Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

SN/T 2198-2008 English PDF

US$174.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
SN/T 2198-2008: Food contact materials. Plastics. Test methods for overall migration into aqueous food simulants. Using a pouch
Status: Valid
Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
SN/T 2198-2008174 Add to Cart 3 days Food contact materials. Plastics. Test methods for overall migration into aqueous food simulants. Using a pouch Valid

Similar standards

QB/T 5077   QB/T 5076   QB/T 2358   SN/T 4132   SN/T 2199   

Basic data

Standard ID: SN/T 2198-2008 (SN/T2198-2008)
Description (Translated English): Food contact materials. Plastics. Test methods for overall migration into aqueous food simulants. Using a pouch
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Y28
Word Count Estimation: 9,995
Date of Issue: 2008-11-18
Date of Implementation: 2009-06-01
Quoted Standard: GB/T 12808; EN 1186-1-2002
Adopted Standard: BS EN 1186-7-2002, IDT
Regulation (derived from): National Quality Inspection [2008] No. 577
Issuing agency(ies): General Administration of Customs
Summary: This standard specifies the plastic film or sheet made of standard bag, in a limited test time and temperature (�� 70��C), through the plastic bag filled with the selected aqueous food simulants, measured the surface to the inner plastic bag aqueous food simulants total migration test methods. This standard applies to pressure sealed by heat sealing or standard bag made of all kinds of plastic film, plastic film, especially suitable for multi-layer composite plastics. Test, test only direct contact with food that layer can be.

SN/T 2198-2008: Food contact materials. Plastics. Test methods for overall migration into aqueous food simulants. Using a pouch


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Food contact materials.Plastics.Test methods for overall migration into aqueous food simulants.Using a pouch Exit inspection and quarantine industry standard book People's Republic of China Plastic food contact materials Watery overall migration food simulants Test Method A pouch Posted 2008-11-18 2009-06-01 implementation People's Republic of China The State Administration of Quality Supervision, Inspection and Quarantine released

Foreword

This standard is equivalent to using BSEN1186-7.2002 "Materials and articles in plastic water food simulants in contact with food for overall migration Amount bag Test Method Method. " This standard is in accordance with GB/T 1.1-2000. Requirements "Standardization Guide Part 1 standard structure and write rules," the root According BSEN1186-7.2002 redrafted written. The main modifications are. --- Because regardless of the technical content of this standard, the preamble of the original text deleted; --- Chapter 2, according to GB/T 1.1-2000 requirements to prepare normative references; --- 5.11 evaporating dish to remove metals, ceramics and other glass evaporating dish to retain only evaporating dish. The Standard Appendix A, Appendix B is an informative annex. This standard is proposed and managed by the National Certification and Accreditation Administration Committee. This standard by the People's Republic of China Liaoning Entry-Exit Inspection and Quarantine is responsible Shanghai People's Republic of China Drafted. The main drafters of this standard. in a vast, Xu Wei, Zhao Xuerong, Chen Wei and so on. This standard is the first release of the entry-exit inspection and quarantine industry standards. Plastic food contact materials Watery overall migration food simulants Test Method A pouch

1 Scope

This standard specifies the plastic film or sheet made of standard bags, under defined test time and temperature (≤70 ℃), by filling the plastic bag Filling the selected aqueous food simulants, Test Method for plastic inner surface to aqueous food simulants total migration assay. This standard applies to all kinds of plastic film which can be sealed, plastic sheets made of standard bag by heat sealing or pressure; especially suitable for multi-layer composite plastic. Test, test only direct contact with the food that one can be. Standard sizes of plastic bags as described in 6.3. NOTE. In addition to the specifications 10cm × 10cm, other size bags can also be used to test, but it should be possible to meet the total surface area in contact with food is not less than 1dm2.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard. After the increase, if any change, then, only those marked increase rewritten into Prospective new version applies to this standard, for no dated references, should be using the latest version. GB/T 12808 standard laboratory glassware single line pipette (GB/T 12808-1991, eqv648. 1977) EN1186-1.2002 plastic food contact materials Part I. Selection Guide for total migration test conditions and methods Principle 3 A total migration of non-volatile substances plastic sample evaporation residue refers to the quality of food simulants (see EN1186-1.2002 4.5 and Chapter 5). The plastic film or sheet made of standard bags at no more than 70 ℃ conditions, water food simulants bagged, and maintain a certain time between. Until after a predetermined time from the bag and pour the food simulant evaporate each sample in food simulant, measured non-volatile residue quality, And in milligrams per square decimeter sample surface area in contact with the food simulant to indicate that the mg/dm2 representation. NOTE. In some cases the test temperature can exceed 70 ℃. The test report overall migration, taking the average value of three tests.

4 Reagents and materials

Reagent preparation and purity see EN1186-1.2002 in Chapter 5. 4.1 simulant A. distilled water or water homogeneity. 4.2 mimetic B. an aqueous solution of acetic acid 30g/L. 4.3 mimetic C. aqueous ethanol (9 + 1). 4.4 Alcohol mimetic. alcohol content more than 10% (volume fraction) of liquid or beverage. Note. For alcohol exceeds 10% (volume fraction) of liquid and drink direct contact with the plastic material, tests shall be quite alcohol concentration of the aqueous solution get on. 5. Apparatus 5.1 Cut model. clean, smooth glass, metal or plastic plate, size 250mm × 250mm.
......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 2198-2008_English be delivered?

Answer: Upon your order, we will start to translate SN/T 2198-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 2198-2008_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 2198-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.