Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Apr 4, 2020)
 HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GB/T 15923-2010

Chinese Standard: 'GB/T 15923-2010'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 15923-2010English95 Add to Cart 0--15 minutes. Auto immediate delivery. Method for chemical analysis of nickel ores. Determination of nickel content Valid GB/T 15923-2010
GB/T 15923-2010Chinese14 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]

  Google-Books (Full-PDF will be auto-delivered in 0~10 mins):   GB/T 15923-2010  GB/T 14263-2010
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
GB/T 15923-2010
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
Method for Chemical Analysis of Nickel Ores -
Determination of Nickel Content
镍矿石化学分析方法
镍量测定
ISSUED ON. NOVEMBER 10, 2010
IMPLEMENTED ON. FEBRUARY 1, 2011
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
China.
How to BUY & immediately GET a full-copy of this standard?
2. Search --> Add to Cart --> Checkout (3-steps);
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3 
1 Application Scope ... 4 
2 Normative References ... 4 
3 Principle ... 4 
4 Reagents ... 5 
5 Apparatus ... 5 
6 Samples ... 6 
7 Analytical Procedures ... 6 
8 Calculation of results ... 7 
9 Precision ... 8 
Annex A (Informative) Reference Operating Conditions for Instrument and
Interference Elimination ... 9 
Method for Chemical Analysis of Nickel Ores -
Determination of Nickel Content
Caution. The operators using this Standard shall have practical
experiences in the work in a normal laboratory. This Part has not indicated
all possible safety problems. It’s the due responsibility of the user to take
appropriate measures for safety and health, and guarantee to comply with
the conditions specified in relevant national laws and regulations.
1 Application Scope
This Standard specifies the atomic absorption spectrometric method for the
determination of nickel content in nickel ores, in which an acidic solution is prepared
after acid dissolution or alkali fusion separation.
This Standard applies to the determination of nickel in nickel ores.
The measuring range. 0.1% ~ 6.0% of nickel.
2 Normative References
The provisions in following documents become the provisions of this Standard through
reference in this Standard. For dated references, the subsequent amendments
(excluding corrigendum) or revisions do not apply to this Standard, however, parties
who reach an agreement based on this Standard are encouraged to study if the latest
versions of these documents are applicable. For undated references, the latest edition
of the referenced document applies.
GB/T 6682, Water for Analytical Laboratory Use - Specification and Test Methods
3 Principle
After sample is decomposed by hydrofluoric acid, aqua regia and perchloric acid, use
hydrochloric acid to dissolve salts (or use sodium peroxide and sodium hydroxide to
melt ores, use water to extract and filter, and use hydrochloric acid to dissolve the
sediment); in a hydrochloric acid medium of 5%, use the air-acetrylene flame to
measure the absorbance of nickel on the atomic absorption spectrometer at the
wavelength of 352.5 nm; and calculate the nickel content.
Place specimen (7.1) into corundum crucible; add 4 g of sodium peroxide (4.1); use 1
g of sodium hydroxide (4.2) to cover the top; place into a high temperature furnace
whose temperature has been raised to 650°C; maintain the temperature until fully
melted (about 10 min); and take out for cooling. Place the crucible into a 200 mL beaker;
add 100 mL of warm water; put on the watch glass; after the drastic reaction stops,
add several drops of absolute ethyl alcohol (4.7); boil on the electric furnace for 3 min
~ 5 min; and take down for cooling. Filter; use hot sodium hydroxide solution (4.11) to
wash the beaker and crucible and precipitate for 6 times ~ 8 times; use hot hydrochloric
acid (4.9) to dissolve and precipitate in the original beaker; wash out the crucible; and
place the solution on the electric hot plate to evaporate to dryness. Add 5 mL of
hydrochloric acid (4.9) and a small amount of water to dissolve salts; use water to
transfer into a 50 mL volumetric flask; dilute to volume; and shake up.
7.5 Preparation of calibration solution series
In a series of 50 mL volumetric flasks, add respectively 0.00 mL, 0.50 mL, 1.00 mL ...
10.00 mL of nickel standard solution (4.12); add 10 mL of hydrochloric acid (4.9); use
water to dilute to volume; and shake up. The mass concentrations of the serial solution
nickels are respectively 0.00 μg/mL, 5.00 μg/mL, 10.00 μg/mL ... 100.00 μg/mL.
7.6 Determination
Warning. Ignite or extinguish air-acetylene flame in accordance with the
instructions to use of the atomic absorption spectromete......
Related standard:   GB/T 15924-2010  GB/T 15925-2010
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020