Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Aug 1, 2020)
HOME  COVID-19   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GBT36108-2018

Chinese Standard: 'GBT36108-2018'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 36108-2018English115 Add to Cart 0--15 minutes. Auto immediate delivery. CAD software technical requirements of fixed dental restoration Valid GB/T 36108-2018
GB/T 36108-2018Chinese18 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

  Google-Books (Full-PDF will be auto-delivered in 0~10 mins):   GB/T 36108-2018  GB/T 18487.2-2017
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
GB/T 36108-2018
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 11.060.10
C 33
CAD software technical requirements
of fixed dental restoration
口腔固定修复(CAD)软件技术要求
ISSUED ON. MARCH 15, 2018
IMPLEMENTED ON. OCTOBER 1, 2018
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Normative References ... 4 
3 Terms and definitions ... 4 
4 Operating environment ... 7 
5 Technical Requirements ... 7 
6 Test methods ... 9 
Annex A (Normative) Preparation and test of standard preparation ... 11 
Bibliography ... 13 
CAD software technical requirements
of fixed dental restoration
1 Scope
This Standard specifies the terms and definitions, technical requirements, test
methods and other requirements for CAD software for fixed dental restoration.
This Standard applies to the design, development and application of CAD software for
fixed dental restoration.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 9937 (all parts), Dental vocabulary
GB/T 25000.51-2016, Systems and software engineering – Systems and software
quality requirements and evaluation (SQuaRE) – Part 51. Requirements for quality
of ready to use software product(RUSP) and instructions for testing
3 Terms and definitions
For the purposes of this document, the following terms and definitions, and those
defined in GB/T 9937, apply.
3.1
fixed dental restoration
An artificially made restoration to replace and/or restore part or all defective, missing
natural teeth, which patients can’t remove or wear by themselves.
3.2
CAD software for fixed dental restoration
A special software system with which an efficient, high-precision fixed dental
restoration digital model design can be fulfilled, in the human-computer interactive
operating mode, based on the digital dental impression established after the
inlay
A restoration which is inlaid in tooth to restore the shape and function of defective tooth.
4 Operating environment
4.1 Provision of hardware
The hardware shall be provided as follows.
a) above P4-2.0 and its PC;
b) memory more than 1 GB;
c) mouse and keyboard;
d) 24-speed CD-ROM or DVD-ROM drive or equivalent input interface;
e) dental model three-dimensional scanner or intraoral three-dimensional scanner.
4.2 Provision of software
The software shall be provided as follows.
a) operating system of Windows XP and above;
b) edition of OpenGL 2.0 and above.
5 Technical Requirements
5.1 Operating interface
5.1.1 Operating interface of the software shall have a Chinese interface at least; an
English interface can also be added if necessary.
5.1.2 The software operating process storage file names shall be file names named
in Chinese or time; English storage file names can also be provided if necessary.
5.1.3 The software shall support the retrieval of Chinese file names; the retrieval of
English file names can also be provided if necessary.
5.1.4 The terminology used in the software shall be consistent with the terminology
of GB/T 9937 and this Standard.
5.2 Performance requirements
5.2.1 In accordance with the method of Annex A, when using the even-thickness
coping/bridge function of the software to design coping/bridge of standard preparation,
6 Test methods
6.1 Operating interface test
Run the software system; check the operating interface.
6.2 Performance requirement test
6.2.1 Prepare standard preparation according to the method of Annex A; use the
software to be tested to design even-thickness coping/bridge thickened by 0.6 mm;
use a third-party measuring software to cut section evenly (perpendicular to the
rotation center direction of base crown model with an interval of 5°); extract the cervical
margin line intersection point together with the software to be tested; measure the
average of differences between the intersection point and the design curve.
6.2.2 Operators use a stopwatch for measurement; start from the end of scanned
single base crown data input and end at the end of design dat......
Related standard:   GB/T 36917.1-2018  GB/T 36917.2-2018
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020