Powered by Google-Search & Google-Books Chinese Standards Shop Database: 169760 (Sep 19, 2020)
HOME   Quotation   Tax   Examples Standard-List   Contact-Us   View-Cart
  

GBT1048-2019

Chinese Standard: 'GBT1048-2019'
Standard IDContents [version]USDSTEP2[PDF] delivered inStandard Title (Description)StatusRelated Standard
GB/T 1048-2019English90 Add to Cart 0--15 minutes. Auto immediate delivery. Pipework components -- Definition and selection of nominal pressure Valid GB/T 1048-2019
GB/T 1048-2019Chinese16 Add to Cart <=1-day [PDF from Chinese Authority, or Standard Committee, or Publishing House]  

  Google-Books (Full-PDF will be auto-delivered in 0~10 mins):   GB/T 1048-2019  GB/T 1047-2019  GB/T 4622.1-2009  GB/T 12385-2008  GB/T 17241.6-2008
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.  
GB/T 1048-2019
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 23.040.60
J 15
Replacing GB/T 1048-2005
Pipework components - Definition and selection of
nominal pressure
管道元件 公称压力的定义和选用
(ISO 7268:1983, Pipe components - Definition of nominal
pressure, NEQ)
ISSUED ON: MAY 10, 2019
IMPLEMENTED ON: DECEMBER 01, 2019
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3 
1 Scope ... 4 
2 Terms and definitions ... 4 
3 Nominal pressure series and selection ... 4 
Foreword
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB/T 1048-2005, Pipework components. Definition and
selection of PN. Compared with GB/T 1048-2005, the main technical changes,
except editorial changes, are as follows:
-- Add the definition of the nominal pressure that is marked by Class (see
Chapter 2);
-- Add nominal pressure values PN 160, PN 250, PN 320 and PN 400 (see
Table 1);
-- Delete PN 20, PN 50, PN 110, PN 150, PN 260 and PN 420; replace with
Class 150, Class 300, Class 600, Class 900 and Class 1500 (see Table 1,
Chapter 3 of version 2005);
-- Add preferred values for the Class series (see Table 1).
This Standard uses the redrafting method to refer to ISO 7268:1983, Pipe
components - Definition of nominal pressure, NEQ; its degree of consistency
with ISO 7268:1983 is non-equivalent.
This Standard was proposed by China Machinery Industry Federation.
This Standard shall be under the jurisdiction of National Technical Committee
237 on Pipe Fitting of Standardization Administration of China (SAC/TC 237).
The drafting organizations of this Standard: China Productivity Center for
Machinery, Sinopec Engineering Incorporation, Capital Engineering &
Research Incorporation Ltd., China Sinogy Electric Engineering Co., Ltd., China
Energy Engineering Group Guangdong Electric Power Design Institute Co., Ltd.,
Chaoda Valves Group Co., Ltd., China Institute of Marine Technology &
Economy, Saint Gobain Piping System Co., Ltd.
The drafters of this Standard: Li Junying, Feng Feng, Zhao Yong, Wu Shiming,
Li Qilue, Huang Tao, Qiu Xiaolai, Zhang Meiling, He Gen, Zhang Lanzhu.
The previous versions of the standards which are replaced by this Standard are:
-- GB/T 1048-1970, GB/T 1048-1990, GB/T 1048-2005.
Pipework components - Definition and selection of
nominal pressure
1 Scope
This Standard gives the definition of nominal pressure of the pipework
components, and specifies the nominal pressure series that are used for the
pipework components.
This Standard applies to pipework components which use PN or Class to mark
nominal pressure.
2 Terms and definitions
The following terms and definitions are applicable to this document.
2.1 Nominal pressure
A marking of combination of letters and numbers that are related to the
mechanical properties and dimensional characteristics of pipework system
components, which consists of letters PN or Class and following dimensionless
numbers.
Note 1: Unless otherwise provided in the relevant standards, dimensionless
numbers do not represent measured values and are not used for
calculation.
Note 2: Except that they are related to relevant standards of pipework
components, the letters PN or Class have no meaning.
Note 3: The maximum allowable working pressure of the pipework
components depends on the PN value or Class value of the pipework
components,............
Related standard:   GB/T 1047-2019  GB/T 9124.1-2019
   
 
Privacy   ···   Product Quality   ···   About Us   ···   Refund Policy   ···   Fair Trading   ···   Quick Response
Field Test Asia Limited | Taxed in Singapore: 201302277C | Copyright 2012-2020