SN/T 4132-2015 English PDFUS$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 4132-2015: Determination of slip resistance of plastic bath and shower mats. Ramp test Status: Valid
Basic dataStandard ID: SN/T 4132-2015 (SN/T4132-2015)Description (Translated English): Determination of slip resistance of plastic bath and shower mats. Ramp test Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Y28 Classification of International Standard: 97.150 Word Count Estimation: 6,621 Date of Issue: 2015-02-09 Date of Implementation: 2015-09-01 Quoted Standard: GB/T 3505; JC/T 858 Adopted Standard: DIN 51097-1992, MOD Regulation (derived from): State-Quality-Inspection-Accreditation [2015] 59 Issuing agency(ies): General Administration of Customs Summary: This standard specifies the definitions and test methods for plastic bath mat non-slip properties. This standard applies to wet barefoot area bathroom, dressing room, bathroom, pool, use plastic bath mats, including products with a suction cup and without suction cups, the process of using the human body bare feet and wet bath mat contacts. SN/T 4132-2015: Determination of slip resistance of plastic bath and shower mats. Ramp test---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Determination of slip resistance of plastic bath and shower mats.Ramp test People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Plastic bathroom mat anti-slip performance test method Tilting platform method Ramptest Released on.2015-02-09 2015-09-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordThis standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard is modified to use DIN51097-1992 "ground material test. anti-skid performance test. wet barefoot area a pedestrian test method" (German version). The main differences between this standard and DIN51097-1992 are. --- Changed the size requirements for the test surface, increasing the requirements for sample placement; --- Changed the requirements for the test solution; --- Increased the requirement for the step frequency; --- Added a chapter on normative references (Chapter 2); --- Added a chapter on calibration (Chapter 10); --- Removed the grading chapter of DIN51097-1992. Please note that some of the contents of this document may involve patents. The issuing organization of this document is not responsible for identifying these patents. This standard is proposed and managed by the National Certification and Accreditation Administration. This standard was drafted. Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Fujian Entry and Exit Inspection of the People's Republic of China Epidemic situation. The main drafters of this standard. Xiao Jinghong, Yuan Fangli, Song Zhi, Liu Yamin, Liang Baiqing, Cao Xiaoyan. Plastic bathroom mat anti-slip performance test method Tilting platform method1 ScopeThis standard specifies the definition and test method for the anti-slip performance of plastic bathroom mats. This standard applies to plastic bathroom mats used in wet barefoot areas such as bathrooms, changing rooms, bathrooms, swimming pools, including with suction cups and without The suction cup product is in contact with the wet bathroom mat during use.2 Normative referencesThe following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 3505 Product Geometry Specification (GPS) Surface structure profiling terms, definitions and surface structure parameters JC/T 858 cast acrylic sheet for residential bath and shower tray3 Terms and definitionsThe following terms and definitions apply to this document. 3.1 Anti-slip performance slipresistance The ability of ground materials to withstand the risk of slipping. 3.2 Dynamic critical angle acceptanceangle By adjusting the angle of an inclined platform, the person walking on it reaches the limit of safe walking, and when the foot slides angle. 3.3 Wet barefoot area wet-loadedbarefootarea The ground is usually damp and provides areas for people to walk barefoot, such as bathrooms, changing rooms, laundry and toilets. 3.4 Floor material with limit value floorcoveringwithlimitvalue Tested in accordance with this standard, the non-slip performance (in terms of angle) is 12 °, 18 ° and 24 ° ground material.4 Principle of the methodTwo testers, barefoot, face down, maintain a vertical position, and walked forward and backward on the test board on which the sample was mounted. A continuous and consistent test liquid flows through the sample during the test. The angle between the test plate and the horizontal plane increases at a constant speed until the test The tester's movement showed signs of insecurity. The resulting dynamic critical angle is used to assess the level of slip resistance. ...... |
