Chinese Standard: 'SY/T 5164-2016'
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | Related Standard |
| SY/T 5164-2016 | English | 260 |
Add to Cart
|
0--15 minutes. Auto immediate delivery.
|
Roller cone drill bits
| Valid |
SY/T 5164-2016
|
| SY/T 5164-2016 | Chinese | 20 |
Add to Cart
|
<=1-day
|
[PDF from Chinese Authority, or Standard Committee, or Publishing House]
| |
|
Google-Books (Full-PDF will be auto-delivered in 0~10 mins): SY/T 5164-2016 SY/T 5324-2013 SY/T 6996-2014 SY/T 6788-2010
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.
SY/T 5164-2016
SY
OIL-GAS INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 75.180.10
E 92
Registration number. 57610-2017
Replacing SY/T 5164-2008
Roller cone drill bits
牙轮钻头
ISSUED ON. DECEMBER 05, 2016
IMPLEMENTED ON. MAY 01, 2017
Issued by. National Energy Administration
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 5
4 Classification, model and basic size ... 8
5 Requirements ... 12
6 Test methods ... 13
7 Inspection rules ... 17
8 Marking, packaging, transport and storage ... 18
Appendix A (Normative) Drill bit diameter measurement ... 20
Appendix B (Normative) Drill bit type test index ... 21
References ... 22
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009
“Directives for standardization - Part 1. Structure and drafting of standards”.
This standard replaces SY/T 5164-2008 “Tricone bits”.
Compared with SY/T 5164-2008, the main changes of this standard are as
follows.
- MODIFY the standard name into “Roller cone drill bit”;
- MODIFY the scope;
- MODIFY the normative references;
- MODIFY some terms and definitions, ADD terms and definitions.
- MODIFY the drill bit classification, ADD the schematic diagram of the
structure of the single cone bit;
- ADD the drill bit diameter and tolerances;
- MODIFY the requirements for the roller cone drill bit and bit leg material;
- DELETE the tungsten carbide insert requirements and test methods;
- DELETE the cleaning requirements for the drill bit parts and the total mass
table of the internal residue of the sealed drill bit, DELETE the test method
and detection method for the internal cleanliness of the sealed drill bit.
- DELETE the requirement for the welding of the drill bit to the welding rod;
- ADD the weld surface mass requirements and test methods;
- ADD the vacuum indicators and vacuum detection methods;
- MODIFY the bearing life test conversion data formula;
- MODIFY the drill bit inspection item;
- MODIFY the type inspection judgment and reinspection rules.
- MODIFY the safe use period of the drill bit;
- MODIFY the bearing working life table for the drill type test;
- ADD the method for detecting the diameter of the single cone bit, MODIFY
the diameter measurement ring chart;
Roller cone drill bits
1 Scope
This standard specifies the classification, model and basic dimensions,
requirements, test methods, inspection rules, marking, packaging,
transportation and storage of roller cone drill bit.
This standard is applicable to roller cone drill bits for oil and gas drilling, it is
also suitable for roller cone drill bits for drilling in geology, mining, hydrology,
salt, geothermal and other industries.
2 Normative references
The following documents are essential to the application of this document. For
the dated documents, only the versions with the dates indicated are applicable
to this document; for the undated documents, only the latest version (including
all the amendments) are applicable to this standard.
GB/T 228.1 Metallic materials - Tensile testing - Part 1. Method of test at
room temperature (GB/T 228.1-2010, ISO 68921.2009, MOD)
GB/T 229 Metallic materials - Charpy pendulum impact test method (GB/T
229-2007, ISO 1481.2006, MOD)
GB/T 2828.1 Sampling procedures for inspection by attributes - Part 1.
Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot
inspection (GB/T 2828.1-2012, ISO 2859-1.1999, IDT)
GB/T 22512.2 Petroleum and natural gas industries - Rotary drilling
equipment - Part 2. Threading and gauging of rotary shouldered thread
connections (GB/T 22512.2-2008, ISO 10424-2.2007, MOD)
NB/T 47016 Mechanical property tests of product welded test coupons for
pressure equipment
3 Terms and definitions
The following terms and definitions apply to this document.
3.1
A rolling pair consisting of a roller and a bit leg journal surface and a cone
inner bore surface.
3.9
Journal bearing
A sliding pair consisting of the bit leg axial surface and the cone inner bore
surface.
3.10
Tungsten carbide insert
A variety of differently shaped cutting elements made of tungsten carbide.
3.11
Diamond enhanced insert
The cutting element is made of tungsten carbide as the base and the
diamond covering layer as the working surface.
3.12
Jet system
A system for increasing the jet......
|