HOME   Cart   Quotation   About-Us Tax PDFs Standard-List
Powered by Google-Search & Google-Books www.ChineseStandard.net Database: 189760 (9 Dec 2023)

GB 18580-2017 (GB18580-2017)

Standard IDContents [version]USDSTEP2[PDF] delivered inName of Chinese StandardStatus
GB 18580-2017English70 Add to Cart 0-9 seconds. Auto-delivery. Indoor decorating and refurbishing materials -- Limit of formaldehyde emission of wood-based panels and finishing products Valid

Buy with 99+ currencies (Euro, RMB, JPY, KRW...): GB 18580-2017
Chinese: GB 18580-2017

GB 18580-2017: PDF in English

GB 18580-2017
ICS 79.060.01
B 70
Replacing GB 18580-2001
Indoor Decorating and Refurbishing Materials –
Limit of Formaldehyde Emission of Wood-based
Panels and Finishing Products
ISSUED ON. MAY 31, 2017
Issued by. General Administration of Quality Supervision, Inspection and
Quarantine of the People's Republic of China;
Standardization Administration of the People's Republic of
3. No action is required - Full-copy of this standard will be automatically &
immediately delivered to your EMAIL address in 0~60 minutes.
Table of Contents
Foreword ... 3 
1 Application Scope ... 5 
2 Normative References ... 5 
3 Terms and Definitions ... 5 
4 Requirements ... 5 
5 Test Method ... 6 
6 Evaluation Criterion ... 6 
7 Test Report ... 6 
Annex A (Informative) Test Methods for Formaldehyde Emission for Production
Quality Control ... 7 
Article 4 of this Standard is compulsory; the others are voluntary.
This Standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This Standard replaces GB 18580-2001, Indoor Decorating and Refurbishing Materials
– Limit of Formaldehyde Emission of Wood-Based Panels and Finishing Products.
Compared with GB 18580-2001, the major changes of this Standard are as follows.
-- it cancels classification;
-- it modifies the test method of 1 m3 climate chamber into reference;
-- it cancels the 40 L desiccator method and limit values. It cancels the limit values
for the (9 ~ 11) L desiccator method and perforator extraction method;
-- the (9 ~ 11) L desiccator method and perforator extraction method only apply to
production quality control;
-- it adds the gasometric analysis method for production quality control;
-- it modifies the articles of inspection rules;
-- it cancels the articles of product marking.
The formaldehyde emission 1 m3 climate chamber method of this Standard is
consistent with ISO 12460-1.2007 Wood-based Panels – Determination of
Formaldehyde Release – Part 1. Formaldehyde Emission by the 1-cubic-meter
Chamber Method. The limit values are basically consistent with the corresponding
parts of ISO 16893.2016 Wood-based Panels – Particleboard and ISO 16895.2016
Wood-based panels -- Dry-process Fibreboard.
This Standard was proposed by the State Forestry Administration.
This Standard shall be under the jurisdiction of the National Standardization Technical
Committee on Artificial Boards (SAC/TC 198).
The drafting organizations of this Standard. Chinese Academy of Forestry Research
Institute of Wood Industry, Zhejiang Quality Testing Station of Forest Products, Jiangxi
Product Quality Supervision and Testing Institute, Nanjing Forestry University, Xuzhou
Product Quality Supervision and Testing Centre, Jiangsu Entry-exit Inspection and
Quarantine Bureau Industrial Products Testing Centre, Sichuan Shengda Forestry
Industry Co., Ltd., Dare Wood-based Panel Group Co., Ltd., Tubaobao Co., Ltd.,
Hunan Sao Paulo Wood Industry Co., Ltd., Jilin Forest Industry Co., Ltd., Krono
(Beijing) Wood Co., Ltd., Kunming Xinfeilin Panel Board Co., Ltd., Treezo Group Co.,
Ltd., Power Dekor Group Co., Ltd., Dynea Chemical Industry Co., Ltd., Asia Dekor
Indoor Decorating and Refurbishing Materials –
Limit of Formaldehyde Emission of Wood-based
Panels and Finishing Products
1 Application Scope
This Standard specifies the requirements, test method1, evaluation criterion and test
report and other contents of limit of formaldehyde emission of wood-based panels and
finishing products for indoor decoration and refurbishment.
This Standard applies to the limit of formaldehyde emission of all kinds of indoor wood-
based panels and finishing products such as fibreboards, particleboards, plywood,
blockboards, reconstituted decorative lumbers, laminated veneer lumbers, laminated
wood, surface decorated wood-based panels, wood floorings, wood wallboards and
wood doors and windows.
2 Normative References
The following referenced documents are indispensable for the application of this
document. For dated references, only the edition dated applies to this document. For
undated references, the latest edition of the referenced documents (including all
amendments) applies to this Standard.
GB/T 17657-2013, Test Methods of Evaluating the Properties of Wood-based
Panels and Surface Decorated Wood-based Panels
GB/T 18259-2009, Terms of Wood-based Panel and Its Surface Decoration
3 Terms and Definitions
For the purposes of this Standard, the terms and definitions defined in GB/T 18259-
2009 apply to this Standard.
4 Requirements
The limit of formaldehyde emission of wood-based panels and finishing products for
1 The manufacturer may use the gasometric analysis method, desiccator method or perforator extraction
method (refer to Annex A) for production control and stablish the correlation between it and the 1 m3
climate chamber method, in order to satisfy the requirements of this Standard.
(Above excerpt was released on 2017-09-02, modified on 2021-06-07, translated/reviewed by: Wayne Zheng et al.)
Source: https://www.chinesestandard.net/PDF.aspx/GB18580-2017