YS/T 768-2011 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
YS/T 768-2011	239	Add to Cart	3 days	Flame atomic absorption spectrometric analysis method of litbium in eledrolyte cryolite	Obsolete

Similar standards

GB/T 7999   YS/T 600   GB/T 14849.2   YS/T 872   YS/T 420   YS/T 739.4   

Basic data

Standard ID: YS/T 768-2011 (YS/T768-2011)
Description (Translated English): Flame atomic absorption spectrometric analysis method of litbium in eledrolyte cryolite
Sector / Industry: Nonferrous Metallurgy Industry Standard (Recommended)
Classification of Chinese Standard: H12
Classification of International Standard: 77.120.10
Word Count Estimation: 6,631
Date of Issue: 2011-12-20
Date of Implementation: 2012-07-01
Regulation (derived from): ?MIIT Announcement 2011 No.43
Issuing agency(ies): Ministry of Industry and Information Technology
Summary: This standard specifies the method for the determination of aluminum electrolyte lithium content. This standard applies to the determination of aluminum electrolyte lithium content. Measuring range of 0. 100% to 3. 00%.

YS/T 768-2011: Flame atomic absorption spectrometric analysis method of litbium in eledrolyte cryolite

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Flame atomic absorption spectrometric analysis method of litbium in eledrolyte cryolite ICS 77.120.10 H12 People's Republic of China Nonferrous Metals Industry Standard Determination of Lithium Content in Aluminum Electrolytes Flame atomic absorption spectrometry 2011-12-20 release 2012-07-01 Implementation Issued by the Ministry of Industry and Information Technology of the People's Republic of China

Foreword

This standard is drafted in accordance with the plan given in GB/T 1.1-2009. This standard is owned by the National Committee for the Standardization of Nonferrous Metals (SAC/TC243). This standard is drafted by China Aluminum Corporation Guizhou Branch. This standard is drafted by Inner Mongolia Huohe Hongjun Aluminum Electricity Co., Ltd. and Shandong Nanshan Aluminum Co., Ltd. The main drafters of this standard. Wang Qian, Wang Baosheng, Fan Qing, Zhong Shihua, Li Zhihui, He Chunyan, Chen Hongjun, Yang Zhenhua. Determination of Lithium Content in Aluminum Electrolytes Flame atomic absorption spectrometry

1 Scope

This standard specifies the determination of lithium content in aluminum electrolytes. This standard is applicable to the determination of lithium in aluminum electrolytes. The measurement range is 0.100% ~ 3.00%.

2 method summary

The sample is dissolved in sulfuric acid, heated to remove fluoride, dissolved with hydrochloric acid and water; or dissolved with hydrochloric acid and boric acid, the test solution in the atomic absorption spectrometer At a wavelength of 670.8 nm, the lithium content was measured with an air-acetylene flame.

3 reagent

3.1 sulfuric acid (ρ1.84g/mL), excellent grade pure. 3.2 hydrochloric acid (ρ1.19g/mL), excellent grade pure. 3.3 Hydrochloric acid (1 1). 3.4 boric acid. 3.5 lithium standard storage solution. using any of the following methods to configure the lithium standard storage solution. 3.5.1 Weigh 6.1078g anhydrous lithium chloride (pure spectrum) or 7.9202g lithium sulfate (pure spectrum), dissolved in a small amount of water, into the 1000mL Capacity bottle, diluted with water to the mark, shake. 1 mL of this solution contained 1 mg of lithium. 3.5.2 Weigh 5.3228g of lithium carbonate (pure spectrum), add about 150mL of water, slowly add hydrochloric acid (3.3) to dissolve completely, boil remove two Carbon dioxide, cooled into the 1000mL volumetric flask, diluted with water to the mark, shake. 1 mL of this solution contained 1 mg of lithium. 3.6 lithium standard solution. remove the 10.00mL lithium standard storage solution (3.5) in a 250mL volumetric flask, diluted with water to the mark, mix, This solution contains 1 mL of 0.04 mg of lithium. 3.7 anhydrous ethanol, analytical grade.

4 instruments and equipment

4.1 platinum dish. diameter 80mm, height 35mm. 4.2 Atomic Absorption Spectrometer, with lithium hollow cathode lamp. In the best working conditions of the instrument, any atomic absorption spectrometer that achieves the following indicators can be used. --- Characteristic concentration. In the solution consistent with the measurement solution matrix, the characteristic concentration of lithium is not more than 1.0μg/mL. --- precision. with the highest concentration of standard solution measured 10 times, the standard deviation should not exceed 1.0% of the average absorbance; with the lowest Concentration of the standard solution measured 10 times, the standard deviation should not exceed the maximum concentration of the standard solution of the average absorbance of 0.5%. --- work curve linear. the work curve by the concentration of divided into five sections, the highest section of the difference between the absorbance and the difference between the lowest absorbance of the difference Should not be less than 0.7. ......

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of YS/T 768-2011_English be delivered?

Answer: Upon your order, we will start to translate YS/T 768-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of YS/T 768-2011_English with my colleagues?

Answer: Yes. The purchased PDF of YS/T 768-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.