SN/T 1791.3-2018 English PDFSN/T 1791.3: Historical versions
Basic dataStandard ID: SN/T 1791.3-2018 (SN/T1791.3-2018)Description (Translated English): (Inspection and quarantine procedures for solid wastes imported as raw materials - Part 3: Wood and wood products waste) Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Z70 Date of Issue: 2018-12-29 Date of Implementation: 2018-12-31 Older Standard (superseded by this standard): SN/T 1791.3-2006 Regulation (derived from): General Administration of Customs Announcement No.216 of 2018 Issuing agency(ies): General Administration of Customs SN/T 1791.3-2006: Rules for the inspection and quarantine of waste imported as raw material. Part 3: Wood and wood articles wastes---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection and quarantine of garbage imported raw material.Part 3. Wood and wood articles wastes Book of the People's Republic of China Entry and Exit Inspection and Quarantine Replace SN 0572-1996 Inspection and quarantine procedures for wastes imported as raw materials Part 3. Wood and wood scrap Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1791 "Inspection and Quarantine Regulations for Imported Wastes as Raw Materials" is divided into 13 parts. ---Part 1. Waste plastics; --- Part 2. Sugar cane molasses; --- Part 3. Wood and wood products waste; --- Part 4. scrap steel; ---Part 5. Ships and other floating structures for disassembly; ---Part 6. Waste hardware appliances; ---Part 7. Waste wire and cable; ---Part 8. Waste motor; ---Part 9. Waste non-ferrous metals; ---Part 10. Smelting slag; --- Part 11. Waste car parts; --- Part 12. Textile waste; --- Part 13. Waste paper or cardboard. This part is the third part of SN/T 1791. This part is based on GB 16487.3 "Importing environmental protection control standards for solid wastes that can be used as raw materials for wood and wood products waste" Clause, appropriate adjustments and repairs to SN 0572-1996 "Importation of Inspection Procedures for Importing Wood and Wood Products Wastes for Raw Materials (Trial)" In addition, two kinds of commodity catalogues have been added on the basis of the scope of the original regulations, and a "requirements" chapter, quarantine and inspection rules have been added to the framework structure. Transfer, and enrich the provisions of other chapters based on the characteristics of imported solid waste that can be used as raw materials. This section replaces SN 0572-1996 from the date of implementation. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangsu Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China. The main drafters of this section. Li Ningsheng, Yan Ming, He Xianwei, Zhang Jie. The previous versions of the standards replaced by this section are. ---SN 0572-1996. Inspection and quarantine procedures for wastes imported as raw materials Part 3. Wood and wood scrap1 ScopeThis part of SN/T 1791 specifies the terms and definitions, requirements, and requirements for imported waste wood and wood product waste that have lost their original value. Sampling and sample preparation, inspection and quarantine, quality inspection, moisture determination and weight identification and determination and disposal of results. This section applies to the inspection and quarantine of the following customs commodity numbers. HS code waste material name 4401.3000 Sawdust, wood scrap and debris, whether or not bonded into round segments, blocks, sheets or similar shapes 4501.9000 cork waste, broken, granulated or powdered cork2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of SN/T 1791. For dated references, All subsequent amendments (not including errata content) or revisions do not apply to this section, however, an agreement is encouraged under this section. The parties are studying whether the latest version of these documents can be used. For undated references, the latest edition applies to this section. GB 5085 (all parts) Hazardous waste identification criteria GB/T 15555 (all parts) Solid waste leaching toxicity test method GB 16487.3 Imported solid waste environmental protection control standard for wood and wood products waste SN/T 0188 Import and export commodity weight identification procedures SN 0570 Inspection rules for radioactive contamination of imported scrap metal SN/T 1791.13 Inspection and quarantine procedures for wastes used as raw materials - Part 13. Waste paper or cardboard SN/T 1253 In-and-out container and its cargo disinfection procedures SN/T 1254 Health and Quarantine Inspection Procedure for Entry and Exit Waste Materials National Hazardous Waste Catalogue3 Terms and definitionsThe following terms and definitions apply to this part of SN/T 1791. 3.1 The same bill of lading (bill of lading) and/or the same pre-shipment inspection certificate. 3.2 The scrap produced during the wood processing and the wood products that lost their original value. 3.3 There are some mild mildews in waste wood and cork waste, but not all of them have been spoiled. 3.4 Wastes other than waste wood or cork waste that are mixed during collection, packaging, and transportation (including. prohibition of inbound inclusions, ...... |
