HOME   Cart(0)   Quotation   About-Us Policy PDFs Standard-List
www.ChineseStandard.net Database: 189759 (12 Oct 2025)

JJG 975-2002 PDF English

US$160.00 · In stock · Download in 9 seconds
JJG 975-2002: Chemical Oxygen Demand (COD) Meters
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid
Standard IDContents [version]USDSTEP2[PDF] deliveryName of Chinese StandardStatus
JJG 975-2002English160 Add to Cart 0-9 seconds. Auto-delivery Chemical Oxygen Demand (COD) Meters Valid

Excerpted PDFs (Download full copy in 9 seconds upon purchase)

PDF Preview: JJG 975-2002
      

Similar standards

JJG 1022   JJG 880   JJG 551   

JJG 975-2002: Chemical Oxygen Demand (COD) Meters

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/JJG975-2002
JJG NATIONAL METROLOGY VERIFICATION REGULATION OF THE PEOPLE’S REPUBLIC OF CHINA Chemical Oxygen Demand (COD) Meters Issued on: NOVEMBER 04, 2002 Implemented on: FEBRUARY 04, 2003 Issued by. General Administration of Quality Supervision, Inspection and Quarantine 3. No action is required - Full-copy of this standard will be automatically & immediately delivered to your EMAIL address in 0~60 minutes.

Table of Contents

Foreword ... 3 1 Scope ... 4 2 Overview ... 4 3 Requirements for Metrological Performance ... 5 3.1 Type-A instrument ... 5 3.2 Type B instrument ... 6 4 General Technical Conditions ... 6 4.1 Appearance... 6 4.2 Safety performance ... 6 5 Metrological Apparatus Control ... 6 5.1 Verification conditions ... 6 5.2 Verification items ... 7 5.3 Verification method ... 8 5.4 Treatment of verification result ... 11 5.5 Verification cycle ... 11 Appendix A Verification Record Format (Type-A Instrument) ... 12 Appendix B Verification Record Format (Type-B Instrument) ... 14 Appendix C Internal Page Format of Verification Certificate (Type-A Instrument) ... 15 Appendix D Internal Page Format of Verification Certificate (Type-B Instrument) ... 16 Appendix E Internal Page Format of Verification Result Notice (Type-A Instrument) ... 17 Appendix F Internal Page Format of Verification Result Notice (Type-B Instrument) ... 18 Verification Regulation of Chemical Oxygen Demand (COD) Meters

1 Scope

This Regulation is applicable to the first-time verification, follow-up verification, and in- service inspection of the chemical oxygen demand meters; while the calibration of online chemical oxygen demand meters can refer to this Regulation for implementation.

2 Overview

The chemical oxygen demand (also called COD) indicates the amount of oxidant consumed by the substance that is easy to be oxidized by the oxidant in the water; it is the important indicator to evaluate the relative content of the organic substance in the water; it is mainly used for environmental monitoring in the petroleum, chemical industry, pharmaceutical-heath areas. The chemical oxygen demand meters can be divided, according to the technical principles, into 2 types; one type is spectrophotometric principle. use certain prescribed amount of potassium dichromate, under certain conditions, to oxidize water; so that the hexavalent chromium quantification changed into trivalent chromium; use the trivalent chromium absorption peak at 610nm or hexavalent chromium absorption peak at 420nm to measure the content of COD. Such meter consists of the digestion furnace part and the measurement part; the principle drawing of its measurement part can refer to Figure 1 (hereinafter refer to as Type A). Figure 1 -- Schematic Diagram of Spectrophotometric Principle Instrument Structure The other type is electrochemical principle. use quantitative potassium dichromate, under certain conditions, to heat and reflux the digestion sample; use the ferrous ions generated by electrolysis to react with the remained hexavalent chromium; when the hexavalent chromium is completely consumed, the electrolysis comes to end. Calculate the COD content according to the consumption of the electricity. Its principle drawing can refer to Figure 2 (hereinafter referred to as Type B). Data processing system Test system Sample Filter Light source Digestion furnace 3.2 Type B instrument 3.2.1 Indication error Under the prescribed conditions, the instrument’s indication error shall not exceed ±2.0mg/L. 3.2.2 Repeatability Under the prescribed conditions, the measurement repeatability shall be no greater than 2%.

4 General Technical Conditions

4.1 Appearance The instrument shall have the following signs. instrument name, model, exit-factory number, manufacturer name, exit-factory date, sign, working voltage and frequency, etc.; the instrument appearance is exempted from the damage that shall affect the normal work. 4.2 Safety performance The insulation resistance of instrument shall be no less than 20MΩ.

