HJ 2537-2014 PDF in English
HJ 2537-2014 (HJ2537-2014) PDF English
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| HJ 2537-2014 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Technical requirements for environmental labeling products - Water based coatings
| Valid |
Standards related to (historical): HJ 2537-2014
PDF Preview
HJ 2537-2014: PDF in English HJ 2537-2014
NATIONAL ENVIRONMENTAL PROTECTION STANDARD
OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing HJ/T 201-2005
Technical requirement for environmental
labeling products - Water based coatings
ISSUED ON: MARCH 31, 2014
IMPLEMENTED ON: JULY 01, 2014
Issued by: Ministry of Environmental Protection
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Basic requirements ... 5
5 Technical contents ... 5
6 Inspection methods ... 8
Annex A (normative) Substances that cannot be artificially added to the
products ... 9
Foreword
In order to implement the “Environmental Protection Law of the People's
Republic of China”, to reduce the impact of coatings on the environment and
human health during production and use, and to protect the environment, this
Standard has been formulated.
This Standard proposes the limit requirements for harmful substances in water
based coatings.
This Standard has revised “Technical requirement for environmental labeling
products - Water based coatings” (HJ/T 201-2005). The main changes are as
follows:
- ADJUST the scope of the standard;
- ADJUST the requirements for substances that cannot be artificially added;
- ADD the limit requirements for glycol ethers and esters;
- IMPROVE the limit requirements for volatile organic compounds;
- IMPROVE the limit requirements for the total amount of benzene, toluene,
xylene and ethylbenzene.
This Standard applies to China’s environmental labeling product certification.
This Standard was formulated by Department of Science and Technology
Standards of the Ministry of Environmental Protection.
Main drafting organization of this Standard: Environmental Development
Center of the Ministry of Environmental Protection.
This standard was approved by the Ministry of Environmental Protection on
March 31, 2014.
This Standard was implemented from July 1, 2014.
This standard is explained by the Ministry of Environmental Protection.
The previous released versions replaced by this Standard are as follows:
- HJ/T 201-2005, HBC 12-2002, HJBZ 4-1999, HJBZ 4-1994.
Technical requirement for environmental
labeling products - Water based coatings
1 Scope
This Standard specifies the terms and definitions, basic requirements, technical
contents and inspection methods of environmental labeling products of water
based coatings.
This Standard applies to water based coatings and matching putty.
This Standard does not apply to water based waterproof coatings and water
based marine coatings.
2 Normative references
The provisions in following documents become the provisions of this Standard
through reference in this Standard. For undated references, the valid versions
apply to this Standard.
GB 18582-2008 Indoor decorating and refurbishing materials - Limit of
harmful substances of interior architectural coatings
GB 18583-2008 Indoor decorating and refurbishing materials - Limit of
harmful substances of adhesives
GB 24409-2009 Limit of harmful substances of automobile coatings
GB/T 6750-2007 Paints and varnishes - Determination of density -
Pycnometer method
GB/T 9754-2007 Paints and varnishes - Determination of specular gloss of
non-metallic paint films at 20°, 60° and 85°
GB/T 23986-2009 Paints and varnishes - Determination of volatile organic
compound (VOC) content - Gas-chromatographic method
GB/T 23993-2009 Determination of formaldehyde content of waterborne
coatings - Spectrophotometric method with acetylacetone
Evaluation Index System for Cleaner Production in Coatings Industry (Trial),
6 Inspection methods
6.1 The test of volatile organic compounds (VOC) in Technical Contents 5.2 is
carried out according to the method specified in GB/T 23986-2009. The test of
density is carried out according to GB/T 6750. The test of moisture is carried
out according to Annex B of GB 18582-2008. The calculation of VOC in
architectural coatings is carried out according to 10.4 of GB/T 23986-2009; the
calculation of VOC in industrial coatings is carried out according to 10.3 in GB/T
23986-2009; the calculation of VOC in putty is carried out according to 10.2 in
GB/T 23986-2009. The test of specular gloss of interior architectural coatings
is carried out according to GB/T 9754.
6.2 The test of ethylene glycol and its esters in Technical Contents 5.2 is carried
out according to the method specified in GB 24409-2009.
6.3 The test of formaldehyde in Technical Contents 5.2 is carried out according
to the method specified in GB/T 23993-2009.
6.4 The test of benzene, toluene, xylene and ethylbenzene in Technical
Contents 5.2 is carried out according to the method specified in GB 18582-2008.
6.5 The test of halogenated hydrocarbons in Technical Contents 5.2 is carried
out according to the method specified in GB 18583-2008.
6.6 The test of lead, cadmium, chromium and mercury in Technical Contents
5.2 is carried out according to the method specified in GB 18582-2008.
6.7 Other indicators in Technical Contents are verified through document review
combined with on-site inspection.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|