GB/T 32694-2021 PDF in English
GB/T 32694-2021 (GB/T32694-2021, GBT 32694-2021, GBT32694-2021)
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivered in | Name of Chinese Standard | Status |
| GB/T 32694-2021 | English | 95 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Plug-in hybrid electric passenger cars -- Specifications
| Valid |
| GB/T 32694-2016 | English | 90 |
Add to Cart
|
0-9 seconds. Auto-delivery.
|
Plug-in hybrid electric passenger cars -- Specifications
| Obsolete |
Standards related to (historical): GB/T 32694-2021
PDF Preview
GB/T 32694-2021: PDF in English (GBT 32694-2021) GB/T 32694-2021
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 43.080.01
CCS T 47
Replacing GB/T 32694-2016
Plug-in Hybrid Electric Passenger Cars - Specifications
ISSUED ON: MARCH 09, 2021
IMPLEMENTED ON: OCTOBER 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of PRC.
Table of Contents
Foreword ... 3
1 Scope ... 5
2 Normative References ... 5
3 Terms and Definitions ... 6
4 Requirements ... 6
Plug-in Hybrid Electric Passenger Cars – Specifications
1 Scope
This Document specifies the technical requirements for plug-in (including range-
extended) hybrid electric passenger cars.
This Document is applicable to Type-M1 hybrid electric vehicles that can be externally
recharged and have pure electric drive functions.
2 Normative References
The following documents are essential to the application of this Document. For the
dated documents, only the versions with the dates indicated are applicable to this
Document; for the undated documents, only the latest version (including all the
amendments) is applicable to this Document.
GB 18352.6-2016 Limits and Measurement Methods for Emissions from Light-
Duty Vehicles (CHINA 6)
GB 18384 Electric Vehicles Safety Requirements
GB 19578 Fuel Consumption Limits for Passenger Cars
GB/T 19596 Terminology of Electric Vehicles
GB/T 19753 Test Methods for Energy Consumption of Light-Duty Hybrid Electric
Vehicles
GB/T 20234 (all parts) Connection Set for Charging - Conductive Charging of
Electric Vehicles
GB/T 31498 The Safety Requirement of Electric Vehicle Post-Crash
GB/T 34657.2 Interoperability Test Specifications of Electric Vehicle Conductive
Charging - Part 2: Vehicle
GB 38031 Electric Vehicles Traction Battery Safety Requirements
4.4 Charging interface and interoperability
The vehicle shall have an external charging function, and according to different
charging methods, its charging interface shall meet the corresponding requirements of
GB/T 20234 (all parts). Vehicle charging interoperability shall meet the requirements
of GB/T 34657.2.
4.5 Fuel consumption and emissions
4.5.1 According to the worldwide light-duty test cycle (WLTC) measured in GB/T 19753,
the OVC-HEV fuel consumption shall not exceed 45% of the light-duty vehicle fuel
consumption limit specified in GB 19578.
4.5.2 Carry out emission test in accordance with the provisions of Appendix R in GB
18352.6-2016, and the result shall meet the limit requirements of GB 18352.6-2016.
4.6 Driving mileage
4.6.1 The conditional equivalent full-electric mileage under the WLTC test cycle
measured in accordance with GB/T 19753 shall be no less than 43km, and the
conditional equivalent full-electric mileage is calculated according to Formula (1).
Where:
EAERv - the conditional equivalent full-electric mileage, in km;
v - calculate the speed condition of EAERv. In the n test cycles of the power
consumption mode test, if the engine starts at a certain speed section in the first three
speed sections of WLTC, then the calculation of ΔEREESS,v terminates at the end of such
speed section. If the engine starts only in the WLTC ultra-high speed section, then the
calculation of ΔEREESS,v terminates at the end of the power consumption mode test;
EAER - the equivalent full-electric mileage calculated according to the provisions of
GB/T 19753, in km;
ΔEREESS,v – at the time specified by the cut-off speed condition v calculated according
to the power consumption mode test specified in GB/T 19753, the amount of energy
change of REESS, in Wh;
ΔEREESS,CD – the electric energy change of REESS in the electric power consumption
mode test calculated in accordance with the provisions of GB/T19753, in Wh.
......
Source: Above contents are excerpted from the PDF -- translated/reviewed by: www.chinesestandard.net / Wayne Zheng et al.
|