SN/T 2139-2008 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 2139-2008	319	Add to Cart	3 days	Rules for the inspection of plastic products for import and export	Obsolete

Similar standards

QB/T 5077   QB/T 5076   QB/T 2358   SN/T 4132   SN/T 2199   SN/T 2198   

Basic data

Standard ID: SN/T 2139-2008 (SN/T2139-2008)
Description (Translated English): Rules for the inspection of plastic products for import and export
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y28
Classification of International Standard: 83.140.01
Word Count Estimation: 8,876
Date of Issue: 2008-09-04
Date of Implementation: 2009-03-16
Quoted Standard: GB/T 2828.1; GB/T 5009.60; GB/T 5009.61; GB/T 5009.67; GB 9681; GB 9687; GB 9688; GB 9689; GB 9690
Regulation (derived from): Industry standard filing Notice No. 11 of 2008
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the import and export of plastic products, health, quality requirements, sampling, testing and results of determination. This standard applies to food import and export inspection of plastic products, other plastic products can refer to use.

SN/T 2139-2008: Rules for the inspection of plastic products for import and export

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules for the inspection of plastic products for import and export Exit inspection and quarantine industry standard book People's Republic of China Inspection of import and export of plastic products Posted 2008-09-04 2009-03-16 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard was drafted. People's Republic of China Zhejiang Exit Inspection and Quarantine. The main drafters. Zhang Lilong, Han Liping, Li Dan, Shentu Jingling, including WeiWeired, ocean. This is the first issue Entry-exit inspection and quarantine industry standards. Inspection of import and export of plastic products

1 Scope

This standard specifies the import and export of plastic products sanitation, quality requirements, sampling, testing and the results of determination. This standard applies to food import and export inspection and plastic products, other plastic products can refer to use.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 2828.1 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQI) retrieval batch inspection sampling plan (GB/T 2828.1-2003, ISO 2859-1.1999, IDT) GB/T 5009.60 food packaging, polyethylene, polystyrene, polypropylene moldings health standard analytical methods of GB/T 5009.61 Method for analysis of melamine in food packaging moldings health standards GB/T 5009.67 analysis products of polyvinyl chloride for food packaging hygiene standards GB 9681 products of polyvinyl chloride for food packaging hygiene standards GB 9687 food packaging polyethylene moldings health standards GB 9688 food packaging polypropylene moldings health standards GB 9689 polystyrene products used as food packaging hygiene standards GB 9690 melamine products used for food packaging hygiene standards

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 A synthetic resin as a fundamental component of the organic polymer at a certain temperature and pressure molded into a shape not maintained at room temperature Variable products. 3.2 Direct food contact plastics. 3.3 The same contract, the same number, the same raw materials under the same conditions of production per unit of product produced, called the inspection lot, referred to as batch. Each test Batch batch shall not exceed 100 000 units of product.

4 General requirements

Imports of plastic products should meet the requirements of the relevant standards; exports of plastic products, the requirements of the importing country, the importing country shall comply with the relevant standards Requirements, no requirements should be consistent with China's relevant standards. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2139-2008_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2139-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2139-2008_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2139-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.