HG/T 4304-2012 PDF English
US$120.00 · In stock · Download in 9 secondsHG/T 4304-2012: Anti-Corrosion technical conditions for equipment lined with polyolefine (PO) Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| HG/T 4304-2012 | English | 120 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Anti-Corrosion technical conditions for equipment lined with polyolefine (PO)
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: HG/T 4304-2012
HG/T 4304-2012: Anti-Corrosion technical conditions for equipment lined with polyolefine (PO)---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/HGT4304-2012
HG
CHEMICAL INDUSTRY STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
ICS 83.140.30
J 16
Record No.. 38695-2013
Anti-corrosion technical conditions for
equipment lined with polyolefine (PO)
Issued on: DECEMBER 28, 2012
Implemented on: JUNE 1, 2013
Issued by. Ministry of Industry and Information Technology of the
People's Republic of China
Table of Contents
Foreword ... 4
1 Scope ... 5
2 Normative references ... 5
3 Terms and definitions ... 6
4 Classification and application conditions ... 7
4.1 Classification ... 7
4.2 Marking ... 7
4.3 Structure type ... 7
4.4 Application conditions ... 8
5 Technical requirements ... 8
5.1 Appearance quality ... 8
5.2 Materials ... 9
5.3 Shell ... 9
5.4 Structure size ... 9
5.5 PO lining ... 11
5.6 Pressure resistance ... 12
6 Test methods ... 12
6.1 Appearance ... 12
6.2 Size measurement ... 12
6.3 Electric spark detection ... 12
6.4 Pressure test ... 12
6.5 Temperature resistance test ... 13
6.6 Thermal expansion and contraction test ... 13
6.7 Peel strength measurement ... 13
6.8 Health quality assessment ... 13
7 Inspection rules ... 13
7.1 Exit-factory inspection ... 13
7.2 Type inspection ... 14
8 Marks, packaging, transport, storage ... 14
8.1 Marks ... 14
8.2 Packaging ... 14
8.3 Transport ... 14
8.4 Storage ... 14
Annex A (informative) PO/C.S lining product corrosion resistance ... 15
Anti-Corrosion technical conditions for
equipment lined with polyolefine (PO)
1 Scope
This Standard specifies the terms and definitions, classification and application
conditions, technical requirements, test methods as well as inspection rules and
marks, packaging, transport, storage of anti-corrosion polyolefin (Polyolefine,
hereinafter referred to as PO) plastic-lined steel piping and equipment.
This Standard is applicable to PO rotational casting lining steel (hereinafter
referred to as C.S) piping and equipment of which the nominal pressure PN is
0.098MPa ~ 1.6MPa, temperature for use is 20°C ~ 100°C, nominal diameter
is DN25mm ~ DN8000mm.
2 Normative references
The following referenced documents are indispensable for the application of
this document. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any
amendments) applies.
GB 150, Steel pressure vessel
GB/T 700, Carbon structural steels
GB/T 1047, Pipework components - Definition and selection of DN (nominal
size)
GB/T 1048, Nominal pressure for pipe components
GB/T 1804, General Tolerances - Tolerances for Linear and Angular
Dimensions without Individual Tolerance Indications
GB/T 5117, Carbon Steel Covered Electrodes
GB/T 7122, Adhesives-Determination of peel resistance of high-strength
adhesive bonds - Floating roller method
GB/T 8163, Seamless steel tubes for liquid service
GB/T 8923, Preparation of steel substrates before application of paints and
5.2 Materials
5.2.1 PO material is made of polyolefin resin such as high-quality polyethylene
(PE) and polypropylene (PP) as the main raw materials, and is mixed with a
reasonable ratio. Its performance indicators shall meet the requirements of
Table 2. Polyethylene (PE) resin shall meet the requirements of GB/T 11115.
Polypropylene (PP) resin shall meet the requirements of GB 12670.
Table 2 -- Performance indicators of PO material
Item Melting temperature/°C Tensile strength/MPa Elongation at break/%
Performance indicator 180~220 10~18 300~500
5.2.2 Shell seamless steel pipe, flange, steel plate material is 20, Q235 or
equivalent material. And, the seamless steel pipe shall comply with the
provisions of GB/T 8163; the flange shall comply with the provisions of HG/T
20592; Q235 shall comply with the provisions of GB/T 700.
