HJ 209-2017 PDF English
Search result: HJ 209-2017
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| HJ 209-2017 | English | 135 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Technical requirement for environmental labeling products Plastic packaging products
| Valid |
PDF Preview: HJ 209-2017
HJ 209-2017: PDF in English HJ 209-2017
HJ
NATIONAL ENVIRONMENTAL PROTECTION
STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA
Replacing HJ/T 209-2005
Technical requirement for environmental
labelling products - Plastic packaging products
ISSUED ON. DECEMBER 11, 2017
IMPLEMENTED ON. MARCH 1, 2018
Issued by. Ministry of Environmental Protection
Table of Contents
Foreword . 3
1 Scope of application . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Basic requirements . 6
5 Technical contents .. 6
6 Test methods .. 7
Appendix A . 8
Appendix B .. 9
Foreword
To implement the “Environment Protection Law of the People's Republic of China” and
“Law of the People’s Republic of China on the Prevention and Control of Environmental
Pollution Caused by Solid Wastes”, to effectively utilize and save resources, and to reduce
the impact of plastic packaging products on environment and human health, this Standard
is formulated.
This Standard puts forward the environmental protection requirements for the raw
materials and the production process of plastic packaging products, product’s degradation
performance, bio-carbon content, printing and labelling, etc.
This Standard revises the “Technical requirement for environmental labelling products -
Packaging products (HJ/T 209-2005)”. The main changes are as follows.
- Adjust the Standard’s name and its scope of application;
- Add the requirements for the raw material and production process;
- Adjust the requirements for the degradation index of the degradation products;
- Delete the requirements for the easy-to-recycle packaging;
- Add the requirements for the biological substrate content of the non-degradable
products;
- Add the requirements for the residues of the heavy metals, polybrominated biphenyls,
polybrominated diphenyl ethers and solvent in products;
- Add the requirements for the vinyl chloride and styrene monomer in products;
- Adjust the requirements for the product’s labelling.
This Standard was organized-formulated by the Department of Science, Technology and
Standards of the Ministry of Environmental Protection of the PRC.
The main drafting organizations of this Standard. Environment Development Centre of
Ministry of Environmental Protection, The Plastic Packaging Committee of China
Packaging Federation, Beijing Cultural Development Centre of Green Business AND
Guangdong Chaozhou Quality & Measuring Supervision Testing Institution.
This Standard was approved by the Ministry of Environmental Protection of the PRC on
December 11, 2017.
This Standard shall be implemented as of March 1, 2018.
Technical requirement for environmental
labelling products - Plastic packaging products
1 Scope of application
This standard specifies the terms and definitions, basic requirements, technical contents,
and inspection methods for environmental labelling products of plastic packaging products.
This standard applies to packaging products with plastic as the main material.
2 Normative references
The provisions in following documents are referenced by this Standard. For undated
documents, the valid version applies to this Standard.
GB 9681 Hygienic standard of products of polyvinyl chloride for food packaging
GB 9692 Hygienic standard for polystyrene resin used as food packaging material
GB/T 4122.1 Packaging terms - Part 1. Basic
GB/T 10004 Plastic laminated films and pouches for packaging - dry lamination and
extrusion lamination
GB/T 16288 Marking of plastics products
GB/T 20197 Define, classify, marking and degradability requirement of degradable
plastic
GB/T 21928 Determination of phthalate esters in food plastic packaging materials
GB/T 29649 Determining the bio-based content of bio-based materials - Liquid
scintillation counters (LSC) method
HJ 2539 Technical requirement for environmental labelling products - Part 3. Gravure
printing
3 Terms and definitions
The terms and definitions specified in GB/T 4122.1-2008 and the followings are applicable
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|