GB 19417-2025 English PDFUS$359.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB 19417-2025: General safety and technology requirements of commercial detonator Status: Valid GB 19417: Historical versions
Basic dataStandard ID: GB 19417-2025 (GB19417-2025)Description (Translated English): General safety and technology requirements of commercial detonator Sector / Industry: National Standard Classification of Chinese Standard: G89 Classification of International Standard: 71.100.30 Word Count Estimation: 17,177 Date of Issue: 2025-05-30 Date of Implementation: 2026-06-01 Older Standard (superseded by this standard): GB 19417-2003 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB 19417-2025: General safety and technology requirements of commercial detonator---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.ICS 71.100.30 CCSG89 National Standard of the People's Republic of China Replaces GB 19417-2003 General safety technical requirements for industrial detonators Released on 2025-05-30 2026-06-01 implementation State Administration for Market Regulation The National Standardization Administration issued ForewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB 19417-2003 "Detonating Cord Detonators". Compared with GB 19417-2003, except for structural adjustments and editorial changes, In addition, the main technical changes are as follows. --- Changed the scope (see Chapter 1, Chapter 1 of the.2003 edition); --- Added applicable terms and definitions (see Chapter 3); --- Changed the classification and nomenclature (see 4.1, 4.2, Chapter 3 of the.2003 edition); --- Added requirements for the material and identity information of industrial detonators (see 5.1, 5.2); --- Changed the description of appearance requirements (see 6.1, 4.1 of the.2003 edition); --- Deleted the requirements for the length of the detonating tube (see 4.2 of the.2003 edition); --- Added requirements for the insulation performance of industrial electric detonators and industrial electronic detonator leg wires (see 6.2); --- Added the requirements for the maximum non-ignition current of industrial electric detonators (see 6.3); --- Added electrostatic sensitivity of industrial electric detonators and industrial electronic detonators (see 6.4); --- Changed the requirements for seismic resistance and tensile resistance (see 6.5, 6.6, 4.3.1, 4.3.4 of the.2003 edition); --- Deleted the requirements for the detonation capability, water resistance and oil resistance of the detonator (see 4.3.2, 4.3.3 and 4.3.6 of the.2003 edition); --- Added requirements for impact resistance, drop resistance, temperature resistance and bending resistance of industrial detonators (see 6.7 to 6.10); --- Added requirements for DC voltage impulse performance, AC voltage impulse performance, and DC pulse voltage impulse performance of industrial electronic detonators (See 6.11~6.13); --- Added requirements for radio frequency sensitivity of industrial electric detonators and industrial electronic detonators (see 6.14); --- Added requirements for the safety of combustible gas for industrial detonators for coal mines (see 6.15); --- Changed the requirements for extension time (see 6.16, 4.3.5 of the.2003 edition); ---Increased the insulation performance of the foot line, the maximum non-ignition current, the electrostatic sensitivity, the seismic performance, the tensile performance, the impact resistance, and the drop resistance Energy, temperature resistance and safety performance, bending resistance, DC voltage impact performance, AC voltage impact performance, DC pulse voltage impact performance, Test methods for radio frequency sensitivity, combustible gas safety, and delay time (see 7.2 to 7.16); --- Deleted the test methods for the detonation ability, water resistance, delay time and oil resistance of the detonator (see the.2003 edition 5.4, 5.5, 5.7, 5.8); --- Changed the inspection classification (see 8.1, 6.1 of the.2003 edition); --- Deleted the inspection items, batching rules and sampling (see 6.2 to 6.4 of the.2003 edition); --- Added factory inspection and form inspection (see 8.2, 8.3); --- Added requirements for coding (see 9.1); --- Changed the requirements for signs and logos (see 9.2, 7.1 of the.2003 edition); --- Changed the requirements for accompanying documents (see 9.3, 7.2.2 of the.2003 edition); --- Changed the requirements for packaging, transportation and storage (see 10.1~10.3, 7.2.1, 7.3, 7.4 of the.2003 edition); --- Deleted the requirements for packaging inspection (see 7.2.3 of the.2003 edition); --- Deleted the supplementary provisions for the determination of the extension time (see Appendix A of the.2003 edition); --- Added the supplement to the test method for the seismic performance of industrial detonators and the supplement to the test method for the tensile performance of industrial detonators (see Appendix A, Appendix B). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the Ministry of Industry and Information Technology of the People's Republic of China. The previous versions of this document and the documents it replaces are as follows. ---First published in.2003 as GB 19417-2003; ---This is the first revision. General safety technical requirements for industrial detonators1 ScopeThis document gives the classification and nomenclature of industrial detonators, specifies safety technical requirements, inspection rules, marking (identification) and packaging, and describes the test Test method. This document applies to the scientific research, production, testing and acceptance of industrial detonators. This document is not applicable to industrial detonators for oil and gas wells or other special ranges.2 Normative referencesThe contents of the following documents constitute essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB 190 Dangerous Goods Packaging Marking GB 4387 Industrial enterprise in-plant transportation safety regulations GB 8031 Industrial electric detonators GB/T 9969 General principles for instructions for use of industrial products GB/T 10111 Generation of random numbers and their application in product quality sampling inspection GB/T 14436 General Principles for Industrial Product Warranty Documents GB/T 14659 Terminology of civil blasting equipment GB/T 18014 Polyvinyl chloride insulated wire for electric detonator detonation GB 18096 Test method for safety of combustible gas in electric detonators for use in coal mines GB/T 27602 Determination of radio frequency sensitivity of industrial electric detonators GB 28263 Safety management regulations for enterprises producing and selling civil explosives GB 50089 Safety code for engineering design of civil blasting equipment GA441 General rules for industrial detonators GA921 General Rules for Warning Labels and Registration Labels for Civilian Explosives GA1531 General Rules for Information Management of Industrial Electronic Detonators WJ/T 9010 Corrugated paper boxes for packaging industrial detonators WJ/T 9031 Classification and naming rules of industrial detonators WJ/T 9042 Test method for electrostatic sensitivity of industrial electric detonators WJ/T 9074 Test method for impact sensitivity of industrial detonators WJ/T 9085 Industrial electronic detonator WJ/T 9103 Industrial electronic detonator voltage impulse test method WJ/T 9104 Test method for drop resistance of industrial detonators WJ/T 9105 Test method for bending resistance of industrial detonators3 Terms and definitionsThe terms and definitions defined in GB/T 14659, GB 28263, GA1531 and WJ/T 9085 apply to this document. ...... |
