Powered by Google www.ChineseStandard.net Database: 189760 (25 May 2024)

GB/T 953-1988 PDF in English


GB/T 953-1988 (GB/T953-1988, GBT 953-1988, GBT953-1988)
Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB/T 953-1988English70 Add to Cart 0-9 seconds. Auto-delivery. Double end studs (clamping type). Product grade C  


Standards related to: GB/T 953-1988

GB/T 953-1988: PDF in English (GBT 953-1988)

GB/T 953-1988
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
UDC 621.882
GB/T 953-88
Replacing GB 953-76
Double End Studs (clamping type) - Product Grade C
等长双头螺柱 C级
ISSUED ON. JANUARY 26, 1988
IMPLEMENTED ON. JANUARY 1, 1989
Issued by. China Machinery Industry Commission
Table of Contents
1 Subject Content ... 3 
2 Normative References ... 3 
3 Dimensions ... 3 
4 Technical Conditions ... 8 
5 Marking ... 8 
Additional information ... 9 
Double End Studs (clamping type) - Product Grade C
1 Subject Content
This Standard specifies double end studs of product grade C with the thread diameter
of M8 ~ M48.
2 Normative References
GB 196 General Purpose Screw Threads - Basic Dimensions
GB 197 General Purpose Screw Threads - Tolerances and Fits
GB 3098.1 Mechanical Properties of Fasteners - Bolts, Screws and Studs
GB 3098.6 Mechanical Properties of Fasteners - Bolts, Screws and Studs Made of
Stainless-steel
GB 3103.1 Tolerances for Fasteners - Bolts, Screws, Studs and Nuts
GB 5267 Electroplated Coatings on Threaded Fasteners
GB 5779.1 Fasteners - Surface Discontinuities - Bolts, Screws and Studs for
General Requirements
GB 1237 Designation System for Fasteners
GB 90 Acceptance Inspection, Marking and Packaging of Fasteners
3 Dimensions
Dimensions are shown in the figure below and Table 1.
......
 
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.