GB/T 701-2008 PDF English
Search result: GB/T 701-2008_English: PDF (GB/T701-2008)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 701-2008 | English | 70 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Hot rolled low carbon steel wire rods
| Valid |
| GB/T 701-1997 | English | 239 |
Add to Cart
|
2 days
|
Hot-rolled low carbon steel wire rods
| Obsolete |
| GB/T 701-1991 | English | RFQ |
ASK
|
3 days
|
Hot-rolled low carbon steel wire rods
| Obsolete |
BUY with any currencies (Euro, JPY, GBP, KRW etc.): GB/T 701-2008 Related standards: GB/T 701-2008
PDF Preview: GB/T 701-2008
GB/T 701-2008: PDF in English (GBT 701-2008) GB/T 701-2008
GB
77.140.60
H 44
NATIONAL STANDARD OF
THE PEOPLE’S REPUBLIC OF CHINA
Replacing GB/T 701-1997
Hot Rolled Low Carbon Steel Wire Rods
ISSUED ON. AUGUST 5, 2008
IMPLEMENTED ON. APRIL 1, 2009
Jointly Issued by. General Administration of Quality Supervision,
Inspection and Quarantine (AQSIQ);
Standardization Administration (SAC) of the People's
Republic of China.
Table of Contents
Foreword ...3
1 Scope ...5
2 Normative References ...5
3 Order Content ...7
4 Dimension, Shape, Weight And Allowable Deviation ...7
5 Technical Requirements ...7
6 Test Method ...8
7 Test Rules ...9
8 Packing, Marking and Quality Certificate ...9
Foreword
This Standard modifies and adopts JIS G 3505.2004 "Low carbon steel wire rods" (English
edition).
The standard is redrafted according to JIS G 3505.2004. Compared with JIS G
3505.2004, the main technical differences of this Standard are as follows.
— Due to different designation, the designation of iron and steel in China is adopted.
And the requirements in composition of some elements are adjusted;
— The requirements on the cold bending performance arrangement are added;
— The requirements on value rounding are added.
This Standard replaces GB/T 701-1997 "Hot rolled low carbon steel wire rods".
Compared with GB/T 701-1997, the main technical differences are as follows.
— The wire rods for building are deleted from the scope of application. And the scope
of application is revised as "low-carbon steel hot-rolled wire rods for deep
processing and other general purpose";
— The chapter "order content" is added;
— The steel grades are deleted. They are unified as Q195, Q215 and Q235.
Designation Q275 is added;
——The requirements in sulfur and phosphorus contents of the steel are revised;
— The tensile strength and elongation after fracture of steels are revised;
— The clause "surface quality" is revised;
— The clause "test rules" is revised. And the requirements on the mixed group of
different furnace numbers are deleted;
— The clause "smelting process" is revised. And the open-hearth furnace smelting is
deleted;
— The requirements on value rounding are added.
This Standard was proposed by China Iron & Steel Association.
This standard shall be under the jurisdiction of the State Technical Committee for
Standardization of Steel.
Drafting organizations of this Standard. Maanshan Iron & Steel Co., Ltd., Jiangsu
Yonggang Group Co., Ltd., Qingdao Iron and Steel Group Co., Ltd., Shougang Group
Co., Ltd., Anyang Iron and Steel Group Company Co. Ltd., Xuanhua Iron and Steel
Group Co., Ltd., Shandong Shiheng Special Steel Group Co., Ltd., and China
Metallurgical Information and Standardization Research Institute.
Chief drafting staffs of this Standard. Fang Tuoye, Song Qiang, Liu Yulan, Wui Huiying,
Wu Jinyuan, Zheng Shifen, Wang Liping, Cheng Dezhao, Zhai Yongzhen, Chai
Jianming, Wang Lingjun, and Dai Shifeng.
Hot Rolled Low Carbon Steel Wire Rods
1 Scope
This Standard specifies order content, dimension and shape, weight and allowable
deviation, technical requirements, test methods, test rules and packing, marking and
quality certificate of hot-rolled low-carbon steel wire rods.
This Standard is applicable to low-carbon steel hot-rolled wire rods for deep processing
and other general purpose.
