Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 70.3-2023 PDF English

US$290.00 · In stock · Download in 9 seconds
GB/T 70.3-2023: Hexagon socket countersunk head screws with reduced loadability
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 70.3: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 70.3-2023290 Add to Cart Auto, 9 seconds. Hexagon socket countersunk head screws with reduced loadability Valid
GB/T 70.3-200885 Add to Cart Auto, 9 seconds. Hexagon socket countersunk head screws Obsolete
GB/T 70.3-2000439 Add to Cart 4 days Hexagon socket countersunk head screws Obsolete

Similar standards

GB/T 70.2   GB/T 70.4   GB/T 70.1   GB/T 70.6   

GB/T 70.3-2023: Hexagon socket countersunk head screws with reduced loadability

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT70.3-2023
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.060.10 CCS J 13 Replacing GB/T 70.3-2008 Hexagon Socket Countersunk Head Screws with Reduced Loadability (ISO 10642:2019, Fasteners – Hexagon Socket Countersunk Head Screws with Reduced Loadability, MOD) 降低承载能力内六角沉头螺钉 ISSUED ON: MAY 23, 2023 IMPLEMENTED ON: DECEMBER 1, 2023 Issued by: State Administration for Market Regulation; Standardization Administration of the People’s Republic of China.

Table of Contents

Foreword ... 3 Introduction ... 6 1 Scope ... 7 2 Normative References ... 7 3 Terms and Definitions ... 8 4 Type, Dimension and Head Inspection ... 8 5 Technical Conditions ... 16 6 Marking and Labelling ... 17 7 Designation ... 18 Annex A (Informative) Minimum Ultimate Tensile Loads for Bolts and Screws with Full Loadability, Coarse Pitch Threads M2 and M2.5 ... 19 Bibliography ... 20

Foreword

This Document was drafted as per the rules specified in GB/T 1.1-2020 Directives for Standardization – Part 1: Rules for the Structure and Drafting of Standardizing Documents. This Document is Part 3 of GB/T 70 Hexagon Socket Screws (containing measuring gauge). GB/T 70 has published the following parts: --- GB/T 70.1 Hexagon Socket head Cap Screws; --- GB/T 70.2 Hexagon Socket Button Head Screws; --- GB/T 70.3 Hexagon Socket Countersunk Head Screws with Reduced Loadability; --- GB/T 70.4 Hexagon Socket Button Head Screws with Collar; --- GB/T 70.5 Gauging of Hexagon Sockets; --- GB/T 70.6 Hexagon Socket Head Cap Screws – Fine Pitch Thread. This Document replaced GB/T 70.3-2008 Hexagon Socket Countersunk Head Screws. Compared with GB/T 70.3-2008, this Document has the major technical changes as follows besides the structural adjustments and editorial modifications: a) It is clearly stated that hexagon socket countersunk head screws have reduced loadability due to their head design (head size and hexagon socket penetration depth) (see Clause 1 of this Edition; Clause 1 of the 2008 Edition); b) Add M2 and M2.5. Since their minimum tensile loads are not specified in GB/T 3098.1 and GB/T 3098.6, the corresponding formulas are used for calculation (see Clause 1, Table 1, Annex A of this Edition); c) Add material and technical requirements for stainless steel screws (see Clause 1, Table 4, Table 5 of this Edition); d) Add head type details (see Figure 4 of this Edition); e) Delete the shorter lengths of M4~M20 (see Table 1 of the 2008 Edition); f) Increase the actual maximum value of dk (see Table 1 and Table 2 of this Edition); g) Add head height kmin as the reference size (see Table 1 and Table 2 of this Edition); h) Use the inner wrenching depth tmax to replace the wall thickness wmin between the wrenching position and the supporting surface, which is consistent with the dimensioning method for hexalobular wrenching (see Table 1, Table 2 of this Edition; Table 1 of the 2008 Edition); i) For some threaded screws from M14 to M20, the reference value of thread length b is increased to 3d, so these screws can be subjected to tensile tests in accordance with GB/T 3098.6 (for screws with reduced loadability, b ≥ 3d is required) (see Table 2 of this Edition; Table 1 of the 2008 Edition); j) Add Da, Dk and F as gauge dimensions (see Figure 5, Table 3 of this Edition; Figure 2, Table 1 of the 2008 Edition); k) Add marking and labeling requirements (see Clause 6 of this Edition). This Document modified and adopted ISO 10642:2019 Fasteners – Hexagon socket countersunk head with reduced loadability. The technical differences and causes between this Document and ISO 10642:2019 are as follows: --- Use the normatively quoted GB/T 2 to replace ISO 4753 to adapt to China’s technical conditions (see Figure 1); --- Use the normatively quoted GB/T 16938 to replace ISO 8992 to adapt to China’s technical conditions (see Table 4); --- Use the normatively quoted GB/T 197 to replace ISO 965-1 to adapt to China's technical conditions (see Table 4); --- Use the normatively quoted GB/T 3098.1 to replace ISO 898-1 to adapt to China's technical conditions (see Table 4, Clause 6, Clause 7); --- Use the normatively quoted GB/T 3098.6 to replace ISO 3506-1 to adapt to China's technical conditions (see Table 4, Clause 6, Clause 7); --- Use the normatively quoted GB/T 3103.1 to replace ISO 4759-1 to adapt to China's technical conditions (see Table 4); --- Use the normatively referenced GB/T 5267.1 to replace ISO 4042 to adapt to China’s technical conditions (see Table 4); --- Use the normatively quoted GB/T 5267.2 to replace ISO 10683 to adapt to China’s technical conditions (see Table 4); --- Use the normatively quoted GB/T 5779.1 to replace ISO 6157-1 to adapt to China's technical conditions (see Table 4); --- Use the normatively quoted GB/T 5779.3 to replace ISO 6157-3 to adapt to China's technical conditions (see Table 4); --- Use the normatively referenced GB/T 90.1 to replace ISO 3269 to adapt to China’s Hexagon Socket Countersunk Head Screws with Reduced Loadability