5 Metrological Apparatus Control

The metrological apparatus control includes first-time verification, follow-up verification and in-service inspection. 5.1 Verification conditions 5.1.1 Equipment for verification 5.1.1.1 Thermometer. measuring range is 100~200°C (Grade-0.5). 5.1.1.2 50, 100, 300, 1000 mg/L COD solution standard substance; its uncertainty shall be no greater than 3% (k=2). 5.1.1.3 0.05mol/L 1/6K2Cr2O7 solution standard substance; its uncertainty shall be no greater than 1.0% (k=2). 5.3 Verification method 5.3.1 Appearance and routine requirements It shall be performed through visual examination. 5.3.2 Access the insulation resistance meter to the power incoming line end and the housing; turn on the instrument switch, measure the insulation resistance. 5.3.3 Type-A instrument verification method 5.3.3.1 Error of temperature indication and temperature filed uniformity After pre-heating the digestion furnace for 1h, evenly select 6 digestion holes; then separately insert the thermometer into them; after the temperature is stable; read 1 digit every 1min, totally read 3 times; then calculate their arithmetic average Ti. Calculate the error of temperature indication (ΔT) and temperature filed uniformity (W) as per Formula (1) and Formula (3). Where. T0 – setting temperature of digestion furnace, °C; - average temperature of the digestion furnace holes, °C; Ti – average temperature value for 3 times readings on the ith furnace hole, °C; n – the number of measured furnace holes. Where. Tmax – temperature indication with maximum temperature of furnace hole, °C; Tmin – temperature indication with minimum temperature of furnace hole, °C. 5.3.3.2 Error of digestion time indication After the instrument is stable, press the instrument digestion key; stop timing when the digestion comes to end; record the digestion time; repeat for 3 times. Calculate the error of digestion time relative indication (Δt) as per Formula (4). Where. Δt – error of digestion time relative indication; x0 – setting value of digestion time; - average value for 3 times measurements of digestion time. 5.3.3.3 Indication error After the instrument is stable, calibrate the instrument as per the instructions; on the 0~150mg/L shift of the instrument, separately measure the 50, 100mg/L COD solution standard substance for 3 times; on the 0~1500mg/L shift of the instrument, separately measure the 300, 1000mg/L COD solution standard substance for 3 times. Calculate the indication error ( ) as per the Formula (5). Where. - indication error of instrument; - average value of 3 times measurements; Cs – standard value of COD solution. Take the maximum value of indication error as the verification result of the indication error of instrument. 5.3.3.4 Repeatability After the instrument is stable, calibrate the instrument as per the instructions; on the 0~150mg/L shift of the instrument, measure the 100mg/L COD solution standard substance for 6 times; on the 0~1500mg/L shift of the instrument, measure the 300mg/L COD solution standard substance for 6 times. Calculate the repeatability (SA) Where. - indication error of instrument; - average value of 3 times measurements; V – the number of liter of adding 0.05mol/L 1/6K2Cr2O7 solution; 40.0 – the corresponding COD value for consumed 1.00mL of 0.050mol/L 1/6K2Cr2O7 solution. Take the maximum indication error as the verification result of indication error of the instrument. 5.3.4.2 Repeatability Add 45mL of distilled water and 17mL of concentrated sulfuric acid into the measuring cup; slightly cool off; add 7mL of 0.5mol/L ferric sulfate solution; after cooling off to the room temperature, connect the electrode as per the instructions; perform the pre- electrolysis at the constant stirring speed. Then add 1.00mL of 0.05mol/L 1/6K2Cr2O7 solution to measure; read the indication; repeat for 6 times; then calculate the repeatability (SB) as per Formula (6). 5.4 Treatment of verification result The instrument that has been verified qualified as per the requirements of this Regulation shall be issued verification certificate. The disqualified instrument shall be issued notice of verification result, which indicates the disqualified items. 5.5 Verification cycle The verification cycle is generally no more than 1 year. ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.


      

Tips & Frequently Asked Questions

Question 1: How long will the true-PDF of English version of JJG 975-2002 be delivered?

Answer: The full copy PDF of English version of JJG 975-2002 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of JJG 975-2002_English with my colleagues?

Answer: Yes. The purchased PDF of JJG 975-2002_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. www.ChineseStandard.us -- JJG 975-2002 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

How to buy and download a true PDF of English version of JJG 975-2002?

A step-by-step guide to download PDF of JJG 975-2002_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "JJG 975-2002".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9