SB/T 10440-2007 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. SB/T 10440-2007: Wood preservative-treating vacuum/pressure injection equipment set Status: Valid
Basic dataStandard ID: SB/T 10440-2007 (SB/T10440-2007)Description (Translated English): Wood preservative-treating vacuum/pressure injection equipment set Sector / Industry: Domestic Trade Industry Standard (Recommended) Classification of Chinese Standard: J74 Classification of International Standard: 23.020.30 Word Count Estimation: 8,898 Date of Issue: 2007-09-10 Date of Implementation: 2008-03-01 Quoted Standard: GB 150; GB/T 14019; JB 4730 Regulation (derived from): ?Ministry of Commerce Announcement 2007 No.72 Issuing agency(ies): Ministry of Commerce of the People's Republic of China Summary: This standard specifies the vacuum and (or) pressure impregnation (treated) wood preservative equipment unit definition, technical requirements, inspection, signs, packaging, transport, installation and commissioning. SB/T 10440-2007: Wood preservative-treating vacuum/pressure injection equipment set---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Wood preservative-treating vacuum/pressure injection equipment set ICS 23.020.30 J74 Record number. 21775-2007 People's Republic of China domestic trade industry standard Vacuum and/or pressure infusion (treatment) Wood anti-corrosion equipment unit Released on.2007-09-10 2008-03-01 implementation Published by the Ministry of Commerce ContentForeword III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical requirements 1 5 other 2 6 test 3 7 Signs, packaging and shipping 3 8 Installation and commissioning 3ForewordThis standard is proposed and managed by the Ministry of Commerce of the People's Republic of China. This standard is drafted by. Wood Conservation Development Center. Participated in the drafting of this standard. Wood Conservation Development Center, Yingtan Wood Anticorrosion Plant of the Ministry of Railways, and Tianhe Xinyu Wood Anticorrosion Plant of Guangzhou. The main drafters of this standard. Yu Qiu, Ma Shouhua, Tao Yiming, Fan Liangsen, Qian Xiaohang, Xu Yunhui. This standard is the first release. Vacuum and/or pressure infusion (treatment) Wood anti-corrosion equipment unit1 ScopeThis standard specifies the definition, technical requirements, inspection, signs and packages of wood anti-corrosion equipment for vacuum and/or pressure infusion (treatment). Loading, transportation, installation and commissioning. This standard applies to fixed equipment units that perform vacuum and/or pressure infusion (treatment) on wood by waterborne preservatives.2 Normative referencesThe terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB 150 steel pressure vessel GB/T 14019 wood anti-corrosion term JB4730 Non-destructive testing of pressure equipment Pressure Vessel Safety Technology Supervision Regulations Quality and Technical Supervision Bureau Pot [1999] No. 1543 Terms and definitionsThe following terms and definitions as defined in GB 150 and GB/T 14019 apply to this standard. 3.1 A complete set of equipment for the preservative treatment of wood by vacuum and/or pressurization. Mainly by pressure infusion (treatment) tank, pressurized system System, vacuum system, suction and drainage system, dosing system, liquid storage system, electronic control system and wood shipping system. 3.2 The highest pressure allowed in the pressure impregnation (treatment) tank under normal operating conditions.4 Technical requirements4.1 Basic requirements Equipment units shall be manufactured and assembled in accordance with approved design drawings and technical documentation. 4.2 Pressure infusion (treatment) tank 4.2.1 The structural design, manufacture and inspection of pressure infusion (treatment) tanks shall comply with the “Safety Technical Supervision Regulations for Pressure Vessels” and GB 150 The relevant provisions. 4.2.2 The selection of tank materials shall comply with the relevant provisions of Chapter 2 of the Pressure Vessel Safety Technical Supervision Regulations and GB 150, using anti-corrosion. The corrosion performance is not lower than that of low alloy steel. 4.2.3 The working pressure of the tank is not less than 1.5MPa. 4.2.4 The inner wall of the tank should have an anti-corrosion layer, and the outer wall should be coated with anti-corrosive paint. 4.2.5 The tank body should be equipped with anti-loading trolley lifting device. ...... |
