SN/T 1791.1-2018 English PDF

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
SN/T 1791.1-2018	RFQ	ASK	3 days	(Inspection and quarantine procedures for solid wastes imported as raw materials - Part 1: Waste plastics)	Obsolete
SN/T 1791.1-2006	279	Add to Cart	3 days	Rules the inspection and quarantine of waste imported as raw material. Part 1: Waste and scrap of plastics	Obsolete

Similar standards

HJ 364   GB 13015   HJ 2025   SN/T 1791.4   SN/T 1791.13   SN/T 1791.3   

Basic data

Standard ID: SN/T 1791.1-2018 (SN/T1791.1-2018)
Description (Translated English): (Inspection and quarantine procedures for solid wastes imported as raw materials - Part 1: Waste plastics)
Sector / Industry: Commodity Inspection Standard (Recommended)
Classification of Chinese Standard: Z70
Date of Issue: 2018-12-29
Date of Implementation: 2018-12-31
Older Standard (superseded by this standard): SN/T 1791.1-2006
Regulation (derived from): General Administration of Customs Announcement No.216 of 2018
Issuing agency(ies): General Administration of Customs

SN/T 1791.1-2006: Rules the inspection and quarantine of waste imported as raw material. Part 1: Waste and scrap of plastics

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Rules the inspection and quarantine of garbage imported raw material. Part 1. Waste and scrap of plastics Book of the People's Republic of China Entry and Exit Inspection and Quarantine Replace SN 0625.1-1997, SN 0625.2-1997 Inspection and quarantine procedures for wastes imported as raw materials Part 1. Waste plastic Released on.2006-08-28 2007-03-01 implementation People's Republic The General Administration of Quality Supervision, Inspection and Quarantine issued

Foreword

SN/T 1791 "Inspection and Quarantine Regulations for Imported Wastes as Raw Materials" is divided into 13 parts. ---Part 1. Waste plastics; --- Part 2. Sugar cane molasses; --- Part 3. Wood and wood products waste; --- Part 4. scrap steel; ---Part 5. Ships and other floating structures for disassembly; ---Part 6. Waste hardware appliances; ---Part 7. Waste wire and cable; ---Part 8. Waste motor; ---Part 9. Waste non-ferrous metals; ---Part 10. Smelting slag; --- Part 11. Waste car parts; --- Part 12. Textile waste; --- Part 13. Waste paper or cardboard. This part is the first part of SN/T 1791. This part is based on the relevant provisions of GB 16487.12 "Imported waste plastics for environmental protection control of solid wastes that can be used as raw materials" SN 0625.1-1997 "Importable waste plastics inspection procedures for polyethylene terephthalate (PET) waste (for trial)" and SN 0625.2-1997 "Important waste plastics inspection procedures for waste materials, waste of ethylene, styrene, vinyl chloride polymer and other polymers Materials (Trial) were properly adjusted and revised to combine the two standards into one, adding a “requirements” chapter and health quarantine and animal and plant inspections. The contents of the epidemic, and according to the characteristics of imported waste plastics, some provisions of other chapters have been enriched. This section replaces SN 0625.1-1997 and SN 0625.2-1997 from the date of implementation. This part is proposed and managed by the National Certification and Accreditation Administration. This section drafted by. Guangdong Entry-Exit Inspection and Quarantine Bureau of the People's Republic of China, Zhuhai entry and exit inspection of the People's Republic of China Epidemic situation. The main drafters of this section. Lin Hongxiong, Ding Xiaoqin, Long Yusheng, Bei Yuhong, Liu Shinan, He Hongwei. The previous versions of the standards replaced by this section are. ---SN 0625.1-1997, SN 0625.2-1997. Inspection and quarantine procedures for wastes imported as raw materials Part 1. Waste plastic

1 Scope

This part of SN/T 1791 specifies the terms and definitions, requirements, sampling, inspection and quarantine, and results of imported waste plastics that can be used as raw materials. Determination and disposal. This section applies to the inspection and quarantine of waste plastics of the following customs commodity numbers. Customs commodity number solid waste name 3915.1000.00 Waste and scrap of ethylene polymer 3915.2000.00 Waste and scrap of styrene polymer 3915.3000.00 Waste and scrap of vinyl chloride polymer 3915.9010.00 Polyethylene terephthalate waste and scrap 3915.9090.00 Waste and scrap of other plastics

2 Normative references

The provisions in the following documents become the provisions of this part by reference to this part of SN/T 1791. For dated references, All subsequent amendments (not including errata content) or revisions do not apply to this section, however, an agreement is encouraged under this section. The parties are studying whether the latest version of these documents can be used. For undated references, the latest edition applies to this section. GB/T 2035 plastic terminology and its definition GB 5085.3 Identification of hazardous wastes GB/T 15555 (all parts) Solid waste leaching toxicity test method GB 16487.12 Imported solid waste environmental protection control standard waste plastics SN 0570 Inspection rules for radioactive contamination of imported scrap metal SN/T 1253 In-and-out container and its cargo disinfection procedures SN/T 1254 Health and Quarantine Inspection Procedure for Entry and Exit Waste Materials SN/T 1270 Inbound and outbound bulk cargo disinfection procedures SN/T 1281 inbound and outbound container and its cargo removal procedures SN/T 1286 In and Out Containers and Their Cargo Removal Procedures SN/T 1302 Insects and Bulk Procedures for Bulk Goods SN/T 1331 Entry and exit bulk cargo deratization procedures National Directory of Hazardous Wastes

3 Terms and definitions

The following terms and definitions established by GB/T 2035 apply to this part of SN/T 1791. 3.1 Thermoplastic scraps, trims and defectives produced during the processing of plastics and plastic products, or used and processed Washed thermoplastic (sheet, block, granule or powder). ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of SN/T 1791.1-2018_English be delivered?

Answer: Upon your order, we will start to translate SN/T 1791.1-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically in 9 seconds (download/delivered in 9 seconds). The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of SN/T 1791.1-2018_English with my colleagues?

Answer: Yes. The purchased PDF of SN/T 1791.1-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version SN/T 1791.1-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version SN/T 1791.1-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.