1 Scope

This Document specifies the type, dimensions, technical conditions, marking, labels and signs of hexagon socket countersunk head screws with reduced loadability due to head design. This Document is applicable to hexagon socket countersunk head screws with thread specifications M2~M20; coarse threads; performance levels 8.8, 10.9 and 12.9; groups and performance levels A2-50, A4-50, A2-70, A4-70, A2-80 and A4-80, and Level-A products. NOTE 1: For other size options, see GB/T 2, GB/T 197 and GB/T 3106. NOTE 2: Reduced loadability (related to the combination of countersunk head size and hexagonal penetration depth specified in this Document) implies a limit to the minimum tensile load (see Table 5). NOTE 3: Special attention needs to be paid to ensure that the countersunk head is aligned with the countersunk hole support surface in the assembly.

2 Normative References

The provisions in following documents become the essential provisions of this Document through reference in this Document. For the dated documents, only the versions with the dates indicated are applicable to this Document; for the undated documents, only the latest version (including all the amendments) is applicable to this Document. GB/T 2 Fasteners – Ends of Parts with External Thread (GB/T 2-2016, ISO 4753:2011, MOD) GB/T 90.1 Fasteners – Acceptance Inspection (GB/T 90.1-2023, ISO 3269:2019, MOD) GB/T 90.2 Fasteners – Marking and packaging GB/T 197 General purpose metric screw threads – Tolerances (GB/T 197-2018, ISO 965- 1:2013, MOD) GB/T 1237 Designation system for fasteners (GB/T 1237-2000, eqv ISO 8991:1986) GB/T 3098.1 Mechanical properties of fasteners - Bolts, screws and studs (GB/T 3098.1- 2010, ISO 898-1:2009, MOD) GB/T 3098.6 Mechanical properties of fasteners - Stainless steel bolts, screws and studs (GB/T 3098.6-2023, ISO 3506-1:2020, MOD) GB/T 3099.4 Terminology of fasteners - Control, inspection, delivery, acceptance and quality (GB/T 3099.4-2021, ISO 1891-4:2018, MOD) GB/T 3103.1 Essential oils and aromatic extracts - Determination of residual benzene content (GB/T 3103.1-2002, idt ISO 4759-1:2000) GB/T 5267.1 Fasteners - Electroplate coating (GB/T 5267.1-2023, ISO 4042:2022, MOD) GB/T 5267.2 Fasteners - Non-electrolytically applied zinc flake coatings (GB/T 5267.2- 2021, ISO 10683:2018, MOD) GB/T 5276 Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (GB/T 5276-2015, ISO 225:2010, MOD) GB/T 5779.1 Fasteners-Surface discontinuities - Bolts, screws and studs for general requirements (GB/T 5779.1-2000, idt ISO 6157-1:1988) GB/T 5779.3 Fasteners - Surface discontinuities - Bolts, screws and studs for special requirements (GB/T 5779.3-2000, idt ISO 6157-3:1988) GB/T 16938 Fasteners - General requirements for bolts screws studs and nuts (GB/T 16938-2008, ISO 8992:2005, IDT)

3 Terms and Definitions

For the purposes of this Document, no terms and definitions apply.

4 Type, Dimension and Head Inspection

4.1 Type and dimension The type of screw shall be as per the Figures 1~4; dimension of screw shall be as per Tables 1~2. The dimension code and labelling shall be as stipulated in GB/T 5276. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 70.3-2023 be delivered?Answer: The full copy PDF of English version of GB/T 70.3-2023 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 70.3-2023_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 70.3-2023_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 70.3-2023 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 70.3-2023?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 70.3-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 70.3-2023?

A step-by-step guide to download PDF of GB/T 70.3-2023_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 70.3-2023".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9