YS/T 866-2024 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 866-2024	RFQ	ASK	3 days	(Lead-free tin-based and zinc-based gold-sprayed wire for capacitor end surfaces)	Valid
YS/T 866-2013	439	Add to Cart	3 days	Lead-free tin-based spraying wire for capacitor end face	Obsolete

Basic data

Standard ID: YS/T 866-2024 (YS/T866-2024)
Description (Translated English): (Lead-free tin-based and zinc-based gold-sprayed wire for capacitor end surfaces)
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H62
Classification of International Standard: 77.150.60
Date of Issue: 2024-10-24
Date of Implementation: 2025-05-01
Older Standard (superseded by this standard): YS/T 866-2013
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, accompanying documents and order form contents of lead-free tin-based and zinc-based gold-sprayed wires for the end faces of metallized film capacitors. This standard applies to lead-free tin-based and zinc-based gold-sprayed wires for the end faces of metallized film capacitors.

YS/T 866-2013: Lead-free tin-based spraying wire for capacitor end face

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Lead-free tin-based spraying wire for capacitor end face ICS 77.150.60 H62 People's Republic of China Nonferrous Metals Industry Standard Capacitor with lead-free solder base end surface spray gold Issued on. 2013-04-25 2013-09-01 implementation Ministry of Industry and Information Technology of the People's Republic of China released

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard by the national non-ferrous metals Standardization Technical Committee (SAC/TC243) and focal points. This standard is drafted by. Shaoxing Dragon tin build Limited. The main drafters of this standard. Wear water country, money ruled, Liang Di Hao, phase Yuyan, Peng Zi, Jinliu Jun, Dong Jianguang, Zhou Feng, Zhang Qiang, Dai Dengfeng. Capacitor with lead-free solder base end surface spray gold

1 Scope

This standard specifies the end surface of the capacitor with a lead-free solder wire sprayed gold-based terminology, requirements, test methods, inspection rules, marking, packaging, transport and Storage and quality certificates, contracts (or orders) and so on. This standard applies to the end face of the metal film capacitors sprayed the group with a lead-free solder wire (hereinafter referred to as wire).

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 228.1-2010 metal material tensile test - Part 1. room temperature test methods (ISO 6892-1.2009, MOD) GB/T 351 metal material resistivity measurement method GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch inspection sampling plan GB/T 3260 (all parts), chemical analysis of tin GB/T 8888 heavy non-ferrous metal processing products, packaging, labeling, transportation and storage Determination of GB/T 10574.1 chemical analysis of tin tin content of Determination of GB/T 10574.2 chemical analysis of tin antimony content JY/T 014 General thermal analysis YS/T 746.3 non-Pb-based solder chemical analysis - Part 3. Determination of copper content - Flame atomic absorption spectrometry and Sodium thiosulfate titration YS/T 746.9 without Tin based solders for chemical analysis - Part 9. Determination of zinc content by flame atomic absorption spectrometry and Na2EDTA titration

3 Terms and Definitions

The following terms and definitions apply to this document. 3.1 Film capacitors filmcapacitor Plastic film as a capacitor dielectric. 3.2 Metalized film capacitors metalizedfilmcapacitor In vacuum evaporation manner metals (Al, Zn) thin film capacitor electrode made directly deposited on the film. 3.3 Sprayed gold metalspraying In the end face of the metal film capacitors sprayed metal layer as an electrode, the process of spraying. NOTE. When spraying the metal material by diffusion into the gap between the metal film and in contact with the vapor-deposited metal electrode film on the metal film on the Genus evaporated layer electrode connected to the electrode layer sprayed gold, guarantee two vapor-deposited metal electrode layer and a thin film of gold spray on the good contact, and provide access to wire Contact surfaces. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 866-2024_English be delivered?

Answer: Upon your order, we will start to translate YS/T 866-2024_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 866-2024_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 866-2024_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version YS/T 866-2024?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version YS/T 866-2024 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.