GB/T 90.3-2010 English PDF

US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 90.3-2010: Fasteners -- Quality assurance system
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 90.3-2010	274	Add to Cart	3 days	Fasteners -- Quality assurance system	Valid

Similar standards

GB/T 90.1   GB/T 97.1   GB/T 91   GB/T 70.3   GB/T 70.6   GB/T 71   

Basic data

Standard ID: GB/T 90.3-2010 (GB/T90.3-2010)
Description (Translated English): Fasteners -- Quality assurance system
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J13
Classification of International Standard: 21.060.20
Word Count Estimation: 14,138
Date of Issue: 2011-01-10
Date of Implementation: 2011-10-01
Quoted Standard: GB/T 90.1-2002; GB/T 3098.17-2000; GB/T 19000-2008
Adopted Standard: ISO 16426-2002, IDT
Regulation (derived from): National Standard Approval Announcement 2011 No.1 (Total No.166)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the fastener manufacturer and distributor of quality assurance system should follow the requirements. The purpose of these requirements is to reduce or prevent substandard fastener products, in order to achieve the specified characteristics close to zero-defect quality goals. This section describes the raw material from the receiver, through the manufacturing process to require delivery to dealers or users.

GB/T 90.3-2010: Fasteners -- Quality assurance system

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fasteners. Quality assurance system ICS 21.060.20 J13 National Standards of People's Republic of China Fastener Quality Assurance System (ISO 16426.2002, IDT) Issued on. 2011-01-10 2011-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This section GB/T 90 (hereinafter referred to in this section) is the national standard "fasteners acceptance inspection, packaging and quality assurance" series of standards First, the series includes. --- GB/T 90.1-2002 fasteners acceptance inspection; --- GB/T 90.2-2002 fastener marking and packaging; This section GB/T 90 Part 3. This part identical with ISO 16426.2002 "Fastener Quality Assurance System" (in English), the main editorial changes are as follows. --- In the reference file, instead of using our standards with international standards (Chapter 2). --- With GB/T 19000-2008 "Quality Planning" Terms and definitions instead of the ISO 16426 "Quality Plan" term (see 3.1). Appendix A of this section is informative appendix. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee fasteners (SAC/TC85) centralized. This section is responsible for drafting unit. Productivity Promotion Center in the machine. Participated in the drafting of this section. general industrial machinery parts and components product quality supervision and inspection center, Ningbo Kowloon Fastener Manufacturing Co. the company. This part of the National Standardization Technical Committee Secretariat responsible for the interpretation of fasteners. This section is the first issue. Fastener Quality Assurance System

1 Scope

GB/T of the provisions of section 90 of the fastener manufacturer and distributor of quality assurance system should follow requirements. These requirements The purpose is to reduce or prevent substandard fasteners, in order to achieve the specified characteristics close to zero-defect quality goals. This section describes the raw material from the reception, through the manufacturing process to claim the delivery to the dealer or user (assembler) of.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 90.1-2002 fasteners acceptance inspection (idt ISO 3269.2000) GB/T 3098.17-2000 Fasteners - Preloading test for detection of hydrogen embrittlement - Parallel bearing surface method (idt ISO 15330.1999) GB/T 19000-2008 Quality Management System - Fundamentals and vocabulary (ISO 9000.2005, IDT)

3 Terms and definitions

This standard uses the following terms and definitions. 3.1 Quality Planning advancedqualityplanning Part of quality management (command and control an organization with regard to quality coordinated activities), we are committed to setting quality objectives (in terms of quality Objective pursued) and provides the necessary operational processes (the inputs into output of interrelated set of activities or interacting) and related Resources to achieve quality goals. Note. The preparation of quality plan (for a specific project, product, process or contract provisions by whom and which procedures and associated resources files when used) may be qualitative Part of the amount planned. 3.2 Restructuring alter After the original manufacturing process, any process change fastener geometry, mechanical performance or operating characteristics. 3.3 Process capability index value Cpk value is a measure of process capability. Step average and it has the upper and lower limits of a normal distribution and characteristics Standard deviation of the relevant characteristics. 3.4 Customer customer Institutions or individuals receiving product. Note. A customer can be a user or dealer. 3.5 Mixed commingling Load the same type of fasteners in different production batches of the same package. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 90.3-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 90.3-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 90.3-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 90.3-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.