This Standard is not applicable to the following products.
— hot-rolled carbon bar steel for standard part;
— steel wire rods for welding;
— cold heading steel;
— free-cutting structural steels;
— bar steel for anchor chain.
2 Normative References
The following normative documents contain provisions which, through reference in this
text, constitute provisions of this Standard. For dated reference, the subsequent
amendments (excluding correction) or revisions of these publications do not apply.
However, the parties whose enter into agreement according to these specifications are
encouraged to research whether the latest editions of these editions are applicable. For
undated references, the latest edition of the normative document referred to applies.
GB/T 222 Permissible tolerances for chemical composition of steel products
GB/T 223.3 Methods for chemical analysis of iron, steel and alloy - The
diantipyrylmethane phosphomolybdate gravimetric method for the determination of
phosphorus content
GB/T 223.5 Steel and iron - Determination of acid-soluble silicon and total silicon content
- Reduced molybdosilicate spectrophotometric method (GB/T 223.5-1997, NEQ ISO
4829-1.1986, ISO 4829-2. 1988)
GB/T 223.12 Methods for chemical analysis of iron, steel and alloy - the sodium carbonate
separation-diphenyl carbazide photometric method for the determination of chromium
content
GB/T 223.19 Methods for chemical analysis of iron steel and alloy - the neocuproine-
chloroform extraction photometric method for the determination of copper content
GB/T 223.23 Methods for chemical analysis of iron, steel and alloy - the dimethylglyoxime
spectrophotometric method for the determination of nickel content (GB/T 223.23-1994,
MOD ISO 4939. 1984)
GB/T 223.59 Methods for chemical analysis of iron, steel and alloy - The reduced
molybdoantimonyl phosphoric acid photometric method for the determination of
phosphorus content
GB/T 223.60 Methods for chemical analysis of iron, steel and alloy - the perchloric acid
dehydration gravimetric method for the determination of silicon content (GB/T 223.60-
1997, MOD ISO 439. 1994)
GB/T 223.61 Methods for chemical analysis of iron, steel and alloy - The ammonium
phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.62 Methods for chemical analysis of iron, steel and alloy - The butyl acetate
extraction photometric method for the determination of phosphorus content
GB/T 223.63 Methods for chemical analysis of iron, steel and alloy - The sodium
(potassium) periodate photometric method for the determination of manganese content
(GB/T 223.63-1988, MOD ISO 629. 1982)
GB/T 223.64 Methods for chemical analysis of iron, steel and alloy - The flame atomic
absorption spectrometric method for the determination of manganese content (GB/T
223.64 1988, MOD ISO 10700.1984)
GB/T 223.68 Methods for chemical analysis of iron, steel and alloy - The potassium iodate
titration method after combustion in the pipe furnace for the determination of sulfur content
(GB/T 223.68-1997, MOD ISO 671. 1982)
GB/T 223.69 Methods for chemical analysis of iron, steel and alloy - The gas-volumetric
method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.71 Methods for chemical analysis of iron, steel and alloy - The gravimetric
method after combustion in the pipe furnace for the determination of carbon content (GB/T
223.71-1997, MOD ISO 437. 1982)
GB/T 223.72 Methods for chemical analysis of iron, steel and alloy - The alumina
chromatographic separation-barium sulfate gravimetric method for the determination of
sulphur content
GB/T 228 Metallic materials - Tensile testing at ambient temperature (GB/T 228-2002,
eqv ISO 6892. 1998 (E))
GB/T 232 Metallic materials - Bend test (GB/T 232-1999, eqv ISO 7438. 1985 (E)) GB/T
700 Carbon Structural Steels
GB/T 2101 General requirements of acceptance, packaging, marking, and certification
for section steel
GB/T 2975 Steel and steel products - Location and preparation of test pieces for
mechanical testing (GB/T 2975-1998, eqv ISO 377. 1997)
GB/T 4336 Standard test method for spark discharge atomic emission spectrometric
analysis of carbon and low-alloy steel (routine method)
GB/T 14981 Dimensions, shape, mass and tolerances for hot-rolled wire rods
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|