5.2.3 The selection of welding materials and their requirements shall comply
with the provisions of Annex D of GB 50236-1998 and GB 5117, respectively.
5.3 Shell
5.3.1 When the nominal diameter DN≤300, the shell uses seamless steel pipe.
5.3.2 All welds of shell manufacturing must be completed before lining
construction.
5.3.3 Shell thickness, welding process and technical requirements shall comply
with the provisions of JB/T 4735, GB 150, GB 50316 and HG/T 20678.
5.3.4 The surface to be lined shall be a smooth surface or plane. The corners
of the structure and the fillet welds must adopt a circular transition. The fillet
radius shall be no less than 5 mm.
5.3.5 The plane to be lined must be rusted. The treated surface shall meet the
St2 or BFI requirements of GB/T 8923.
5.4 Structure size
5.4.1 The nominal diameter of the piping is selected in accordance with GB/T
1047.
5.4.2 The nominal diameter of the equipment is selected in accordance with the
provisions of GB/T 9019.
5.4.3 The connection flange selects HG/ T 20592 plate flat welding flange.
Other flange types in HG/T 20592 series, other flange standards (such as GB,
JB, SY, ANSI, JIS, DIN, etc.) or special ones can also be selected according to
Table 5 -- PO lining composite indicator
Item PO lining composite indicator
Peel strength/(N/cm-50 mm/min) ≥60
NOTE. The unit in the table indicates the force used to peel the unit width (cm) sample at the peeling
speed (50 mm/min).
5.5.6 Hygienic quality
If the product is used in a place where drinking water is safe, the sanitary quality
of the PO lining shall comply with the provisions of GB/T 17219.
5.6 Pressure resistance
For the conditions for use of PO lining products, positive pressure test and
negative pressure test shall be taken separately or simultaneously. The nominal
pressure and test pressure shall meet the requirements of GB 1048.
6 Test methods
6.1 Appearance
Observe with the naked eye, in accordance with the provisions of 5.1.
6.2 Size measurement
Measurements of length and thickness with qualified measuring instruments
shall comply with the requirements of 5.4.5 and 5.5.1.
6.3 Electric spark detection
The spark detection is carried out according to the regulations of HG/T 4090.
6.4 Pressure test
6.4.1 Shell test
For the liquid test, the test pressure is 1.5 times the design pressure. After the
dwell time is reached, the casing (before the lining) shall not leak or cause
structural damage. About compress time, the piping is not less than 2 min, the
equipment is not less than 30 min.
6.4.2 Seal test
For the liquid test, the test pressure is 1. 1 times the design pressure. The test
pressure shall remain unchanged during the holding and testing, no visible
dripping. About compress time, the piping is not less than 2 min, the equipment
is not less than 30 min.
7.2 Type inspection
7.2.1 Type inspection shall be performed in one of the following situations.
a) trial model identification for new product;
b) great changes in structure, material, technique after official production
which may affect product performances;
c) once of every two years in normal production;
d) production resumed after long-term discontinued production;
e) required by national quality supervision organization.
7.2.2 Sample for type inspection shall be randomly selected from the products
that have passed the exit-factory inspection items. The number of samples is 3.
The items for type inspection are all items except sub-clause 6.8 in Clause 6.
8 Marks, packaging, transport, storage
8.1 Marks
There shall be obvious marks on the product. product name, nominal diameter
(DN), nominal pressure (PN) and manufacturer trademark, etc.
8.2 Packaging
It shall comply with the provisions of JB/T 4711. And protect the joint pipe and
flange surface of the lining pipe and equipment to avoid damage.
8.3 Transport
The product shall not be subjected to violent collision, throwing, or exposure
during transport.
8.4 Storage
Products shall be kept in a safe place and stored in a clean room. The stacking
site shall be leveled, the stacking height shall not exceed 2m, and the stacking
site shall be 1 m away from the heat source. Flange flanging surface protection
material shall not be removed, damaged or peeled off when not installed.
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of HG/T 4304-2012 be delivered?Answer: The full copy PDF of English version of HG/T 4304-2012 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of HG/T 4304-2012_English with my colleagues?Answer: Yes. The purchased PDF of HG/T 4304-2012_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- HG/T 4304-2012 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of HG/T 4304-2012?A step-by-step guide to download PDF of HG/T 4304-2012_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "HG/T 4304-2012".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|