YBB 2027-2012 PDF English
US$135.00 · In stock · Download in 9 secondsYBB 2027-2012: PA/Al/PVC Cold-formed Foil for Solid Pharmaceutical Packaging Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
YBB 2027-2012 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
PA/Al/PVC Cold-formed Foil for Solid Pharmaceutical Packaging
| |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: YBB 2027-2012
Similar standards YBB 2027
YBB 2027-2012: PA/Al/PVC Cold-formed Foil for Solid Pharmaceutical Packaging---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/YBB2027-2012
State Food and Drug Administration
of the People’s Republic of China
Direct contact with drug’s
packaging materials and containers standard
National Institutes for Food and Drug Control
Packaging Materials and Pharmaceutical Excipients Inspection Institute
December 2012
PA/Al/PVC Cold-formed Foil for
Solid Pharmaceutical Packaging
This standard applies to the foil that is compositely made of medicinal polyvinyl chloride (PVC),
aluminum (Al), and polyamide (PA) through an adhesives. It applies to solid medicines (tablets,
capsules, suppositories, etc.) that is packaged with blister packs by cold-form.
[Appearance] Take appropriate amount of the sample. Under natural light, visually inspect it
directly. There must not have defects such as perforation, foreign bodies, smell, adhesion,
composite layer’s separation and significant damage, bubbles, wrinkles, and dirt.
[Identification] Infrared spectrum*. Take appropriate amount of the sample. Determine it
according to the Fourth Method of The Test Method for Infrared Spectrum in Packaging material
(YBB60012012). PA and PVC shall be consistent with the contrast spectrums respectively.
[Physical Properties] Water Transmission. Take appropriate amount of the sample. It shall be
determined according to Test Methods for Water Transmission’s (YBB60302012) The Second
Test Method’s test conditions to select Option B or The Fourth Method’s test conditions to select
Option 2.When testing, the side of the PVC that faces to low humidity must not exceed 0.5g /
(M2 • 24h).
Gas Transmission. Take appropriate amount of the sample. It shall be determined according to
Test Methods for Gas Transmission’s (YBB60292012) First Method (When testing, PVC shall
be faced to the low-pressure side). It must not exceed 0.5cm3 / (m2 • 24h • 0.1MPa).
Peel strength. Take appropriate amount of the sample. It shall be determined according to Tests
for Peel Strength (YBB60312012). The peel strength between PA / Al layer must not be less than
8.0N / 15mm. The peel strength between Al / PVC layer must not be less than 7.0N / 15mm. (If
the composite layer can not be peeled off or the composite layer is fractured, then the peel
strength is deemed as qualified).
Welding strength. Cut 2 slices of the sample in 100mm × 100mm. The PVC surface of the
composite foil is superimposed to the same-size pharmaceutical packaging aluminum foil
(YBB10012012). Perform the welding on heat-seal instrument. The welding temperature is
155 °C ± 5 °C. The pressure is 0.2Mpa. The time is 1 second. Cut 15mm-wide samples from the
welding area. Take the middle 3 strips to perform the test. It shall be determined according to the
Tests for Welding Strength (YBB60332012). The average value of welding strengths of 6 samples
must not be less than 6.0N / 15mm.
[Translator. This paragraph is not part of December-2012 version] [Solvent residue] Take
appropriate amount of the sample. Cut out 0.2m2 of the inner surface area. It shall be determined
according to the Test Method for Residue of Solvent in Packaging Material (YBB60062012). The
total amount of solvent residues must not exceed 5.0mg / m2; in which, the residue of benzene-
type solvents must not be detected. The detection limit of single benzene-type solvent is 0.01mg
/ m2.[Translator. This paragraph is not included in December-2012 version]
[Vinyl chloride monomer] Take appropriate amount of the sample. It shall be determined
according to Tests for Determination of vinyl chloride monomer (YBB60352012). It must not
exceed one in a million.
...... Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of YBB 2027-2012 be delivered?Answer: The full copy PDF of English version of YBB 2027-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of YBB 2027-2012_English with my colleagues?Answer: Yes. The purchased PDF of YBB 2027-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- YBB 2027-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.
How to buy and download a true PDF of English version of YBB 2027-2012?A step-by-step guide to download PDF of YBB 2027-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD). Step 2: Search keyword "YBB 2027-2012". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|