PDF Actual Sample: GB/T 16546-2020 (PDF-excerpt released/modified date: 2020-10-16/2020-10-16. Translated/reviewed by: Wayne Zheng et al.)
| Standard ID | GB/T 16546-2020 (GB/T16546-2020) |
| Description (Translated English) | General rules for packing, marking, transport, storage and quality certificates of shaped refractory |
| Sector / Industry | National Standard (Recommended) |
| Classification of Chinese Standard | Q40 |
| Classification of International Standard | 81.080 |
| Word Count Estimation | 6,637 |
| Date of Issue | 2020-06-02 |
| Date of Implementation | 2021-04-01 |
| Older Standard (superseded by this standard) | GB/T 16546-1996 |
| Drafting Organization | Institute of Information Standards for Metallurgical Industry, Shandong Refractories Group Lu Nai Kiln Co., Ltd., Sinosteel Luoyang Refractory Research Institute Co., Ltd., Zhengzhou Ruitai Refractory Technology Co., Ltd., Shanghai Lier Refractory Co., Ltd., Henan Ruitai Refractory Science and Technology Co., Ltd., University of Science and Technology Beijing, Yixing Refractory Co., Ltd., Shanghai Xintaishan High Temperature Engineering Material Co., Ltd., Ruitai Technology Co., Ltd., Haicheng Lier McSita Materials Co., Ltd. |
| Administrative Organization | National Technical Committee for Standardization of Refractory Materials (SAC/TC 193) |
| Regulation (derived from) | National Standards Announcement No. 14 of 2020 |
| Proposing organization | National Technical Committee for Standardization of Refractory Materials (SAC/TC 193) |
| Issuing agency(ies) | State Administration of Market Supervision and Administration, National Standardization Management Committee |
ENGLISH: GB/T 16546-2020 (Translated) GB/T 16546-2020
GB
NATIONAL STANDARD OF THE
PEOPLE’S REPUBLIC OF CHINA
ICS 81.080
Q 40
Replacing GB/T 16546-1996
General rules for packing, marking, transport, storage
and quality certificates of shaped refractory
定型耐火材料包装, 标志, 运输, 储存和质量证明书的一般规定
ISSUED ON: JUNE 02, 2020
IMPLEMENTED ON: APRIL 01, 2021
Issued by: State Administration for Market Regulation;
Standardization Administration of the People’s Republic of
China.
Table of Contents
Foreword ... 3
1 Scope ... 4
2 Normative references ... 4
3 Terms and definitions ... 5
4 Packing ... 5
5 Marking ... 8
6 Transport ... 8
7 Storage ... 9
8 Quality certificate ... 9
General rules for packing, marking, transport, storage
and quality certificates of shaped refractory
1 Scope
This Standard specifies general rules for packing, marking, transport, storage
and quality certificates of shaped refractory.
This Standard applies to dense and heat-insulating shaped refractory. The
relevant requirements of prefab (preform) products can also refer to this
Standard.
2 Normative references
The following documents are indispensable for the application of this document.
For dated references, only the dated version applies to this document. For
undated references, the latest edition (including all amendments) applies to this
document.
GB/T 191, Packaging - Pictorial marking for handling of goods
GB/T 1413, Series 1 freight containers - Classification, dimensions and
ratings
GB/T 2934, General-purpose flat pallets for through transit of goods -
Principal dimensions and tolerances
GB/T 3830, Calendered film (sheet) from flexible PVC
GB/T 4122.1, Packaging terms - Part 1: Basic
GB/T 4122.4, Packaging terms - Part 4: Materials and containers
GB/T 4892, Dimensions of rigid rectangular packages - Transport packages
GB/T 4995, General-purpose flat pallets for through transit of goods -
Performance requirements and selection of tests
GB/T 6388, Transport package shipping mark
GB/T 6543, Single and double corrugated boxes for transport packages
GB/T 6544, Corrugated fiberboard
GB/T 9846, Plywood for general use
GB/T 12626.2, Hard fibreboard - Part 2: General requirements for all board
types
GB/T 22344, Polyester strapping for packaging
GB/T 25820, Steel strip for packing
3 Terms and definitions
Terms and definitions determined by GB/T 4122.1 and GB/T 4122.4 are
applicable to this document.
4 Packing
4.1 General
4.1.1 The packing materials that are used for product packaging shall meet the
corresponding national environmental, safety and occupational health
requirements and standards, and can be recycled.
4.1.2 Products shall be packaged separately according to variety, designation,
brick size; packing list shall be attached to the package.
4.1.3 Before packing, properly place the products according to the brick size
and the number of packages, to ensure that the products are stacked securely.
At the same time, consider padding and rain and moisture-proof materials.
4.1.4 According to customer packing requirements, perform combined packing
according to the product masonry position, level and number.
4.1.5 Fragile, vulnerable and special refractory products, if necessary, can be
packed piece by piece before the external packing.
4.2 Packing types and technical requirements
There are generally four types of packing, pallets, wooden boxes, corrugated
boxes and containers, as shown in Table 1. According to user requirements,
other packing forms can be selected.
6.2 The transport machine shall be safe, firm and clean, and shall be equipped
with rain and moisture-proof facilities.
6.3 When transporting, it shall be handled with care; it’s not allowed to roll or be
thrown.
6.4 Bulk products or product packages in larger batches (when the
transportation mileage is far) should be transported in containers.
7 Storage
7.1 The packaged products should be stored in the warehouse; pay attention
to ventilation, and not expose them to damp, rain, wind or sun.
7.2 The stacking of packaged products shall ensure the quality, stability and
safety, and be convenient for counting, handling, shoveling and lifting
operations.
7.3 The stacking of packaged products shall be carried out according to variety,
designation, brick number and grade.
7.4 Boxes and bundles of bricks shall be stacked into a stable stack. The
stacking height shall not exceed 5 m during mechanical handling, and shall not
exceed 1.6 m during manual stacking; but the stacking height of pallets in
plastic packaging shall not exceed 3 m.
7.5 The storage conditions shall meet the special requirements of the product.
8 Quality certificate
Each batch of products shall be accompanied by a quality certificate, which
indicates:
a) name of the manufacturer;
b) name of the buyer;
c) product name, designation grade and batch number;
d) quality inspection special seal and issuer;
e) inspection result;
f) implementation standards or agreement between the supplier and the
buyer;
......
(Above excerpt released/modified date: 2020-10-16 / 2020-10-16. Translated/reviewed by: Wayne Zheng et al.)
https://www.chinesestandard.net/PDF.aspx/GBT16546-2020