
7 Post-certification supervision
Post-certification supervision refers to the supervision performed by certification bodies on certified products and their production enterprises.
The certification body shall combine the classification management and actual situation of the production enterprise,
Specific requirements for the selection of supervision methods after obtaining the certificate.
7.1 Follow-up inspection after certification
7.1.1 Follow-up inspection principles after certification
The certification body shall, on the basis of classified management of production enterprises,
The company implements effective follow-up inspections to verify that the quality assurance capabilities of production companies continue to meet
Certification requirements, ensuring that certified products continue to comply with standard requirements and maintaining
consistency.
The follow-up inspection after the certification shall be given priority to not communicate in advance during the normal production of the production enterprise.
The method is known to the inspected party. For non-continuous production products, the certification client shall
The certification agency submits the relevant production plan to facilitate the effective follow-up inspection after the certification.
7.1.2 Content of follow-up inspection after certification
The certification body shall comply with the Implementation Rules for Compulsory Product Certification
"Requirements" to formulate follow-up inspection requirements after certification, product consistency inspection requirements, quality of production enterprises
The specific content such as the quantity control and testing requirements shall be specified in the detailed implementation rules of the certification.
7.2 Production site sampling samples for testing or inspection
7.2.1 Principles of sampling or testing at the production site
Samples taken at the production site for testing or inspection should cover all certified categories
If the production site takes samples for testing or inspection to implement post-certification supervision,
Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of CNCA C05-01-2014_English be delivered?Answer: Upon your order, we will start to translate CNCA C05-01-2014_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time. Question 2: Can I share the purchased PDF of CNCA C05-01-2014_English with my colleagues?Answer: Yes. The purchased PDF of CNCA C05-01-2014_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to [email protected]. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.
|