SN/T 1791.8-2018 English PDFSN/T 1791.8: Historical versions
Basic dataStandard ID: SN/T 1791.8-2018 (SN/T1791.8-2018)Description (Translated English): (Inspection and quarantine procedures for solid wastes imported as raw materials - Part 8: Waste motor) Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Z70 Date of Issue: 2018-12-29 Date of Implementation: 2018-12-31 Older Standard (superseded by this standard): SN/T 1791.8-2006 Regulation (derived from): General Administration of Customs Announcement No.216 of 2018 Issuing agency(ies): General Administration of Customs SN/T 1791.8-2006: Rules for the inspection and quarantine of waste imported as raw material. Part 7: Scrap motor---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection and quarantine of garbage imported raw material.Part 7. Scrap motor Book of the People's Republic of China Entry and Exit Inspection and Quarantine Replace SN 0577-1996 Inspection and quarantine procedures for wastes imported as raw materials Part 8. Waste motor Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1791 "Inspection and Quarantine Regulations for Imported Wastes as Raw Materials" is divided into 13 parts. ---Part 1. Waste plastics; --- Part 2. Sugar cane molasses; --- Part 3. Wood and wood products waste; --- Part 4. scrap steel; ---Part 5. Ships and other floating structures for disassembly; ---Part 6. Waste hardware appliances; ---Part 7. Waste wire and cable; ---Part 8. Waste motor; ---Part 9. Waste non-ferrous metals; ---Part 10. Smelting slag; --- Part 11. Waste car parts; --- Part 12. Textile waste; --- Part 13. Waste paper or cardboard. This part is the eighth part of SN/T 1791. This part is based on the relevant provisions of GB 16487.8 "Importing waste motor for environmental protection control of solid waste that can be used as raw materials" SN 0577-1996 "Imported Waste Motor Inspection Procedures (Trial)" was properly adjusted and revised, and based on the original regulations, Seek chapter "and the contents of the quarantine, and according to the actual situation of the port and the characteristics of the imported waste motor, some provisions of other chapters are carried out. Enriched. This section replaces SN 0577-1996 from the date of implementation. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Zhejiang Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, China Entry-Exit Inspection and Quarantine Association waste materials recycling Resource Inspection and Quarantine Branch. Drafters of this section. Luo Haibin, Zhang Jie. The previous versions of the standards replaced by this section are. ---SN 0577-1996. Inspection and quarantine procedures for wastes imported as raw materials Part 8. Waste motor1 ScopeThis part of SN/T 1791 specifies the terms and definitions, requirements, sampling, inspection and quarantine, and results of imported waste motors that can be used as raw materials. Determination and disposal. This section applies to the inspection and quarantine of waste motor mainly based on recycled copper with the customs commodity number 7404.0000.10, in order to recover other gold. Waste motor-based waste motors can also be used as reference.2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of SN/T 1791. For dated references, All subsequent amendments (not including errata content) or revisions do not apply to this section, however, an agreement is encouraged under this section. The parties are studying whether the latest version of these documents can be used. For undated references, the latest edition applies to this section. GB 5085 (all parts) Hazardous waste identification criteria GB 13015 Contains PCB pollution control standards GB/T 15555 (all parts) Solid waste leaching toxicity test method GB 16487.8 Imported solid waste environmental protection control standard waste motor SN 0570 Inspection rules for radioactive contamination of imported scrap metal SN/T 1253 In-and-out container and its cargo disinfection procedures SN/T 1254 Health and Quarantine Inspection Procedure for Entry and Exit Waste Materials SN/T 1270 Inbound and outbound bulk cargo disinfection procedures SN/T 1281 inbound and outbound container and its cargo removal procedures SN/T 1286 In and Out Containers and Their Cargo Removal Procedures SN/T 1302 Insects and Bulk Procedures for Bulk Goods SN/T 1331 Entry and exit bulk cargo deratization procedures National Directory of Hazardous Wastes3 Terms and definitionsThe following terms and definitions apply to this part of SN/T 1791. 3.1 Used to dismantle recycled metals and non-metal materials, if they have lost their original use value or have not lost their use value but have been abandoned or abandoned. Electric motor or generator. 3.2 Other substances that are mixed into imported waste motors during production, collection, packaging, and transportation (excluding packaging for imported waste motors and Other substances to be used during transportation). 3.3 The same pre-shipment inspection certificate and/or the same waybill (bill of lading) for one inspection. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of SN/T 1791.8-2018_English be delivered?Answer: Upon your order, we will start to translate SN/T 1791.8-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of SN/T 1791.8-2018_English with my colleagues?Answer: Yes. The purchased PDF of SN/T 1791.8-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version SN/T 1791.8-2018?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1791.8-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
