Chinese Standard: 'GB5085.1-2007'
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Standard Title (Description) | Status | Related Standard |
| GB 5085.1-2007 | English | 70 |
Add to Cart
|
0--15 minutes. Auto immediate delivery.
|
Identification standards for hazardous wastes -- Identification for corrosivity
| Valid |
GB 5085.1-2007
|
| GB 5085.1-2007 | Chinese | 14 |
Add to Cart
|
<=1-day
|
[PDF from Chinese Authority, or Standard Committee, or Publishing House]
| |
|
Google-Books (Full-PDF will be auto-delivered in 0~10 mins): GB 5085.7-2019 GB 5085.1-2007 GB/T 11896-1989 GB/T 11901-1989
In 0~10 minutes time, full copy of this English-PDF will be auto-immediately delivered to your email. See samples for translation quality.
GB 5085.1-2007
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 13.060
Z 16
Replacing GB 5085.1-1996
Identification Standards for Hazardous Wastes
Identification for Corrosivity
危险废物鉴别标准 腐蚀性鉴别
ISSUED ON: APRIL 25, 2007
IMPLEMENTED ON: OCTOBER 1, 2007
Issued by: State Administration for Environmental Protection;
General Administration of Quality Supervision, Inspection and
Quarantine.
Table of Contents
Announcement of State Administration for Environmental Protection ... 3
Foreword ... 5
1 Scope ... 7
2 Normative References ... 7
3 Identification Standard ... 7
4 Test Methods ... 7
5 Implementation of Standard ... 8
Announcement of State Administration for Environmental
Protection
Year-2007 No. 37
In order to implement The Law of the People’s Republic of China on Environmental
Protection and The Law of the People’s Republic of China on the Prevention and
Control of Environmental Pollution by Solid Waste, protect the environment and protect
human health, seven standards, including Identification Standards for Hazardous
Wastes - General Specification, are hereby approved to be national technical
standards on solid waste pollution and environmental control, which are jointly issued
by General Administration of Quality Supervision, Inspection and Quarantine, and our
administration.
The title and serial No. of the standards are as follows:
1. Identification Standards for Hazardous Wastes - General Specification (GB
5085.7-2007)
2. Identification Standards for Hazardous Wastes - Identification for Corrosivity
(GB 5085.1-2007)
3. Identification Standards for Hazardous Wastes - Screening Test for Acute
Toxicity (GB 5085.2-2007)
4. Identification Standards for Hazardous Wastes - Identification for Extraction
Toxicity (GB 5085.3-2007)
5. Identification Standards for Hazardous Wastes - Identification for Ignitability (GB
5085.4-2007)
6. Identification Standards for Hazardous Wastes - Identification for Reactivity (GB
5085.5-2007)
7. Identification Standards for Hazardous Wastes - Identification for Toxic
Substance Content (GB 5085.6-2007)
In accordance with relevant provisions by law, the above standards have the
effectiveness of enforcement.
The above standards, which shall be put into effect since October 1, 2007, are
published by China Environmental Science Press. The content of the standards may
be inquired through the website of the State Administration for Environmental
Protection (website: www.sepa.gov.cn/tech/hjbz/bzwb).
Foreword
In order to implement The Law of the People’s Republic of China on Environmental
Protection and The Law of the People’s Republic of China on the Prevention and
Control of Environmental Pollution by Solid Waste, prevent and control environmental
pollution caused by hazardous wastes, reinforce the management of hazardous
wastes, protect the environment and protect human health, this Standard is formulated.
This Standard is a constituent part of the national identification standards for
hazardous wastes. The national identification standards for hazardous wastes
stipulate the technical indicators of hazardous characteristics of solid wastes. Solid
wastes whose hazardous characteristics comply with the technical indicators
stipulated in this Standard belong to hazardous wastes and shall be managed as
hazardous wastes pursuant to law. The national identification standards for hazardous
wastes are constituted of the following seven standards:
1. Identification Standards for Hazardous Wastes - General Specification
2. Identification Standards for Hazardous Wastes - Identification for Corrosivity
3. Identification Standards for Hazardous Wastes - Screening Test for Acute
Toxicity
4. Identification Standards for Hazardous Wastes - Identification for Extraction
Toxicity
5. Identification Standards for Hazardous Wastes - Identification for Ignitability
6. Identification Standards for Hazardous Wastes - Identification for Reactivity
7. Identification Standards for Hazardous Wastes - Identification for Toxic
Substance Content
This Standard is an amendment of Identification Standard for Hazardous Wastes -
Identification for Corrosivity (GB 5085.1-1996). The main content adds identification
standard and test method for steel corrosion.
In accordance with relevant provisions by law, this standard has the effectiveness of
enforcement.
This Standard was proposed by the Science and Technology Standard Office of State
Adm......
|