GB/T 17263-2025 English PDFUS$679.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 17263-2025: Self-ballasted lamps for general lighting service - Performance specifications Status: Valid GB/T 17263: Historical versions
Basic dataStandard ID: GB/T 17263-2025 (GB/T17263-2025)Description (Translated English): Self-ballasted lamps for general lighting service - Performance specifications Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K71 Classification of International Standard: 29.140.30 Word Count Estimation: 34,343 Date of Issue: 2025-02-28 Date of Implementation: 2025-09-01 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 17263-2025: Self-ballasted lamps for general lighting service - Performance specifications---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.GB/T 17263-2025 English version. Self-ballasted lamps for general lighting service - Performance specifications ICS 29.140.30 CCSK71 National Standard of the People's Republic of China Replace GB/T 17263-2013 Specification for performance of self-ballasted fluorescent lamps for general lighting purposes Performance specifications Released on 2025-02-28 2025-09-01 Implementation State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Classification and model 3 5 Technical Requirements 3 6 Acceptance Rules 9 7 Requirements for production, import or export of products12 Appendix A (Normative) Start-up time test 13 Appendix B (Normative) Rise time test 15 Appendix C (Normative) General measurement conditions and test equipment requirements for photometric and electrical characteristics 17 Appendix D (Normative) Measurement of initial luminous flux, luminous efficacy and luminous flux maintenance rate 20 Appendix E (Normative) Life test 24 Appendix F (Normative) Switch Test 25 Reference 26ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 17263-2013 "Performance requirements for self-ballasted fluorescent lamps for general lighting" and is consistent with GB/T 17263-2013. In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the scope of this document (see Chapter 1, Chapter 1 of the.2013 edition); --- Changed some "Terms and Definitions" (see Chapter 3, Chapter 3 of the.2013 edition); --- Changed the inspection method of marking (see 5.2.2, 5.2.2 of the.2013 edition); --- Added the test method for ultraviolet radiation limit (see 5.11); --- Added the time (elimination date) for prohibiting the production, import or export of some products (see Chapter 7); --- Changed the requirements for measuring equipment for electrical parameters (see C.4, A.4 of the.2013 edition). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document was proposed by China Light Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Lighting Appliances (SAC/TC224). This document was drafted by. Guangdong Product Quality Supervision and Inspection Institute, Shaoxing Shangyu Jinghua Backlight Co., Ltd., National Electric Light Source Quality Supervision and Inspection Center (Beijing), Beijing Electric Light Source Research Institute Co., Ltd., and Beijing Chaoyang District High-Efficiency Lighting Technology Center. The main drafters of this document are. He Weihong, Hang Jun, Shang Zhijun, Xin Hongzheng, Shi Wei, and Yang Jianlin. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 17263-2002 in.2002 and first revised in.2013; ---This is the second revision. Specification for performance of self-ballasted fluorescent lamps for general lighting purposes1 ScopeThis document specifies the classification and model, technical requirements, and acceptance rules of self-ballasted lamps for general lighting (hereinafter referred to as "lamps"), and describes the relevant Appropriate test method. This document is applicable to general lighting in homes and similar places, with a rated voltage of 220V and a frequency of 50Hz. Lamps complying with the requirements of IEC 60061-1.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 2828.1 Sampling procedures for inspection by attributes Part 1.Sampling plans for batch inspection based on the acceptance quality limit (AQL) GB/T 2829 Periodic inspection sampling procedures and tables (applicable to the inspection of process stability) GB/T 2900.65-2023 Electrical terminology lighting GB/T 10682-2010 Performance requirements for double-capped fluorescent lamps GB/T 16844 Safety specification for self-ballasted fluorescent lamps for general lighting GB/T 17262-2011 Performance requirements for single-ended fluorescent lamps GB 17625.1-2022 Electromagnetic compatibility limits Part 1.Harmonic current emission limits (equipment input current per phase ≤ 16A) GB/T 17743 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment GB/T 18595 Electromagnetic compatibility immunity requirements for general lighting equipment GB/T 19658 Measurement method of central light intensity and beam angle of reflector lamps GB/T 22907 Photometric testing and goniophotometry of lamps GB/T 23113 Sample preparation for the detection of mercury content in discharge lamps GB/T 26178-2010 Measurement method of luminous flux IEC 60061-1 Lamp caps, lamp holders and gauges for testing their safety and interchangeability Part 1.Lamp caps and holderstogetherwithgaugesforthecontrolofinterchangeabilityandsafety-Part 1.Lampcaps) IEC 60901 Single-capped fluorescent lamps - Performance specifica- tions) CIE69 Methods of characterizing illuminance meters and luminance meters luminancemeters.Performance,characteristicsandspecifications)3 Terms and definitionsThe terms and definitions defined in GB/T 2900.65-2023 and the following apply to this document. 3.1 Self-ballasted lamp A lamp that contains a lamp holder, a light source, and the components necessary to start the light source and maintain a stable burning point, and is integrated into one piece, without damaging its structure It is not removable. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 17263-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 17263-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 17263-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 17263-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 17263-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 17263-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
