SN/T 1791.4-2018 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SN/T 1791.4-2018: (Inspection and quarantine procedures for solid waste imported as raw materials - Part 4: Scrap steel) Status: Valid SN/T 1791.4: Historical versions
Basic dataStandard ID: SN/T 1791.4-2018 (SN/T1791.4-2018)Description (Translated English): (Inspection and quarantine procedures for solid waste imported as raw materials - Part 4: Scrap steel) Sector / Industry: Commodity Inspection Standard (Recommended) Classification of Chinese Standard: Z70 Word Count Estimation: 9,928 Date of Issue: 2018-12-29 Date of Implementation: 2018-12-31 Older Standard (superseded by this standard): SN/T 1791.4-2006 Regulation (derived from): General Administration of Customs Announcement No.216 of 2018 Issuing agency(ies): General Administration of Customs SN/T 1791.4-2006: Rules for the inspection and quarantine of waste imported as raw material. Part 4: Scrap of iron and steel---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Rules for the inspection and quarantine of garbage imported raw material.Part 4. Scrap of iron and steel People's Republic of China Entry-Exit Inspection and Quarantine Industry Standard Replace SN 0581-1996 Inspection and quarantine procedures for wastes imported as raw materials Part 4. Scrap steel Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued ForewordSN/T 1791 "Inspection and Quarantine Regulations for Imported Wastes as Raw Materials" is divided into 13 parts. ---Part 1. Waste plastics; --- Part 2. Sugar cane molasses; --- Part 3. Wood and wood products waste; --- Part 4. scrap steel; ---Part 5. Ships and other floating structures for disassembly; ---Part 6. Waste hardware appliances; ---Part 7. Waste wire and cable; ---Part 8. Waste motor; ---Part 9. Waste non-ferrous metals; ---Part 10. Smelting slag; --- Part 11. Waste car parts; --- Part 12. Textile waste; --- Part 13. Waste paper or cardboard. This part is the fourth part of SN/T 1791. This part is based on the relevant provisions of GB 16487.6 "Imported waste steel for environmental protection control of solid wastes that can be used as raw materials" SN 0581-1996 "Imports can be used as raw material scrap steel inspection procedures (for trial implementation)" has been appropriately adjusted and revised, based on the original standards, Added the “Requirements” chapter and the contents of the quarantine, and according to the actual situation of the port and the characteristics of imported scrap steel, some of the other chapters The terms have been enriched. This section replaces SN 0581-1996 from the date of implementation. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Jiangsu Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, China Entry-Exit Inspection and Quarantine Association. The main drafters of this section. Yan Ming, Qian Baoyuan, Wu Jianfeng, Zhu Jinlian, Zhang Jie, Li Ningsheng, Xue Qingbo, He Xianwei. The previous versions of the standards replaced by this section are. ---SN 0581-1996. Inspection and quarantine procedures for wastes imported as raw materials Part 4. Scrap steel1 ScopeThis part of SN/T 1791 specifies the terms and definitions, requirements, sampling, inspection and quarantine, and results of imported scrap steel that can be used as raw materials. Determination and disposal. This section applies to the inspection and quarantine of scrap steel of the following customs commodity number. Customs commodity number product name 7204.1000.00 Cast iron waste 7204.2100.00 stainless steel waste 7204.2900.00 Other alloy steel scrap 7204.3000.00 tinned steel scrap 7204.4100.00 Steel scrap produced during car, planing, milling, grinding, sawing, boring, shearing, and punching, whether bundled or not 7204.4900.90 Other steel waste materials 7204.5000.00 Reinforced scrap steel ingots (including waste machine tools, waste locomotives, waste machine fronts, etc.)2 Normative referencesThe provisions in the following documents become the provisions of this part by reference to this part of SN/T 1791. For dated references, All subsequent amendments (not including errata content) or revisions do not apply to this section, however, an agreement is encouraged under this section. The parties are studying whether the latest version of these documents can be used. For undated references, the latest edition applies to this section. GB 5085 (all parts) Hazardous waste identification criteria GB 13015 Contains PCB pollution control standards GB/T 15555 (all parts) Solid waste leaching toxicity test method GB 16487.6 Imported solid waste environmental protection control standard used as raw materials SN/T 0187 Import and export commodity weight identification procedures SN/T 0188 Import and export commodity weight identification procedures SN 0570 Inspection rules for radioactive contamination of imported scrap metal SN/T 1253 In-and-out container and its cargo disinfection procedures SN/T 1254 Health and Quarantine Inspection Procedure for Entry and Exit Waste Materials SN/T 1270 Inbound and outbound bulk cargo disinfection procedures SN/T 1281 inbound and outbound container and its cargo removal procedures SN/T 1286 In and Out Containers and Their Cargo Removal Procedures SN/T 1302 Insects and Bulk Procedures for Bulk Goods SN/T 1331 Entry and exit bulk cargo deratization procedures National Directory of Hazardous Wastes ...... |
