GB/T 24586-2009 PDF English
US$180.00 · In stock · Download in 9 secondsGB/T 24586-2009: Iron Ores - Determination of Apparent Density, True Density and Porosity Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedureStatus: Valid
| Standard ID | Contents [version] | USD | STEP2 | [PDF] delivery | Name of Chinese Standard | Status |
| GB/T 24586-2009 | English | 180 |
Add to Cart
|
0-9 seconds. Auto-delivery
|
Iron Ores - Determination of Apparent Density, True Density and Porosity
| Valid |
Excerpted PDFs (Download full copy in 9 seconds upon purchase)PDF Preview: GB/T 24586-2009
GB/T 24586-2009: Iron Ores - Determination of Apparent Density, True Density and Porosity---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT24586-2009
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 73.060.10
D 31
Iron Ores - Determination of Apparent Density, True
Density and Porosity
ISSUED ON: OCTOBER 30, 2009
IMPLEMENTED ON: MAY 1, 2010
Issued by: General Administration of Quality Supervision, Inspection and
Quarantine;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative References ... 4
3 Apparent Density ... 4
4 True Density ... 6
5 Result Expression ... 7
6 Test Report ... 8
Appendix A (informative) Schematic Diagram of Test Equipment and Instrument
Structure ... 9
Appendix B (normative) Density of Distilled Water at Different Temperatures 12
Appendix C (informative) Derivation of Working Equation of True Density Meter
... 13
Appendix D (normative) Flow Chart of Acceptance Inspection of Sample
Analysis Value ... 15
Iron Ores - Determination of Apparent Density, True
Density and Porosity
Warning: personnel using this Standard shall have practical experience in formal
laboratory work. This Standard does not point out all possible safety issues. The
user shall undertake the responsibility of adopting appropriate safety and health
measures; guarantee the compliance with the conditions stipulated by relevant
national laws and regulations.
1 Scope
This Standard specifies the determination method of apparent density, true density and
porosity of iron ores.
This Standard is applicable to the determination of apparent density, true density and
porosity of pelletized iron ores.
2 Normative References
Through the reference in this Standard, the clauses of the following documents
become clauses of this Standard. In terms of references with a specified date, all the
subsequent modification sheets (excluding the corrected content) or revised versions
are not applicable to this Standard. However, the various parties that reach an
agreement in accordance with this Standard are encouraged to explore the possibility
of adopting the latest version of these documents. In terms of references without a
specified date, the latest version is applicable to this Standard.
GB/T 8170 Rules of Rounding off for Numerical Values & Expression and Judgement
of Limiting Values
GB/T 10122 Iron Ores (sinter and pellets) - Sampling and Sample Preparation for
Physical Testing
GB/T 10322.1 Iron Ores - Sampling and Sample Preparation Procedures (GB/T
10322.1-2000, idt ISO 3082:1998)
3 Apparent Density
3.1 Principle
After immersing water into the pores of the pelletized iron ores, respectively weigh the
3.5.2 Place the sample into the test basket; immerse the test basket that contains the
sample into distilled water; shake the test basket to remove bubbles. After placing it
still for 20 min, record the sum of the mass of the sample and the test basket as m2,
see Figure A.3 in Appendix A.
3.5.3 Remove the pelletized iron ores from the distilled water; place them
independently of each other in a pair of absorbent sponges (3.3.2). Then, use hands
to gently squeeze the sponge, so as to absorb the distilled water attached to the test
sample. Weigh and record its mass as m3.
NOTE: use fresh surface of gauze.
3.5.4 Re-immerse an empty test basket into water; record the mass of the test basket
in water as m4.
3.5.5 Measure the temperature of water in the container. Use the table in Appendix B
to obtain the density of distilled water at this temperature.
3.6 Calculation of Apparent Density
Use Formula (1) to calculate the apparent density a of the test sample.
Where,
a---apparent density, expressed in (g/cm3);
m1---mass of sample in the air, expressed in (g);
m2---sum of mass of sample and test basket in water, expressed in (g);
m3---mass of web bulb in the air, expressed in (g);
m4---mass of test basket in water, expressed in (g);
1---density of distilled water at test temperature, expressed in (g/cm3).
4 True Density
4.1 Principle
Add the sample into a container of already-known volume. Seal the container, then,
inlet a certain amount of helium gas. Use a pressure sensor to measure the pressure
in the container, then, diffuse the gas in the container to another container of already-
known pressure and volume. Use a pressure sensor to measure the equilibrium
......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Tips & Frequently Asked QuestionsQuestion 1: How long will the true-PDF of English version of GB/T 24586-2009 be delivered?Answer: The full copy PDF of English version of GB/T 24586-2009 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice. Question 2: Can I share the purchased PDF of GB/T 24586-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 24586-2009_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet. Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 24586-2009 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds. How to buy and download a true PDF of English version of GB/T 24586-2009?A step-by-step guide to download PDF of GB/T 24586-2009_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 24586-2009".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9
|